• 제목/요약/키워드: Wedge factor

검색결과 100건 처리시간 0.032초

직각 쐐기와 응착접촉 하는 반무한 평판 내 전위: 제1부 - 보정 함수 유도 (Dislocation in Semi-infinite Half Plane Subject to Adhesive Complete Contact with Square Wedge: Part I - Derivation of Corrective Functions)

  • 김형규
    • Tribology and Lubricants
    • /
    • 제38권3호
    • /
    • pp.73-83
    • /
    • 2022
  • This paper is concerned with an analysis of a surface edge crack emanated from a sharp contact edge. For a geometrical model, a square wedge is in contact with a half plane whose materials are identical, and a surface perpendicular crack initiated from the contact edge exists in the half plane. To analyze this crack problem, it is necessary to evaluate the stress field on the crack line which are induced by the contact tractions and pseudo-dislocations that simulate the crack, using the Bueckner principle. In this Part I, the stress filed in the half plane due to the contact is re-summarized using an asymptotic analysis method, which has been published before by the author. Further focus is given to the stress field in the half plane due to a pseudo-edge dislocation, which will provide a stress solution due to a crack (i.e. a continuous distribution of edge dislocations) later, using the Burgers vector. Essential result of the present work is the corrective functions which modify the stress field of an infinite domain to apply for the present one which has free surfaces, and thus the infiniteness is no longer preserved. Numerical methods and coordinate normalization are used, which was developed for an edge crack problem, using the Gauss-Jacobi integration formula. The convergence of the corrective functions are investigated here. Features of the corrective functions and their application to a crack problem will be given in Part II.

불임증(不姙症) 환자(患者)의 통계적(統計的) 고찰(考察);서울대학교병원(大學校病院) 불임상담실(不姙相談室) 1872 예(例)의 분석(分析) (An Analysis of Infertility Patients)

  • 장윤석;이진용;문신용;김정구;최승헌;임용택
    • Clinical and Experimental Reproductive Medicine
    • /
    • 제12권1호
    • /
    • pp.47-70
    • /
    • 1985
  • This study was presented of the 1,872 cases of infertile couples who visited and examined at the sterility clinic of Department of Obstetrics & Gynecology, Seoul National University Hospital from Sept., 1980 to Dec., 1983. Age, duration of infertility, past medical history, and other general factors were analyzed, and the factors responsible for infertility were classified and discussed. Mode of treatment, outcome of pregnancy, pregnancy rate responsible for each factor were also presented. The results were as follows: 1) The infertility was primary in 1,128, or 60.3% and secondary in 744, or 39.7%. 2) The age between 26 and 30 years of age comprised about one half of the total patients. 3) The duration of infertility between 1 and 4 years comprised about three quarters of the total patients, and the mean duration was 3.8 years. 4) The most common medical history in primary infertility was tuberculous disease, and that in secondary infertility was history of previous laparotomy. 5) About two thirds of antecedent pregnancies were abortion. 6) The major etiologic factor of infertility were male factor in 12.3%, tubal factor in 38.8%, ovulatory failure in 25.4%, uterine factor in 8.8%, cervical factor in 5.2%, peritoneal factor in 9.5%, and no demonstrable cause in 11.3%. 7) The types of male factor were azoospermia in 61.6%, oligospermia in 25.8%, low motility in 11.6%, and other abnormality in 1.0%. 8) The types of ovulatory failure were ovarian failure in 7.4%, hypothalamo-pituitary failure in 8.1 %, hypothalamo-pituitary dysfunction (including Polycystic ovarian syndrome) in 30.2%, and hyperprolactinemia in 22.4%. 9) The types of uterine factor were endometrial tuberculosis in 27.5%, uterine synechia in 33.8%, uterine anomaly in 19.7%, myoma and polyp in 9.1 %, and luteal phase defect in 9.9%. 10) The types of peritoneal factor were pelvic adhesion in 80.9% and endometriosis in 19.6%. 11) Surgeries were done in 408 patients, and they were salpingolysis, lysis of extraadnexal adhesion, salpingostomy, fimbrioplasty, ovarian wedge resection for polycystic ovarian disease, tubo-tubal anastomosis, and tubo-uterine implantation in orders. 12) 243 pregnancies were achieved during the infertility work-up, of which livebirth was 46.5%, ectopic pregnancy was 7.4%, spontaneous abortion was 7.8%, and on-going pregnancy or lost to follow-up was 36.2%. 13) Pregnancy rates in various factors were male factor in 18.7%, ovulatory factor in 31.7%, tubal factor in 24.2%, uterine factor in 34.6%, cervical factor in 19.0%, peritoneal factor in 29.0%, combined factors in 10.5%, and unexplained infertility in 37.1%. Pregnancy rate in whole patients was 25.2%.

