• International Journal of Naval Architecture and Ocean Engineering
• /
• v.4 no.1
• /
• pp.1-8
• /
• 2012

The hydrodynamic interaction between ship and bank can't be neglected when a vessel is app- roached toward the tip of a wedge-shaped bank in restricted waterways, such as in a harbor, near some fixed obstacles, or in a narrow channel. In this paper, the characteristic features of the hydrodynamic interaction acting on a slowly moving vessel in the proximity of a wedge-shaped bank are described and illustrated, and the effects of water depth and the spacing between ship and wedge-shaped bank are summarized and discussed based on the slender body theory. From the theoretical results, it indicated that the hydrodynamic interactions decrease as wedge-shaped bank of angle ${\beta}$ in-creases. For water depth to draft ratio less than about 2.0, the hydrodynamic interactions between ship and bank in-crease sharply as h/d decreases, regardless of the wedge-shaped bank of angle ${\beta}$. Also, for lateral separation more than about 0.2L between ship and wedge-shaped bank, it can be concluded that the bank effects decrease largely as the separation increases.

• Journal of computational fluids engineering
• /
• v.16 no.1
• /
• pp.14-21
• /
• 2011

Super-cavitating flows around under-water bodies are being studied for drag reduction and dramatic speed increase. In this paper, high speed super-cavitating flow around a two-dimensional symmetric wedge-shaped body were studied using an unsteady Reynolds-averaged Navier-Stokes equations solver based on a cell-centered finite volume method. To verify the computational method, flow over a hemispherical head-form body was simulated and validated against existing experimental data. Various computational conditions, such as different wedge angles and caviation numbers, were considered for the super-cavitating flow around the wedge-shaped body. Super-cavity begins to form in the low pressure region and propagates along the wedge body. The computed cavity lengths and velocities on the cavity boundary with varying cavitation number were validated by comparing with analytic solution.

• Journal of the Society of Naval Architects of Korea
• /
• v.53 no.3
• /
• pp.180-187
• /
• 2016

As distinct from a slender body, the separation of the boundary layer on a bluff body give rise to complex wakes in which various kinds of vortices form, develop and interact with each other. In this paper, we investigate cavitation wake field behind wedge shaped two-dimensional fin models. Eight different models are tested at the Chungnam National University Cavitation Tunnel (CNU-CT). First, we measure wake cavity shapes and compare with numerical results, which shows the good agreement with each other. In addition, we demonstrate that wake flow characteristics of the control fin are clearly identified by the correlation analysis of high-speed camera images and pressure fluctuation measurements.

• Journal of Power System Engineering
• /
• v.13 no.4
• /
• pp.24-30
• /
• 2009

본 연구에서는 기존에 널리 사용되어져 온 Wavier-Stokes 방정식을 풀이하는 전통적인 CFD 해석에서 벗어나 최근에 그 응용 분야를 넓혀가고 있는 LBM의 해석코드를 개발하고, 이를 이용하여 이차원 채널속에 놓여진 쇄기형 물체 주위의 유동특성을 조사하였다. D2Q9 격자계 및 Bhatnagar-Gross-Krook (LBGK) 모델을 채택하였으며, 수치해석 결과는 기존의 실험결과의 잘 일치하였다. 쇄기형 물체에서 와의 형성 및 방출 Reynolds 수 범위는 $32{\leq}Re{\leq}620$ 이며, 원형실린더에서 알려진 Karman 와열을 형성하는 주기적인 와방출은 대칭적인 와가 형성된 후 $Re{\geq}85$부터 시작되며 Reynolds 수의 증가에 따라 와 방출 주파수는 증가되었다.

• Korean Journal of Human Ecology
• /
• v.17 no.2
• /
• pp.315-333
• /
• 2008

This study aims at analyzing the characteristics of muscular men's somatotype to develop their clothing pattern. The body sizes of 168 men categorized as the muscular type according to the Somatotype Classification by Sheldon and Heath-Carter, were compared with the 5th Korean body size measurement (KBSM) conducted by SizeKorea in 2003, to analyze the characteristics of muscular men's somatotype. The results are as follows: 1. Compared to the 5th KBSM, the subject's body size is higher in the Chest, Upper Arm, Calf, Hip, and Thigh Circumference, and Thigh Thickness, and Waist Back and Biacromion Length, but lower in the Waist Circumference. 2. The subject group shows the characteristics of a wedge-shaped somatotype which has a broad chest and a slim waist, and of having a back more developed, longer and more curved, compared to the non-muscular men. 3. The study shows the subject group has the characteristics of both the wedged somatotype with wide chest and slim waist, and the X somatotype with projected hips and thighs.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.1
• /
• pp.36-42
• /
• 2018

