• Journal of the Korean Vacuum Society
• /
• v.16 no.2
• /
• pp.79-90
• /
• 2007

Prototype of $800{\ell}$ vacuum web coater (Vic Mama) consisting of ion source with low energy less than 250 eV for high speed surface modification and 4 magnetron sputter cathodes was designed and constructed. Its performance was evaluated through fabricating the adhesiveless flexible copper clad laminate (FCCL). Pumping speed was monitored in both upper noncoating zone pumped down by 2 turbo pumps with 2000 l/sec pumping speed and lower surface modification and sputter zone vacuumed by turbo pumps with 450 1/sec and 1300 1/sec pumping speed respectively. Ion current density, plasma density, and uniformity of ion beam current were measured using Faraday cup and the distribution of magnetic field and erosion efficiency of sputter target were also investigated. With the irradiation of ion beams on polyimide (Kapton-E, $38{\mu}m$) at different fluences, the change of wetting angle of the deionized water to polyimide surface and those of surface chemical bonding were analyzed by wetting anglometer and x-ray photoelectron spectroscopy. After investigating the deposition rate of Ni-Cr tie layer and Cu layer was investigated with the variations of roll speed and input power to sputter cathode. FCCL fabricated by sputter and electrodeposition method and characterized in terms of the peel strength, thermal and chemical stability.

• Korean Journal of Environmental Biology
• /
• v.32 no.4
• /
• pp.319-326
• /
• 2014

Fish community was investigated in eutrophic Jeondae agricultural reservoir from April to November 2012. The food web structure of major fish species of Jeondae reservoir showed that due to serious organic pollution, the hyper-eutrophic condition with high chemical oxygen demand (COD), chlorophyll-a (Chl-a), total nitrogen (TN) and total phosphorus (TP), as estimated by stable isotope analysis. Total of 679 individuals were collected from the reservoir, and 9 species were identified. Interestingly, Lepomis macrochirus and Hemiculter eigenmanni known as less sensitive to pollution and water quality deterioration, dominated the reservoir, and their relative abundances were 38% and 27%, respectively. Further, the analysis of the stomach contents revealed that main food source of dominant L. macrochirus was high amount of zooplankton, which includes copepoda and cladocera, while Cyprinidae species mainly consumed organic particles with zooplankton preys. Stable isotope analysis also suggested that L. macrochirus, Carassiusauratus, Pseudorasboraparva, and H. eigenmanni are major zooplantivorous group in the Jeondae Reservoir.

• Journal of Korean Society on Water Environment
• /
• v.23 no.4
• /
• pp.474-481
• /
• 2007

With population growth, industrialization, and urbanization within the watershed, the hydrologic response changed dramatically, resulting in increases in peak flow with lesser time to peak and total runoff with shortened time of concentration. Infiltration is directly affected by initial soil moisture condition, which is a key element to determine runoff. Influence of the initial soil moisture condition on hydrograph analysis should be evaluated to assess land use change impacts on runoff and non-point source pollution characteristics. The Long-Term Hydrologic Impact Assessment (L-THIA) model has been widely used for the estimation of the direct runoff worldwide. The L-THIA model was applied to the Little Eagle Creek (LEC) watershed and Its estimated direct runoff values were compared with the BFLOW filtered direct runoff values by other researchers. The $R^2$ value Was 0.68 and the Nash-Sutcliffe coefficient value was 0.64. Also, the L-THIA estimates were compared with those separated using optimized $BFI_{max}$ value for the Eckhardt filter. The $R^2$ value and the Nash-Sutcliffe coefficient value were 0.66 and 0.63, respectively. Although these higher statistics could indicate that the L-THIA model is good in estimating the direct runoff reasonably well, the Antecedent Moisture Condition (AMC) was not adjusted in that study, which might be responsible for mismatches in peak flow between the L-THIA estimated and the measured peak values. In this study, the L-THIA model was run with AMC adjustment for direct runoff estimation. The $R^2$ value was 0.80 and the Nash-Sutcliffe coefficient value was 0.78 for the comparison of L-THIA simulated direct runoff with the filtered direct runoff. However there was 42.44% differences in the L-THIA estimated direct runoff and filtered direct runoff. This can be explained in that about 80% of the simulation period is classified as 'AMC I' condition, which caused lower CN values and lower direct runoff estimation. Thus, the coefficients of the equation to adjust CN II to CN I and CN III depending on AMC condition were modified to minimize adjustments impacts on runoff estimation. The $R^2$ and the Nash-Sutcliffe coefficient values increase, 0.80 and 0.80 respectively. The difference in the estimated and filtered direct runoff decreased from 42.44% to 7.99%. The results obtained in this study indicate the AMC needs to be considered for accurate direct runoff estimation using the L-THIA model. Also, more researches are needed for realistic adjustment of the AMC in the L-THIA model.

