• Special Issue of the Society of Naval Architects of Korea
• /
• 2007.09a
• /
• pp.26-31
• /
• 2007

After CSR is in effect, a matter of concern is how many to increase in terms of weight due to apply it to the ship and what difference it is comparing between existing rule and CSR rule. The concepts of CSR are to make the ship safer, more robust. and the design requirement clearer. Furthermore it pursues longer life of ship in fatigue strength. By reasons of those, most of requirements are stronger than before. Therefore many part of ship should be reinforced and the weight of ship can be increased. Under those circumstances, the builder should make an effort to define the CSR and to find the methods to manage well this situation. In this study, we performed 3D Cargo hold and Fine-mesh F.E analysis and deduced a conclusion and introduced new detail design.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.3
• /
• pp.81-87
• /
• 2015

Load master is authorized to be controlled all of loading stuffs for safety of flight such as passenger, baggage, cargo and e.t.c. There are many things are missed even though the weight and balance is the most important process. This study analyzes how the differences of C.G. by among ten load masters of each careers. This study is tested how load-master takes load-control by the respective result based on differences of each practical experiences, gender and a number of certification. In result, all of load masters set C.G. on the stability region. But the practical experience of load master is relative to set better C.G. for economical effectiveness of weight and balance control work.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.1
• /
• pp.1-12
• /
• 2018

This paper presents a material estimation method using dual-energy X-ray images generated as a result of cargo inspection system in MeV region. We use new discrimination curve using logarithmic function rather than four discrimination curves commonly used in existing estimation algorithms. We also propose an atomic number estimation using the probability distribution of the logarithmic curve rather than linear interpolation. When the probability distribution is used as a weight, we used two methods of using the weight for the two nearest reference materials and the weight for all the reference materials. Experimental results showed that the atomic number estimation of materials using the probability distribution as a weight is more accurate than the existing methods. In order to visualize the estimated atomic number, the HSI model was used for color the resulting image.

• Proceedings of the KSR Conference
• /
• 2001.10a
• /
• pp.62-73
• /
• 2001

The scope of this study is focused on the survey of new logistics transportation systems in railroad and case studies of new systems such as piggyback system, bi-modal system swapbody, and double stack train(DST). Piggyback system, bi-modal system, swapbody, and double stack train are reviewed in term of technological validity and economic validity in Korea. Piggyback - trailer does pass loaded weight limits but does not pass train limits and can not utilize the existing freight cars. Piggyback - cargo trunk does pass all the criteria and could be developed by a domestic technology. But this study suggests to expand the length of train cars to 18.300mm for accommodation of two cargo trucks. Bi-modal system and swapbody do also pass. Double stack train could only pass the loaded weights and does not meet the train limit and the possibility of using existing freight cars. Domestic technology could not development DST, due to civil engineering construction limits and low standard height of electric line, which could not afford to operate DST.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.11a
• /
• pp.161-167
• /
• 2002

Cai-go management facility of harbor are required an expansion due to increase of cargo quantity. Design technology of Yard AGV call be possible to deal many cargo rapidly and accurately. So it is produced a profit about cal-go management. This study is presented optimum of suspension parameter for design technology Yard AGV. Model I, II are modeled about Initial of container weight, height. When the maximum stroke of suspension is 0.26m, optimum is achieved to reduce the reaction force at the minimum. Also, the reaction force is study to become stability in I second. A change of spring constant and coefficient of damper make change the reaction force and minimum reaction force appear in optimum value. All modeling and analysis are used combination. contact element of Ansys program.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1280-1285
• /
• 2003

In the developement of LNG cargo, the current concern focuses on the slim design of insulation layer to increase the LNG carrying capacity. Not only thermal stability with BOR(Boil-Off Rate) but structual stability against the LNG weight and the sloshing phenomenon must be also considered. In this paper, we applied the stitched sandwitch composite called the 3X-Board which is stitched through the core thickness direction using glass fiber to the LNG cargo. We evaluated the thermal and structural characteristics of 3X-Board by changing the core thickness and the material, in order to explore a validity for the slim design through the finite element analysis.

• Korea Trade Review
• /
• v.47 no.4
• /
• pp.35-52
• /
• 2022

Air transport is at the core of global economic growth. There is a close relationship between the flow of regional elements and the growth of the regional economy. It is easy to misestimate the impact of airports on the regional economy without considering spatial spillover effects. This study attempted to establish an asymmetric economic geographical weight matrix by applying the Spatial Durbin Model with cargo volume and passenger numbers as indicators. The influence of spillover effects on the regional economy, including direct spillover effects and indirect spillover effects are studied. The results revealed that passenger numbers and cargo volume have significant positive spillover effects on the regional economy. The driving effect of the airport on the regional economy was considered from a wider space scope. This study contributes to the scientific evaluation of the aviation economy.