  • PDF

ML-6M선형 가속기에서의 BEAM 특성에 대한 고찰

  • 문언철;윤병운;오양환
    • 대한방사선치료학회지
    • /
    • 제5권1호
    • /
    • pp.115-119
    • /
    • 1992
  • The beam characteristics and dosimetric measurements of the 6MV X-ray and 6MeV electron beam from a ML-6M linear accelerator are examined. The Percent Depth Dose(PDD) table and the tissue Maximum Ratio(TMR) table are taken from measurement as a function of the field size and the depth. The calculated TMR table from PDD table is compared with those from measurement. Other beam characteristics such as output factor, beam profile(including flatness, symmetry and penumbra), wedge, and the variation of Dmax are presented. All of these dosimetric measurements sufficiently characterized the beam to permit safe clinical use.

  • PDF

Mevatron KD 선형 가속기에서의 10MV X-선 특성 (Charateristics of 10MV X-ray Beam from a Mevatron KD Linear Accelerator)

  • 이병용;이명자
    • Radiation Oncology Journal
    • /
    • 제6권1호
    • /
    • pp.101-108
    • /
    • 1988
  • The beam characteristics and dosimetric measurements of the 10MV X-ray beam from a Mevatron KD linear accelerator are examined. The Percent Depth Dose (POD) table and the Tissue Maximum Ratio (TMR) table are taken from measurement as a function of the field size and the depth. The calculated TMR table from PDD table is compared with those from measurement. Other beam characteristics such as output factor, beam profile (including flatness, symmetry and penumbra), wedge, and the variation of Dmax are presented.

  • PDF

포스트텐션용 정착구의 하중전달 특성에 관한 연구 (Load Transfer Characteristics of Post-Tensioning Anchorage)

  • 김민수;김진근;유영섭;이상순
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2000년도 봄 학술발표회 논문집
    • /
    • pp.657-662
    • /
    • 2000
  • This paper presents the results from experimental study that investigated to explore the load transfer characteristics of post-tensioning anchorage zones. The experimental program investigated the primary variables which affect the ultimate load, lateral strains and crack width: concrete compressive strength, details of reinforcement and shape of anchorage. Through this research, it was found that the governing factor of the ultimate load was not compressive cylinder strength but tensile splitting strength. Ultimate load was increased and lateral strain was decreased as the ratio of spiral increased because the lateral expansion of th concrete inside the spiral was restrained by the spiral. Furthermore, the shape of anchorage which can diminish the wedge effect of anchorage and disperse the anchorage force in various depths was more effective.

  • PDF

불연속면의 비선형 전단강도를 이용한 암반사면 쐐기파괴 확률 해석 (Wedge Failure Probability Analysis for Rock Slope Based on Non-linear Shear Strength of Discontinuity)

  • 윤우현;천병식
    • 한국지반공학회논문집
    • /
    • 제19권6호
    • /
    • pp.151-160
    • /
    • 2003
  • 암반사면의 대표적인 파괴유형인 쐐기파괴에 대한 확률론적 안정 해석 수행 과정에서 가장 주요한 불연속면의 특성인 전단 강도에 대해 Mohr-Coulomb 모델에 의한 선형적 강도특성과 Barton모델에 의한 비선형적 강도특성이 사면의 안정성 해석에 주는 영향을 비교하고자 하였다. 사면 안정성 해석의 방법으로 결정론적 해석과 Monte Carlo Simulation을 이용한 확률론적 해석을 수행하였으며, 불연속면의 통계적 분석을 수행한 후 $x^2$ 검증을 통해 분포함수를 검증하였다. 해석 대상 사면은 중앙선 O O공구로, 불연속면의 특성을 파악하기 위해 BIPS, DOM, Scanline, 절리면 직접전단 시험자료를 사용하였다. Mohr-Coulomb, Barton모델에 의한 결정론적 해석 결과는 모두 안정한 것으로 나타났으나, 확률론적 해석 결과 두 모델 모두 5% 이상의 파괴확률을 나타냄으로서 잠재적인 불안정성을 가지는 것으로 평가되었다. 또한 Mohr-Coulomb의 모델이 Barton의 모델보다 더 큰 파괴확률을 가지는 것으로 나타났다. 불연속면의 전단강도 정수 산정시 Mohr-Coulomb의 모델은 한정된 실내시험 자료를 가지게 되고, 정확한 점착력의 산정이 어려운 점, 파괴블록의 규모가 작은 경우 안전율이 지나치게 과대 평가될 가능성 등이 있으므로, 합리적인 사면 안정성 해석을 위해서는 강도정수 산정시 적절한 모델 선택이 중요하다.

