• Journal of the Korean Society of Clothing and Textiles
• /
• v.13 no.1 s.29
• /
• pp.13-33
• /
• 1989

The purpose of this study is to obtain the effects on clothing weight in the health state of the kindergartners. So 1 divided 140 kindergartners into 3 groups. A not trained of light wearing in the control group, B the semi-experimetnal group, C the experimental group. In the field surveys conducted their monthly clothing weight and anthropometric measurements, physique index (obesity index) and motor-ability and rate of cold contraction and of absence, Cornell Medical index from Jun, 1986 to Feb, 1987 in Seoul. 1) The experimental group was even less clothing than the control group in clothing weight during the training period. 2) All the experimental group droped conspicuosly the rate of cold contraction and absence during this period. 3) After this training, the experimental group was better than semi-experimental group and control group in motor-ability especially in standing broad jump, flexibility and tennis ball throw, 25 meter dash. 4) But, 1 could not find the different of anthropometric-measurements, physique-index about this train.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.308-311
• /
• 2004

It is reported that there is a limit in increasing heavy-weight impact noise isolation performance of the load bearing wall system apartments to meet the regulation of the Ministry of Construction and Transportation (MOCT). To increase the heavy-weight impact noise isolation performance, improvement in structural systems such as increasing concrete slab thickness and application of rahmen structure were proposed. In this study floor impact sound levels from toil apartments with two rahmen structure multi-story residential buildings were measured before the construction of the buildings finished. Measurements were made at living room and two bedrooms at each apartment when the finishing processes were finished. The average value of light-weight impact sound level from ten apartments was 56dB (L'$\sub$n,Aw/). The heavy-weight impact sound level was 44dB (L'$\sub$i.Fmax.Aw/) and the impact sound level of the impact ball was 41dB(L'$\sub$i.Fmax.Aw/), As a result floor impact noises at the rahmen structure system were lower than the regulation level.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.1
• /
• pp.41-47
• /
• 2019

In this paper, we propose a new batter evaluation model that reflects the skill of the opponent pitcher in Korean professional baseball. The model consists of evaluation factors such as Run Value, Contribution Score and Ball Consumption considering the pitcher grade. These evaluation factors are calculated as different data. In order to include the evaluation factors having different characteristics into one model, each evaluation factor is weighted and added. The genetic algorithms were used to calculate the weights, and the data were based on the 2016 records of Korea Professional Baseball and the salary data of the players of 2017. As a result of calculation of the weight, the weight of the Run Value was high and the weight of the Contribution Score was very low. This means that when calculating the annual salary, it reflects much of the expected score according to the batting result of the batter. On the other hand, the contribution score indicating the degree to which the batting result contributed to the victory of the team according to the state of the economy is not reflected in the salary or point system.

• Elastomers and Composites
• /
• v.57 no.4
• /
• pp.157-164
• /
• 2022

Representative bulletproof materials, such as aramid or ultra-high molecular weight polyethylene(UHMWPE), have excellent strength and modulus in the plane direction but are very vulnerable to forces applied in the thickness direction. This paper reports a study on the effects of reinforcement in the thickness direction when bulletproof composite fabrics are prepared to improve their performance. Aramid and UHMWPE fabrics were combined using the film-bonding, needle-punching, or stitching methods and then subjected to low-velocity projectile and ball-drop impact tests. The results of the low-velocity projectile test indicated that the backface signature(BFS) decreased by up to 29.2% in fabrics obtained via the film-bonding method. However, the weight of the film-bonded fabric increased by approximately 23% compared with that obtained by simple lamination, and the fabric stiffened on account of the binder. Flexibility, light weight for wearability, and excellent bulletproof performance are very important factors in the development of bulletproof materials. When the needle-punching method was used, the BFS increased as the fibers sustained damage by the needle. When the composite fabrics were combined by stitching, no significant difference in weight and thickness was observed, and the BFS showed similar results. When a diagonal stitching pattern was employed, the BFS decreased as the stitching density increased. By contrast, when a diamond stitching pattern was used, the fabric fibers were damaged and the BFS increased as the stitching density increased.

