• The Transactions of the Korea Information Processing Society
• /
• v.7 no.11
• /
• pp.3479-3489
• /
• 2000

Most of the study on fairness control method for Distributed-Queue Dual-Bus(DQDB) have been performed under specific load types such as equal probability load types or symmetric load types. On Web-based internet enviroments client-server load types are more practical traffic patlerns than specrfic load types. In this paper, an effiective fairness control method to distribute DQDR network bandwidth fairly to all stations under a client-server load is proposed. In order to implement a dynamic bandwidth timing capabihty needed to distribute the bandwidth fairty at heavy loads, the proposed method uses two pararnetexs, one is an access hrnit to legulate each station's packet transmission and the other is the number of extra emply slots that are yielded to downstream stations. In point of implementation this mechanism is simpler and easier than Bandwidth Tuning Mechanism(BTM) that uses an intermediate pattern and an adptation function. Simulation results show that it outperforms othen mecharusms.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.2
• /
• pp.162-167
• /
• 2009

In this paper, we present a patient real-time vital sign information transmission system to effectively support developing real-time communication service by using a real-time object model named TMO (Time-Triggered Message-Triggered Object). Also, we describes the application environment as the PMS(Patient Monitoing System) to guarantee real-time service message with TMO structure in distributed network systems. We have to design to obtain useful vital sign information, which is generated at parsing data receiver modulor of HIS with TMO structure, that is offered by the central monitor of PMS. Vital sign informations of central monitor is composed of the raw data of several bedsite patient monitors. We are willing to maintain vital sign information of real time and continuity that is generated from the bedsite patient monitor. In the real time simulation techniques based on TMO object modeling, we have observed several advantages to the TMO structuring scheme. TMO object modeling has a strong traceability between requirement specification and design.

• Proceedings of the Technology Innovation Conference
• /
• 2002.02a
• /
• pp.133-149
• /
• 2002

This study aims to investigate the impact of wide use of digital technology, in particular, the Internet, on innovation process and corporate strategy in electronics industry. The introduction of digital technology has changed innovation process, business model and organizational structure of the electronics companies. With the introduction of digital technology, the entire value chain of electronics industry from procurement, sales, and marketing to R&D and manufacturing has been restructured. E-commerce has been a major agenda for e-business. Recently, collaboration among electronics companies through e-marketplace has emerged as an important issue. A web-based e-commerce standard, so called RosettaNet, has been developed for facilitating e-transactions of electronics firms. The development of digital technology has dramatically increased the processing speed and sophisticated the virtual reality technology. As simulation becomes easier and more effective, the uncertainty and risk involved in R&D has decreased significantly. Another positive impact is closer cooperation between R&D and manufacturing functions. Taking advantage of automated and flexible production technology, has a new type of firm, so called, EMS (Electronics Manufacturing Services) emerged, whose strategic focus is on manufacturing only. The EMS can be seen as a kind of innovative organization, that is, a modular organization for production function. Digital technology has made convergence of computer and communication possible at early years but right now the convergence has been accelerated in extensive areas of communication, broadcasting, information appliances, software, contents, and services. Firms' effort for an innovative product and service has been intensified and the competition for a new standard product and service has become severe in electronics industry. Business activities are always realized in a specific organizational context. Accordingly building up innovation-friendly organization has emerged as a critical concern. Due to the striking decrease of transaction cost, a network type of organization has proliferated, and a business function turns into a modular organization. As a whole, digital technology has pushed electronics firms into developing their own business model, which takes consideration of standardization of business platform and their core competency.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.2069-2076
• /
• 2008

In this paper, we develop an electrostatic monitoring system which is composed of an electrostatic prediction system and a warning message transmission system. The electrostatic prediction system in a factory receives the value of electrostatic charge from the electrostatic sensor and predicts the next value by using past data and sends the value to the warning message transmission system through the bluetooth communication. The warning message transmission system gets a warning signal and transmits the warning message to the worker's cellphone through a commercial SMS web by a socket program running on Windows PC in a control room. We propose electrostatic forecasting algorithms based on LSR(least square regression) using weight factors in an electrostatic prediction system. Simulation results show that the algorithm with dynamically variable weight factors is best with 64.69V standard deviation and a warning message transmitted by the warning message transmission system is displayed on cellphone after about 5 seconds.