• Structural Engineering and Mechanics
• /
• v.64 no.5
• /
• pp.621-640
• /
• 2017

This paper reports the numerical investigation conducted to study the influence of Local-Distortional (L-D) interaction mode buckling on post buckling strength erosion in fixed ended lipped channel cold formed steel columns. This investigation comprises of 81 column sections with various geometries and yield stresses that are carefully chosen to cover wide range of strength related parametric ratios like (i) distortional to local critical buckling stress ratio ($0.91{\leq}F_{CRD}/F_{CRL}{\leq}4.05$) (ii) non dimensional local slenderness ratio ($0.88{\leq}{\lambda}_L{\leq}3.54$) (iii) non-dimensional distortional slenderness ratio ($0.68{\leq}{\lambda}_D{\leq}3.23$) and (iv) yield to non-critical buckling stress ratio (0.45 to 10.4). The numerical investigation is carried out by conducting linear and non-linear shell finite element analysis (SFEA) using ABAQUS software. The non-linear SFEA includes both geometry and material non-linearity. The numerical results obtained are deeply analysed to understand the post buckling mechanics, failure modes and ultimate strength that are influenced by L-D interaction with respect to strength related parametric ratios. The ultimate strength data obtained from numerical analysis are compared with (i) the experimental tests data concerning L-D interaction mode buckling reported by other researchers (ii) column strength predicted by Direct Strength Method (DSM) column strength curves for local and distortional buckling specified in AISI S-100 (iii) strength predicted by available DSM based approaches that includes L-D interaction mode failure. The role of flange width to web depth ratio on post buckling strength erosion is reported. Then the paper concludes with merits and limitations of codified DSM and available DSM based approaches on accurate failure strength prediction.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.6
• /
• pp.517-524
• /
• 2017

The objective of this research is to improve the efficiency of data collection from many machine components on smart factory floors using IoT(Internet of things) techniques and cloud platform, and to make it easy to update outdated diagnostic schemes through online deployment methods from cloud resources. The short-term analysis is implemented by a micro-controller, and it includes machine-learning algorithms for inferring snapshot information of the machine components. For long-term analysis, time-series and high-dimension data are used for root cause analysis by combining a cloud platform and multivariate analysis techniques. The diagnostic results are visualized in a web-based display dashboard for an unconstrained user access. The implementation is demonstrated to identify its performance in data acquisition and analysis for rotating machinery.

• Journal of Periodontal and Implant Science
• /
• v.53 no.2
• /
• pp.99-109
• /
• 2023

Purpose: The aim of this systematic review was to evaluate the effectiveness of the socket shield technique (SST), an innovative surgical method introduced in 2010, for reducing buccal bone plate resorption. Methods: The review was conducted following the PRISMA guidelines. Clinical studies conducted in humans and investigating the SST were searched on PubMed (MEDLINE), Embase, Web of Knowledge, and Google Scholar in November and December 2021. The implant survival rate, percentage of complications, and clinical parameters (marginal bone loss [MBL], pink esthetic score [PES], and buccal bone plate resorption [BBPR]) were analyzed using the collected data. Results: The initial search resulted in 132 articles. After article screening, the full texts of 19 studies were read and 17 articles were finally included in the review. In total, 656 implants were installed with the SST. Nine of the 656 implants experienced failure, resulting in an implant survival rate of 98.6%. The percentage of complications was about 3.81%. The analysis of clinical parameters (MBL, PES, and BBPR), showed favorable results for the SST. The mean MBL in implants placed with the SST was 0.39±0.28 mm versus 1.00±0.55 mm in those placed without the SST. PES had a better outcome in the SST group, with an average of 12.08±1.18 versus 10.77±0.74. BBPR had more favorable results in implants placed with the SST (0.32±0.10 mm) than in implants placed with the standard technique (1.05±0.18 mm). Conclusions: The SST could be considered beneficial for preserving the buccal bone plate. However, since only 7 of the included studies were long-term randomized controlled trials comparing the SST with the standard implant placement technique, the conclusions drawn from this systematic review should be interpreted with caution.

• Women's Health Nursing
• /
• v.29 no.2
• /
• pp.91-103
• /
• 2023

Purpose: This study aimed to construct a structural equation model to explain and predict factors affecting the health-related quality of life (QoL) in female rheumatoid arthritis (RA) patients based on the health-related QoL model by Ferrans et al. (2005) and a literature review. Methods: Patients (N=243) who were either registered members of an internet cafe composed of patients with RA or rheumatology outpatients at two tertiary general hospitals in Busan, Korea, were recruited via convenience sampling. Data were collected from July 2 to September 9, 2021, and the survey was conducted using a web-based questionnaire. The data were analyzed by SPSS and AMOS 26.0. Results: The goodness-of-fit statistics of the final model exhibited good results (χ²/degree of freedom=2.68, Turker-Lewis index=.94, comparative fit index=.96, standardized root mean-squared residual=.04, root mean- square error of approximation=.08), and 11 out of 14 paths of the model were supported. The squared multiple correlation, which reflected the explanatory power of the environmental characteristics, symptoms, functional status, and perceived health status on health-related QoL, was 80%. In the hypothesis model, 10 paths had significant direct effects, 6 paths had significant indirect effects, and 12 paths had significant total (direct and indirect) effects. Conclusion: Considering that factors directly affecting the health-related QoL of female patients with RA were social support, symptoms (fatigue and depression), resilience, and perceived health status, and that resilience was the most influential factor, clinicians can encourage resilience. Hence, to improve the health-related QoL of female patients with RA, continuing management is necessary, using various intervention methods that focus on enhancing resilience from the early stage to the end of treatment for RA.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.10
• /
• pp.6388-6398
• /
• 2014