Unlike a slender body, vortices are shed off alternately in the wake of a blunt body. In the case of liquid flows, when the pressure falls below the vapor pressure, cavitation occurs in the vortex core and affects the formation of the vortex street. This phenomenon is of major importance in many practical cases because the alternate shedding of vortices creates imbalanced forces on the body. Hence, it is very important to determine the shedding frequency of cavitating vortices. In this paper, the unsteady cavitating flow around a two-dimensional wedge-shaped submerged body was simulated using the commercial code STAR-CCM+. A numerical investigation of the structure of cavitating vortices was performed for a model with an apex angle of $20^{\circ}C$. The results were validated by comparing them with experimental measurements carried out at a cavitation tunnel of Chungnam National University (CNU-CT). It was found that the shedding frequency of the vortex increased by up to 18%, which was strongly affected by the development of cavitation.

• Journal of Chest Surgery
• /
• v.39 no.3 s.260
• /
• pp.248-250
• /
• 2006

A 48-years-old woman was visited to our hospital because of incidental finding of intrapulmonary foreign body. Chest X-ray showed a 4cm sized foreign body in left upper lung field without adjacent fibrosis. Chest CT showed a sewing needle shaped foreign body of metallic density, located in the 113ft upper lobe. The foreign bodies including the needle were removed surgically using a wedge resection. The extracted needle was divided into three 4 cm pieces. Patient was discharged without other respiratory symptoms after surgery. We report a case of wedge resection in a patient with intrapulmonary needle in the left upper lobe, with review of literatures.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.1
• /
• pp.26-32
• /
• 2019

The vortex flow behind a bluff body has been a subject of interest for a very long time because of its engineering applicability such as to vortex induced vibration. In the near wake of a bluff body, vortices are periodically shed in two shear layers, which originate in the trailing edges. The far wake is made up of the classical Karman vortices, which are connected together by streamwise and spanwise vortices. These vortex formations have been studied in many experimental and numerical ways. However, most of the studies considered non-cavitating flow. In this study, we investigated cavitating flow in the wake of a two-dimensional wedge. Experiments were conducted in a cavitation tunnel of Chungnam National University. Using a particle image velocimetry (PIV), we measured the velocity fields under two different flow conditions: non-cavitating and cavitating regimes. We also investigated the vortex shedding frequencies using an absolute pressure transducer mounted on the top of the test window. Throughout the experiments, it was found that the shedding frequency of the vortex was strongly affected by cavitation, and the Strouhal number could exceed its value in the non-cavitating regime.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.9
• /
• pp.2165-2172
• /
• 1995

Optimization of mesh discretization has been proposed to improve the accuracy of limit analysis solution of collapse load by using the Rigid Body Spring Model(R. B. S. M) under the plane strain condition. Moreover, the fracture behaviour of materials was investigated by employing the fracture mechanism of a spring connecting the triangular rigid body element. It has been clarified that the collapse load and the geometry of slip boundary for optimized mesh discretization were close to those of the slip line solution. Further, the wedge-shaped fracture of a cylinder under a lateral load and the central fracture of a strip in the drawing process were well simulated.

• Geomechanics and Engineering
• /
• v.24 no.5
• /
• pp.457-470
• /
• 2021

In this study, the pull-out behavior of a tunnel-type anchorage for suspension bridges was investigated using experimental tests and image processing analyses. The study focused on evaluating the initial failure behavior and failure mode of the tunnel-type anchorage. In order to evaluate the failure mode of tunnel-type anchorage, a series of scaled model tests were conducted based on the prototype anchorage of the Ulsan Grand Bridge. In the model tests, the anchorage body and surrounding rocks were fabricated using a gypsum mixture. The pull-out behavior was investigated under plane strain conditions. The results of the model tests demonstrate that the tunnel-type anchorage underwent a wedge-shaped failure. In addition, the failure mode changed according to the differences in the physical properties of the surrounding rock and the anchorage body and the size of the anchor plate. The size of the anchor plate was found to be an important parameter that determines the failure mode. However, the difference in physical properties between the surrounding rock and the anchorage body did not affect its size. In addition, this study analyzed the initial failure behavior of the tunnel-type anchorage through image analysis and confirmed that the failure was sequentially transferred from the inside of the tunnel to the surrounding rock according to the image analysis. The reasonable failure mode for the design of the tunnel-type anchorage should be wedge-type rather than pull-out type.