• Nuclear Engineering and Technology
• /
• v.42 no.4
• /
• pp.339-364
• /
• 2010

Following a joint OECD/NEA-IAEA-sponsored meeting to define the current role and future perspectives of the application of Computational Fluid Dynamics (CFD) to nuclear reactor safety problems, three Writing Groups were created, under the auspices of the NEA working group WGAMA, to produce state-of-the-art reports on different aspects of the subject. The work of the second group, WG2, was to document the existing assessment databases for CFD simulation in the context of Nuclear Reactor Safety (NRS) analysis, to gain a measure of the degree of quality and trust in CFD as a numerical analysis tool, and to take initiatives to extend the existing databases. The group worked over the period of 2003-2007 and produced a final state-of-the-art report. The present paper summarises the material gathered during the study, illustrating the points with a few highlights. A total of 22 safety issues were identified for which the application of CFD was considered to potentially bring real benefits in terms of better understanding and increased safety. A list of the existing databases was drawn up and synthesised, both from the nuclear area and from other parallel, non-nuclear, industrial activities. The gaps in the technology base were also identified and discussed. In order to initiate new ways of bringing experimentalists and numerical analysts together, an international workshop -- CFD4NRS (the first in a series) -- was organised, a new blind benchmark activity was set up based on turbulent mixing in T-junctions, and a Wiki-type web portal was created to offer online access to the material put together by the group giving the reader the opportunity to update and extend the contents to keep the information source topical and dynamic.

• Journal of The Korean Association of Information Education
• /
• v.24 no.6
• /
• pp.597-606
• /
• 2020

Recently, as students' programming classes are being conducted online, interest in factors that can lead to the success of online programming classes is also increasing. Therefore, in this study, online programming classes were conducted for specialized high school students using a web-based simulation programming tool through TinkerCad. In these online programming classes, students' self-regulation ability and learning flow were set as variables that influence both learning engagement and teaching presence, and the predictive power of each was analyzed. As a result, it was found that both self-regulation ability and learning flow were predictive variables for learning engagement and teaching presence, and that learning flow played a mediating role between self-regulation ability, learning engagement, and teaching presence. This study is meaningful in that it suggested that self-regulation ability and learning flow should be considered more meaningfully in online programming classes, and a practical strategy for this is presented.

• Microbiology and Biotechnology Letters
• /
• v.49 no.1
• /
• pp.65-74
• /
• 2021

Serine proteases are the most versatile proteolytic enzymes with tremendous applications in various industrial processes. This study was designed to investigate the biochemical properties, critical residues, and the catalytic potential of alkaline serine protease using in-silico approaches. The primary sequence was analyzed using ProtParam, SignalP, and Phyre2 tools to investigate biochemical properties, signal peptide, and secondary structure, respectively. The three-dimensional structure of the enzyme was modeled using the MODELLER program present in Discovery Studio followed by Molecular Dynamics simulation using GROMACS 5.0.7 package with CHARMM36m force field. The proteolytic potential was measured by performing docking with casein- and keratin-enriched residues, while the effect of the inhibitor was studied using phenylmethylsulfonyl fluoride, (PMSF) applying GOLDv5.2.2. Molecular weight, instability index, aliphatic index, and isoelectric point for serine protease were 39.53 kDa, 27.79, 82.20 and 8.91, respectively. The best model was selected based on the lowest MOLPDF score (1382.82) and DOPE score (-29984.07). The analysis using ProSA-web revealed a Z-score of -9.7, whereas 88.86% of the residues occupied the most favored region in the Ramachandran plot. Ser327, Asp138, Asn261, and Thr326 were found as critical residues involved in ligand binding and execution of biocatalysis. Our findings suggest that bioengineering of these critical residues may enhance the catalytic potential of this enzyme.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5D
• /
• pp.869-876
• /
• 2006