• Fibers and Polymers
• /
• v.6 no.4
• /
• pp.277-283
• /
• 2005

In order to prepare high molecular weight poly(methyl methacrylate) (PMMA)/silver nanocomposite microspheres, methyl methacrylate was suspension-polymerized in the presence of silver nanoparticles at low temperature with 2,2'-azobis(2,4-dimethylvaleronitrile) as an initiator. The rate of conversion was increased by increasing the initiator concentration. When silver nanoparticles were added, the rate of polymerization decreased slightly. High monomer conversion (about $85\%$) was obtained in spite of low polymerization temperature of $30^{\circ}C$. Under controlled conditions, PMMA/silver microspheres with various number-average degrees of polymerization (6,000-37,000) were prepared. Morphology studies revealed that except for normal suspension microspheres with a smooth surface, a golf ball-like appearance of the microspheres was observed, due to the migration and aggregation of the hydrophilic silver nanoparticles at the sublayer beneath the microsphere's surface.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.479-482
• /
• 2000

To complite the high speed cutting system, It should be solved some problems, to make light the weight of mechanism for feedrate, develop the Linear motor that bas more power, high speed control system, and high speed cutting tools, nowadays, although many high speed cutting machine is to be built by some machine maker ,they have same problems, in this study, developed the system ball screw type before the feedrate mechanism for linear motor ,so we make the basic system for Line Cents . through that, it is limited to reduce the weight of frame and their frame is to be designed differently each other to reach the purpose special material or strucutre should be contrived.

• International Journal of Fluid Machinery and Systems
• /
• v.10 no.1
• /
• pp.40-46
• /
• 2017

Small valves including ball valves, gate valves and butterfly valves have been adopted in the fields of steam power generation, petrochemical industry, carriers, and oil tankers. Butterfly valves have normally been applied to fields where in narrow places installing the existing valves such as gate valves and ball valves have proven difficult due to the surrounding area and the heavier of these valves. Butterfly valves are used to control the mass flow of the piping system under low pressure by rotating the circular disk installed inside. The butterfly valve is benefitted by having simpler structure in which the flow is controlled by rotating the disc circular plate along the center axis, whereas the weight of the valve is light compared to the gate valve and ball valve above-mentioned, as there is no additional bracket supporting the valve body. The manufacturing company needs to acquire the performance and life test equipment, in the case of adopting the improving factors to detect leakage and damage on the seat of the valve disc. However, small companies, which are manufacturing the industrial valves, normally sell their products without the life test, which is the reliability test and environment test, because of financial and manpower problems. Furthermore, the failure mode analysis of the products failed in the field is likewise problematic as there is no system collecting the failure data on sites for analyzing the failures of valves. The analyzing and researching process is not arranged systematically because of the financial problem. Therefore this study firstly tried to obtain information about the failure data from the sites, analyzed the failure mode based on the field data collected from the customers, and then obtained field data using measuring equipment. Secondly, we designed and manufactured the performance and life test equipment which also have the real time monitoring system with the naked eye for the butterfly valves. The concept of this equipment can also be adopted by other valves, such as the ball valve, gate valve, and various others. It can be applied to variously sized valves, ranging from 25 mm to large sized valves exceeding 3000 mm. Finally, this study carries out the life test with square wave pressure, using performance and life test equipment. The performance found out that the failures from the real time monitoring system were good. The results of this study can be expanded to the other valves like ball valves, gate valves, and control valves to find out the failure mode using the real time monitoring system for durability and performance tests.