• Journal of Korea Port Economic Association
• /
• v.33 no.3
• /
• pp.139-154
• /
• 2017

As competition in domestic and overseas ports intensify, new and small domestic ports are realizing certain limitations to independently secure competitiveness. This study collected data over 60 months with five modifications for container and general cargo volume around Gyeongin Port. Short-period (12 months) cargo volume was forecasted, which revealed the need for a middle-to-long-term development plan. First, the hinterland logistics complex of Gyeongin Port is expected to contribute to the coastal maritime facility through the quasi-public system for fishery product transportation and passenger services. It proposes to achieve this by opening channels to and from China for precision machinery, home network systems, LEDs, and machine industry items. second, specializing the ultra-light cargo transport route, and connecting the coastal island areas of the 5 West Sea Islands to Ara Waterway (Integrated Fishery Product Center of the 5 West Sea Islands). Third, on the basis of organic cooperation of government? local government ? port, the incentive and pre-circular support system would be required, and lastly, it shall carry out the adjustment of functions in nearby ports and specialization strategy simultaneously through the integrated operation of the ports in the capital areas.

• The Korean Journal of Air & Space Law and Policy
• /
• v.23 no.2
• /
• pp.67-92
• /
• 2008

The purpose of this paper is to research the requirements and effect of the document of carriage in respect of the carriage of cargo by air under the Montreal Convention of 1999, IATA Conditions of Carriage for Cargo, and the judicial precedents of Korea and foreign countries. Under the Article 4 of Montreal Convention, in respect of the carriage of cargo, an air waybill shall be delivered. If any other means which preserves a record of the carriage are used, the carrier shall, if so requested by the consignor, deliver to the consignor a cargo receipt. Under the Article 7 of Montreal convention, the air waybill shall be made out by the consignor. If, at the request of the consignor, the carrier makes it out, the carrier shall be deemed to have done so on behalf of the consignor. The air waybill shall be made out in three original parts. The first part shall be marked "for the carrier", and shall be signed by the consignor. The second part shall be marked "for the consignee", and shall be signed by the consignor and by the carrier. The third part shall be signed by the carrier who shall hand it to the consignor after the goods have been accepted. Under the Article 5 of Montreal Convention, the air waybill or the cargo receipt shall include (a) an indication of the places of departure and destination, (b) an indication of at least one agreed stopping place, (c) an indication of the weight of the consignment. Under the Article 10 of Montreal Convention, the consignor shall indemnify the carrier against all damages suffered by the carrier or any other person to whom the carrier is liable, by reason of the irregularity, incorrectness or incompleteness of the particulars and statement furnished by the consignor or on its behalf. Under the Article 9 of Montreal Convention, non-compliance with the Article 4 to 8 of Montreal Convention shall not affect the existence of the validity of the contract, which shall be subject to the rules of Montreal Convention including those relating to limitation of liability. The air waybill is not a document of title or negotiable instrument. Under the Article 11 of Montreal Convention, the air waybill or cargo receipt is prima facie evidence of the conclusion of the contract, of the acceptance of the cargo and of the conditions of carriage. Under the Article 12 of Montreal Convention, if the carrier carries out the instructions of the consignor for the disposition of the cargo without requiring the production of the part of the air waybill or the cargo receipt, the carrier will be liable, for any damage which may be accused thereby to any person who is lawfully in possession of that part of the air waybill or the cargo receipt. According to the precedent of Korea Supreme Court sentenced on 22 July 2004, the freight forwarder as carrier was not liable for the illegal delivery of cargo to the notify party (actual importer) on the air waybill by the operator of the bonded warehouse because the freighter did not designate the boned warehouse and did not hold the position of employer to the operator of the bonded warehouse. In conclusion, as the Korea Customs Authorities will drive the e-Freight project for the carriage of cargo by air, the carrier and freight forwarder should pay attention to the requirements and legal effect of the electronic documentation of the carriage of cargo by air.

• Journal of Digital Convergence
• /
• v.19 no.5
• /
• pp.135-144
• /
• 2021

In Korea, the parcel delivery service is showing a high growth rate every year thanks to the activation of e-commerce, but the courier unit price continues to drop. Due to the low cost of parcel delivery, there is a need for improvement to normalize courier rates due to deterioration in profitability for couriers, deterioration in service for consumers, and overwork and accidents for workers. In this study, a rational rate system model and a systematic approach were presented. The study method modeled the chargeable weight by reflecting the voulumatirc weight and revenue ton by the volume and weight of the cargo, and presented a new parcel freight charge model based on the cost of delivery. In addition, a rate-determining support system was developed that can be easily, conveniently and reasonably determined on-site. In the demonstration, the rate difference was determined by relying on weight rather than volume, and 63.5% for personal courier and 40% for B2C courier were found to be inadequate. This study could be used as an alternative to solving side effects and problems at the delivery site, in the urgent need for research on ways to improve delivery prices.