In the case of earthenware cultural heritages that are found in the form of fragments, the major task is quick and precise restoration. The existing method, which follows the rule of trial and error, is not only greatly time consuming but also lacked precision. If this job could be done by three dimensional scanning, matching up pieces could be done with remarkable efficiency. In this study, the original earthenware was modeled through three-dimensional pattern scanning and photogrammetry, and each of the fragments were scanned and modeled. In order to obtain images from the photogrammetry, we calibrated and used a Canon EOS 1DS real size camera. We analyzed the relationship among the sections of the formed model, efficiently compounded them, and analyzed the errors through residual and color error map. Also, we built a web-based three-dimensional simulation environment centering around the users, for the virtual museum.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.3
• /
• pp.64-77
• /
• 2015

An effective method for produce munitions effectiveness data is to calculate weapon effectiveness indices in the US military's Joint Munitions Effectiveness Manuals (JMEM) and take advantage of the damage evaluation model (GFSM) and weapon Effectiveness Evaluation Model (Matrix Evaluator). However, a study about the Range Safety that can be applied in the live firing exercises is very insufficient in the case of ROK military. The Range Safety program is an element of the US Army Safety Program, and is the program responsible for developing policies and guidance to ensure the safe operation of live-fire ranges. The methodology of Weapon Danger Zone (WDZ) program is based on a combination of weapon modeling/simulation data and actual impact data. Also, each WDZ incorporates a probability distribution function which provides the information necessary to perform a quantitative risk assessment to evaluate the relative risk of an identified profile. A study of method to establish for K-Range Safety data is to develop manuals (pamphlet) will be a standard to ensure the effective and safe fire training at the ROK military education and training and environmental conditions. For example, WDZs are generated with the WDZ tool as part of the RMTK (Range Managers Tool Kit) package. The WDZ tool is a Geographic Information System-based application that is available to operational planners and range safety manager of Army and Marine Corps in both desktop and web-based versions. K-Range Safety Program based on US data is reflected in the Korean terrain by operating environments and training doctrine etc, and the range safety data are made. Thus, verification process on modified variables data is required. K-Range Safety rather than being produced by a single program, is an package safety activities and measures through weapon danger zone tool, SRP (The Sustainable Range Program), manuals, doctrine, terrain, climate, military defence M&S, weapon system development/operational test evaluation and analysis to continuously improving range safety zone. Distribution of this K-range safety pamphlet is available to Army users in electronic media only and is intended for the standing army and army reserve. Also publication and distribution to authorized users for marine corps commands are indicated in the table of allowances for publications. Therefore, this study proposes an efficient K-Range Safety Manual producing to calculate the danger zones that can be applied to the ROK military's live fire training by introducing of US Army weapons danger zone program and Range Safety Manual

• Journal of the Korean Association of Geographic Information Studies
• /
• v.10 no.4
• /
• pp.97-110
• /
• 2007

A laser scanning technique has been attracting much attention as a new technology to acquire location information. This technique might be applicable to a wide range of areas, most notably in geomatics, due to its high accuracy of location and automation of high-density data acquisition. A alignment information extraction system on highway has been developed in this study by utilizing the advantages of the laser scanning technique. The system can accurately interpret the alignment information of highway and can be applied to actual works. To develop the alignment information extraction system on highway, an algorithm that can automatically separate a horizontal alignment into a straight line, a transition curve, and a circular curve was developed. It can increase its efficiency compared to the conventional methods. In addition, an algorithm that can automatically extract design elements of horizontal and vertical alignments of highway was developed and applied to an object highway. This yielded higher practicality with more accurate values compared to those from previous studies on the extraction of design elements of highway alignment. Furthermore, the extracted design elements were used to perform a virtual driving simulation on the object highway. Through this, data were provided for a visual judgment for judging visually whether the topography and structures were harmonized in a three-dimensional manner or not. The study also presents data that can serve as a basis to determine highway surface freezing sections and to analyze three-dimensional sight distance models. Through the establishment of a systematic database for diverse data on highway and the development of web-based operating programs, an efficient highway maintenance can be ensured and also they can provide important information to be used when estimating a highway safety in the future.