• Structural Engineering and Mechanics
• /
• v.47 no.5
• /
• pp.623-641
• /
• 2013

The fiber-reinforced polymer (FRP) composite panel, with the benefits of light weight, high strength, good corrosion resistance, and long-term durability, has been considered as one of the prosperous alternatives for structural retrofits and replacements. Although with these advantages, a further application of FRPs in bridge engineering may be restricted, and that is partly due to some unsatisfied thermal performance observed in recent studies. In this regard, Kansas Department of Transportation (DOT) conducted a field monitoring program on a bridge with glass FRP (GFRP) honeycomb hollow section sandwich panels. The temperatures of the panel surfaces and ambient air were measured from December 2002 to July 2004. In this paper, the temperature distributing behaviors of the panels are firstly demonstrated and discussed based on the field measurements. Then, a numerical modeling procedure of temperature fields is developed and verified. This model is capable of predicting the temperature distributions with the local environmental conditions and material's thermal properties. Finally, a parametric study is employed to examine the sensitivities of several temperature influencing factors, including the hollow section configurations, environmental conditions, and material properties.

• Journal of the Korean Chemical Society
• /
• v.44 no.4
• /
• pp.328-336
• /
• 2000

The pulsed-delayed extraction (PDE) in linear time-of-flight mass spectrometer(TOF MS) is characterized on the enhancement of resolution, mass-depth of focus and effect of instrumentahan 2000. The ion signals separate isotopically by up to molecular weight of 2500 in instrumental broadening of 5 ns, which is a good agreement with calculation. The fragmentation paths of PPG can be sug-gested by the isotopica distributions of fragment series produced when PPG desorbed from graphite surface.

• International Journal of Concrete Structures and Materials
• /
• v.6 no.3
• /
• pp.177-186
• /
• 2012

The temperature distributions of concrete structures strongly depend on the value of thermal conductivity of concrete. However, the thermal conductivity of concrete varies according to the composition of the constituents and the temperature and moisture conditions of concrete, which cause difficulty in accurately predicting the thermal conductivity value in concrete. For this reason, in this study, back-propagation neural network models on the basis of experimental values carried out by previous researchers have been utilized to effectively account for the influence of these variables. The neural networks were trained by 124 data sets with eleven parameters: nine concrete composition parameters (the ratio of water-cement, the percentage of fine and coarse aggregate, and the unit weight of water, cement, fine aggregate, coarse aggregate, fly ash and silica fume) and two concrete state parameters (the temperature and water content of concrete). Finally, the trained neural network models were evaluated by applying to other 28 measured values not included in the training of the neural networks. The result indicated that the proposed method using a back-propagation neural algorithm was effective at predicting the thermal conductivity of concrete.

• Journal of Environmental Health Sciences
• /
• v.40 no.1
• /
• pp.38-46
• /
• 2014

Objectives: This study was carried out in order to estimate atmospheric polycyclic aromatic hydrocarbon (PAH) concentrations and sources using pine needles as a passive air sampler (PAS) in urban (Pyeongtaek), semirural (Anseong) and rural (Jincheon) sites. Methods: One-year-old pine needles were collected for analysis of their PAH concentrations ($C_{p,n}g/g$ dry) at the end of December. PAHs concentrations in the ambient air ($C_a$, $ng/m^3$) were calculated with a $Log(C_p/C_a)-LogK_{oa}$ correlational equation. Results: PAHs concentrations in ambient air ($C_a$) were high, in the order of urban ($114.03ng/m^3$), semirural ($105.17ng/m^3$) and rural ($61.91ng/m^3$) sites. However, distributions of PAH isomer concentrations were very similar. PAHs of which molecular weight is smaller than 228.30 (AcPy, Acp, Flu, Phen, Ant, Flt, Pyr, BaA, Chry) made up most of the PAHs in the ambient air (96.6-98.5%). Conclusion: At urban, semirural and rural sites, it was concluded that the main source of PAHs in the ambient air ratio of each PAH isomer concentration was cars, especially diesel vehicles.

• Korean Journal of Community Nutrition
• /
• v.1 no.2
• /
• pp.178-188
• /
• 1996

Blood pressure distribution of adolescents and its several related factors including obesity were investigated through blood pressure measuring by automated oscillometric method, anthropometry, and questionnaire. Subjects were 480 female and 480 male middle school students living in Taejon. Mean values of systolic(SBP)/diastolic(DNP) blood pressure of male and female students were 118.4$\pm$11.0/69.5$\pm$9.6 mmHg and 116.9$\pm$10.4/69.5$\pm$8.6 mmHg, respectively. Their blood pressures, particularly SBP, increased with age and showed higher value in the males than in the females. All frequency distributions of SBP and DBP, by sex and age, showed normal curves and their 50th, 90th, and 95th percentiles were presented. As obese index increased, both SBP and DBP were elevated and the prevalence of hypertension which was classified by Task Force Report(1987) increased, particularly in male students. Body weight and BMI were positively correlated with both SBP and DBP, and hight was also positively correlated with SBP or DBP. Our data inicated that blood pressure and hypertension prevalence of adolescents tended to increase and various internal and external environmental factors affected them. It was emphasized that blood pressure measurement should be done in every medical examination of adolescents and the nationwide Korean standard of blood pressure for adolescents have to be prepared. (Korean J Community Nutrition 1(2) : 178-188, 1996)