편마암지역 자연사면.절취사면의 안정성 분석 사례 (Analysis of Rock Slope Stability for Natural Slope and Cut Slope of Gneiss Area in Andong, Korea)

  • 김만일;배두원;김종태;채병곤;정교철
    • 지질공학
    • /
    • 제17권2호
    • /
    • pp.289-297
    • /
    • 2007
  • 매년 강우로 인해 발생되는 사면파괴는 많은 재산피해와 인명피해를 발생시키고 있다. 사면재해로부터의 피해저감을 위해 인간의 생활권과 인접한 사면에 대한 지속적인 관리를 통해 이들의 안정성 검토와 보강 대책이 요구된다. 연구지역은 편마암으로 이루어진 암반사면으로써 단층작용으로 인해 대규모 절리군이 형성되어 있는 풍화암 내지 연암의 풍화 특성을 보여준다. 조사사면을 자연사면과 절취사면으로 구분하여 현장자료를 검토한 결과, 자연사면에서는 주 절리군이 형성된 4개 지점에서 평면파괴와 쐐기파괴 가능성이 우세하였으며, 절취사면의 경우 8개 지점에서 쐐기파괴 발생 가능성이 높게 나타났다. 또한 SLIDE 2D에 적용해 이들 사면의 최소안전율에 대한 수치해석 결과에서는 자연사면보다 절취사면의 안정성이 비교적 취약한 것으로 분석되었다.

Determination of double-K fracture parameters of concrete using split-tension cube test

  • Kumar, Shailendra;Pandey, S.R.
    • Computers and Concrete
    • /
    • 제9권2호
    • /
    • pp.81-97
    • /
    • 2012
  • This paper presents development of double-K fracture model for the split-tension cube specimen for determining the unstable fracture toughness and initial cracking toughness of concrete. There are some advantages of using of split-tension cube test like compactness and lightness over the existing specimen geometries in practice such as three-point bend test, wedge splitting test and compact tension specimen. The cohesive toughness of the material is determined using weight function having four terms for the split-tension cube specimen. Some empirical relations are also suggested for determining geometrical factors in order to calculate stress intensity factor and crack mouth opening displacement for the same specimen. The results of double-K fracture parameters of split-tension cube specimen are compared with those obtained for compact tension specimen. Finally, the influence of the width of the load-distribution of split-tension cube specimen on the double-K fracture parameters for laboratory size specimens is investigated. The input data required for determining double-K fracture parameters for both the specimen geometries are obtained using well known version of the Fictitious Crack Model.

전기습윤 현상에서의 선장력과 전기 이중층의 영향에 대한 해석 (Analysis of Effects of Line Tension and Electrical Double Layers on Electrowetting Phenomenon)

  • 정상국;강관형;이정묵;강인석
    • 대한기계학회논문집B
    • /
    • 제27권7호
    • /
    • pp.956-962
    • /
    • 2003
  • The Lippmann-Young equation has been widely used in electrowetting to predict the contact-angle change of a droplet on a insulating substrate with respect to the externally-applied electrical voltage. The Lippmann-Young equation is derived by assuming a droplet as a perfect conductor, so that the effect of the electrical double layer and the line tension are not taken into account. The validity of the assumption has never been checked before, systematically. In the present investigation, a modified Lippmann-Young equation is derived taking into account of the effect of the electrical double layer and the line tension. To assess their influence on contact-angle change in electrowetting, the electrostatic field around the three-phase contact line is analyzed by solving the Poisson-Boltzmann equation numerically. The validity of the numerical methods is verified by using the past theoretical results on the electrostatic field around a wedge-shaped geometry, which shows fairly good agreement. The results of the present investigation clearly indicate that the effect of the electrical double layer and the line tension is negligible for a millimeter-sized droplet. On the other hand, for a micron-sized droplet, the effect of the line tension can become a dominating factor which controls the contact-angle change in electrowetting.