• Journal of Life Science
• /
• v.22 no.9
• /
• pp.1261-1267
• /
• 2012

The aim of the present study was to investigate effects of a 12-week aerobic exercise training program and a gym-ball exercise training program on body composition, aspartate aminotransferase (AST), alanine aminotransferase (ALT), adipokines, and cardiovascular risk factors in obese children with nonalcoholic fatty liver disease. The subjects were separated into two groups, an aerobic exercise group (n=10), which practiced moderate aerobic exercise training for 12 weeks, and a gym-ball exercise group (n=13), which practiced resistance exercise training for 12 weeks. The results of the analyses are as follows: Weight, body mass index, and body fat were significantly lower (p<0.01, respectively), whereas the $VO_2$ max was higher in both groups (p<0.01). Fasting glucose, insulin and HOMA-IR levels were significantly decreased in the gym-ball exercise group (p<0.05), whereas adiponectin, AST, and ALT levels were significantly increased (p<0.05, p<0.001, p<0.001, respectively) in both groups after the 12-week exercise training program. In addition, our results showed that HOMA-IR, insulin, and concentrations of C-reactive protein (CRP) were significantly lower in both groups. They demonstrate that a 12-week program of regular aerobic exercise or gym-ball exercise yields beneficial effects such as an amelioration of cardiovascular risk factors, body indices, and liver function in obese children with nonalcoholic fatty liver disease.

• Resources Recycling
• /
• v.11 no.2
• /
• pp.45-51
• /
• 2002

This study was performed to investigate removal efficiency of wastewater by the prepared coagulant using waste oyster shell and loess. Waste oyster shell and loess contain respectively high CaO(55.43% by weight), $SiO_2$(45.30% by weight). Waste oyster shell was calcined to improve the purity of CaO at the calcination condition of $900^{\circ}C$ for 2hours, and then crushed 0.074 mm(200mesh) size by ball mill. Also, coagulant was prepared with calcined waste oyster shell and loess powder by hydration reaction. Calcined waste oyster shell and loess powder were combined with mixing ratio of 6 : 4, 7:3, 8:2 and 9:1. Though comparison experiment between prepared coagulant and chemical )$Ca(OH_2$, prepared coagulant was proved as having replaceable possibility of chemical )$Ca(OH_2$in wastewater treatment plant.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.1
• /
• pp.1-8
• /
• 2008

Planetary ball mill was used to decrease and control the particle size of excipients. The effects of the weight of sample and the revolution number of mill, and grinding time on the particle size of the ground sample were analyzed by response surface methodology. The optimum conditions for the milling of microcrystalline cellulose were 38.82 g of the weight of sample and 259 rpm of the revolution number of mill, and 45 minutes of grinding time. The predicted value of the particle size at the these conditions was $19.02{\mu}m$, of which the experimental value at the similar conditions was $18.68{\mu}m$. The tensile strength of tablets of single-component powders, such as microcrystalline cellulose, hydroxypropylmethyl cellulose and starch, binary mixtures and ground binary mixtures of these powder were measured at various relative densities. It was found that the logarithm of the tensile strength of the tablets was proportional to the relative density. A simple model, based upon Ryshkewitch-Duckworth equation that was originally proposed for porous materials, has been developed in order to predict the relationship between the tensile strength and relative density of ground binary tablets based on the properties of the constituent single-component powders. The validity of the model has been verified with experimental results for ground binary mixtures. It has demonstrated that this model can well predict the tensile strength of ground binary mixtures based upon the properties of single-component powders, such as true density, and the compositions. When the tensile strength of the mixture of microcrystalline cellulose hydroxypropylmethyl cellulose (90:10) and the ground mixture of them were compared, the tensile strength of the ground mixture decreased widely from 45.3 to 5.6% compared to the mixture in case the relative density of tablets was in the range of $0.7{\sim}0.9$. When the tensile strength of the mixture of microcrystalline cellulose starch (80:20) and the ground mixture of them were compared, the tensile strength of the ground mixture decreased widely from 31.0 to 11.6% compared to the mixture in case the relative density of tablets was in the range of $0.7{\sim}0.9$.