• Progress in Medical Physics
• /
• v.1 no.1
• /
• pp.23-29
• /
• 1990

In order to explane the stereotactic procedure, the three steps of the procedure (target localization, dose planning, and radiation treatment) must be examined separately. The ultimate accuracy of the full procedure is dependent on each of these steps and on the consistancy of the approach The concern in this article was about dose planning, which is a important factor to the success of radiation treatment. The major factor in dose planning is a dosimetry system to evaluate the dose delivered to the target and normal tissues in the patient, while it generates an optimal dose distribution that will satisfy a set of clinical criteria for the patient. A three-dimensional treatment planning program is a prerequisite for treatment plan optimization. It must cover 3-D methods for representing the patient, the dose distributions, and beam settings. The major problems and possible modelings about 3-D factors and optimization technique were discussed to simplify and solve the problems associatied with 3-D optimization, with relative ease and efficiency. These modification can simplify the optimization problem while saving time, and can be used to develop reference dose planning system to prepare standard guideline for the selection of optimum beam parameters, such as the target position, collimator size, arc spacing, the variation in arc length and weight. The method yields good results which can then be simulated and tailored to the individual case. The procedure needed for dose planning in stereotactic radiosurgery is shown in figure 1.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.21 no.1
• /
• pp.206-216
• /
• 1997

The purpose of this study was to determine the pore size distributions (PSDs) of polyester woven fabrics by using liquid extraction method. Three types of PSDs-percent PSD, PSD per unit area of sample and PSD per unit weight of sample-were evaluated. Plain, twill and satin polyester fabrics with various fabric counts were used as specimens. Results showed that the interyarn PSDs reflected the fabric characteristics such as the fabric count and the weave type and the intrayarn PSDs reflected the thread characteristics such as the number of fibers, the fiber diameter, the thread diameter and the thread twist. Of three types of PSDs, the PSD per unit area of sample best reflect fabric and thread characteritics. As the fabric count decreased, rc increased and interyarn pore volume increased. The PSDs were skewed to the small pore sizes and the pore volumes decreased in the order of plain> twill> satin. As the number of fibers, the fiber diameter and the thread twist decreased, the intrayarn pore volumes were increased.

• Macromolecular Research
• /
• v.12 no.2
• /
• pp.178-188
• /
• 2004

We performed molecular dynamics (MD) simulations at 300 K on a series of poly(benzyl ether) (PBE) dendrimers having a different core functionalities. We used the rotational isomeric state Metropolis Monte Carlo (RMMC) method to construct the initial configuration in a periodic boundary cell (PBC) before the MD simulations were undertaken. To elucidate the effects that the structural features have on the chain dimension, the overall internal structure, and the morphology, we monitored the radii of gyration, R$\sub$g/ and the conformational changes during the simulations. The PBE dendrimers in a glassy state adopted less-extended structures when compared with the conformations obtained from the RMMC calculations. We found that R$\sub$g/ of the PBE dendrimer depends on the molecular weight, M, according to the relation, R$\sub$g/∼M$\^$0.22/. The radial distributions of the dendrimers were developed identically in the PBC, irrespective of the core functionality. A gradual decrease in radial density resulted from the fact that the terminal branch ends are distributed all over the molecule, except for the core region.

• Bulletin of the Korean Mathematical Society
• /
• v.55 no.4
• /
• pp.1189-1208
• /
• 2018

The aim of this paper is to study the class of ${\Lambda}$-constacyclic codes of length $2p^s$ over the finite commutative chain ring ${\mathcal{R}}_a=\frac{{\mathbb{F}_{p^m}}[u]}{{\langle}u^a{\rangle}}={\mathbb{F}}_{p^m}+u{\mathbb{F}}_{p^m}+{\cdots}+u^{a-1}{\mathbb{F}}_{p^m}$, for all units ${\Lambda}$ of ${\mathcal{R}}_a$ that have the form ${\Lambda}={\Lambda}_0+u{\Lambda}_1+{\cdots}+u^{a-1}{\Lambda}_{a-1}$, where ${\Lambda}_0,{\Lambda}_1,{\cdots},{\Lambda}_{a-1}{\in}{\mathbb{F}}_{p^m}$, ${\Lambda}_0{\neq}0$, ${\Lambda}_1{\neq}0$. The algebraic structure of all ${\Lambda}$-constacyclic codes of length $2p^s$ over ${\mathcal{R}}_a$ and their duals are established. As an application, this structure is used to determine the Rosenbloom-Tsfasman (RT) distance and weight distributions of all such codes. Among such constacyclic codes, the unique MDS code with respect to the RT distance is obtained.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.2
• /
• pp.142-147
• /
• 2007

In order to measure corrosion level of steel reinforcement rebar which is inside reinforced concrete structure, infrared thermographic technique was employed. Experimental test parameters were four different ambient temperatures and various levels of corrosion states (0, 1, 3, 5, 7 and 10% of weight loss). After analysis of temperature distributions of concrete surface, the amount of heat flux from the concrete surface is directly proportional to the corrosion level which is inside of concrete.