To understand size fractioned chlorophyll a and material cycle characteristics in Jeju marine ranching area (JMRA), 4 times of survey were conducted from April to November 2008. Picoplankton on the surface in JMRA was on average, $0.30{\mu}g/L$(annual mean(M):17.3%) in the $0.03{\sim}0.84{\mu}g/L$ range, accounting for 17.3%. Nannoplankton and picoplankton was on average, $1.35{\mu}g/L$(M:78.0%) in the $0.22{\sim}3.93{\mu}g/L$ range, and $1.73{\mu}g/L$(M:4.7%) in the nd ~ 0.24 range, respectively. The 10m layer was similar to the surface. The measured values changed according to the measurement times but the nanoplankton composition ratio was higher throughout the year. In addition, the size fractioned chlorophyll a distribution in JMRA was similar to that of tropical sea area affected by the Monsoon rather than South Korean offshore coast geographically adjacent to the East China Sea and Japan coastal waters affected by the Kuroshio/Tsushima warm currents. That is, the material cycle of JMRA consists of a microbial food web rather than traditional food chain at a lower trophic levels. Primary production is deemed to have a higher possibility of being adjusted by top-down dynamics, such as micro-zooplankton grazing pressure rather than nutrients supply.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.14
• /
• pp.177-218
• /
• 2000

Global Electronic Trading means that trading partners trade each other via Global Electronic Trading Network, that is, global business to business electronic commerce. Recently, where the cargo arrives ahead of the B/L, the importer cannot take delivery of the cargo without the B/L. This situation is referred to as the B/L dilemma. But the BOLERO system will resolve this B/L dilemma. Bolero Project is developing a cross industry utility platform for the secure, electronic transfer of commercial trade information world wide. After the successful testing of an original pilot project, The Bolero Association was formed in 1995 by a group of interested cross industry companies. As a joint venture between SWIFT and TT Club, bolero.net is changing the way the world trades by providing a web-based, paperless mode of commerce that is designed to become a global standard. Bolero International Limited published the first edition of Bolero Rulebook in 1999. The Bolero Rulebook as amended from time to time, governing the relationship between Users and their rights and obligations arising from the Bolero system. The Bolero service will be governed by a multilateral contract called the Bolero Rule Book which specifies the rights and responsibilities of Bolero and its users. The Title Registry and Bolero Bill of Lading provide a fully functional equivalent to the paper bill of lading. The Bolero Bill of Lading can be created, transferred, amended, and surrendered by way of designating to order party, blank endorsement, refusal by the transferee etc. Thus, this study deals with the functions of Bolero Bill of Lading and the problems and solutions in the Bolero Bill of Lading in point of definitions and operation under the Bolero Rulebook.

• The Journal of the Korean dental association
• /
• v.53 no.7
• /
• pp.476-484
• /
• 2015

Purpose: This study intended to analyze the validity of clinical effectiveness data of clinical trials testing systemic titrated extract of Zea Mays L. unsaponifiable fraction chemotherapeutic agent. Material and Methods: Among 5 clinical trials claimed as proof of clinical effectiveness on the Web site of the manufacturer of this chemotherapeutic agent, a review of 4 clinical trials, written in either Korean or English, was conducted. Data were extracted from studies for the following variables: year of publication, age, sample size, follow-up period, combination with contemporary periodontal treatments, randomization, randomization check, blinded measurement, and statistical test type. Results: The study subjects' age intervals were too diverse to decide a common target population to generalize the findings. No study stated clearly the rationale for the sample size determination. Follow-up period to observe the start of clinical effectiveness was inconsistent and decided without any rationale of pathophysiological latent period. Randomization to make the comparisons on the same start line was performed but failed in a study. Randomization effect was not checked in 4 studies. Performance of blinded measurement of clinical outcomes to prevent bias was unclear in 2 studies. Type of statistical test was inappropriate in 3 studies. Conclusions: Based on the analysis of the validity of data on clinical and demographic variables, the four available clinical trials have not demonstrated compelling evidence of therapeutic effectiveness of systemic titrated extract of Zea Mays L. unsaponifiable fraction chemotherapeutic agent to improve prognosis of periodontal disease either with the contemporary periodontal treatment or without it.