• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.3
• /
• pp.170-176
• /
• 2012

This paper analyzes the sea state and characteristics during the August 2011 passage of Typhoon Muifa based on data measured at four ocean weather/wave observation stations (buoys) located on the southwestern coast of Korea. When the typhoon arrived in the area approximately 230 km west of Mokpo at 9 PM on August 7, the decrease in air pressure led to increases in sea level of 25.64 cm at the Chilbal-do buoy, 16.43 cm at the Geomun-do buoy, and 9.60 cm at the Geoje-do buoy. The maximum wave height increased at the Geomun-do buoy about seven times faster than at the Chilbal-do buoy. The low water temperature at Chilbaldo during the typhoon passage probably reduced the wave energy. In the face of the oncoming typhoon, the southwest direction of the wind and waves may have been the result of external forces transporting seawater (energy) from the open sea toward the coast. The weather and ocean data from the Mara-do buoy were negatively correlated with those of Chilbal-do, whereas the data from Geomun-do had a positive correlation with those of Geoje-do.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.6 no.2
• /
• pp.268-273
• /
• 2011

Withstanding the continuous treat from the typhoon and nasty weather from ocean, the development of the real time monitoring buoy such as ocean wave related monitoring buoy system becomes essential. In this research, the development of the ocean wave monitoring buoy system had been done domestically. The development including the data real-time monitoring (wind, temperature and pressure) added in the buoy, buoy mooring and real-time data communication system. The developed wave monitoring buoy system (drift type, wave direction and wave height type) is expected to meet the demands.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.8
• /
• pp.1123-1128
• /
• 2008

Marine facilities like buoy, lighthouse are operated with stand alone power supply system. This power system can consist of a stand-alone type power system such as PV(Photovoltaic) system, wave system or hybrid system which is not cooperated with a commercial power system. Generally, PV power system for marine facilities can not supply a sufficient power to buoy, because it is so influenced from weather condition. For solving this problem the hybrid power system with PV and wave is studied on a various area, that is why a hybrid power system is requires to overcome these problems. This paper will describe a generation characteristic of WEC(Wave Energy Converter) for buoy, and an AFS(Anti-Fouling System) influence on WEC.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.311-317
• /
• 2014

Buoy has different motion characteristics depends on the sea weather situations. The motion characteristics has an impact on antenna, solar power generation system and etc. installed within a buoy. Therefore, it is important to analyse motion characteristics for management and analyse the buoy conditions. This paper's Buoy motion monitoring system uses gyro sensor to detect motions of a light buoy, and the measured data transfers to the PC on the shore using signal processing algorithm. The aim of this research is to develop monitoring and management mechanism of a buoy by applying motion monitoring system. In this paper, the operation characteristic of movement monitoring system is verified through experiment. Further, in this paper, it can apply such as real-time visibility into the status of the buoy or many ocean facility's motion estimation of the future.

• Journal of Navigation and Port Research
• /
• v.32 no.5
• /
• pp.327-332
• /
• 2008

This paper analyzed the visual range and arrangement of light buoy on navigation officers as the primary material to establish the standard of optimal arrangement of light buoy on the channel of the domestic trade-port. About $30{\sim}150$ questionnaires by port were distributed according to the scale of trade-ports and then Effective total 356 copies were used in analysis. The distance, $2{\sim}4$mile, occupied the highest percentage 55.0% as the visual range with naked eyes at the daytime in bright weather. At the arrangement way of light buoy the both sides buoy method showed high in the preference 62.1% among the respondents. The preferred interval between sequence buoys was averagely 1.09mile. Also, the preferred number of light buoy was two in the preference 40.6% among them to cognize without binoculars.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.14 no.2
• /
• pp.119-125
• /
• 2008

The aim of this study was to determine the characteristics of wave transformation in the shallow water of the Nakdong River estuary due to variations in air pressure, air temperature, wind speed, and wind direction. We analyzed the correlation between weather factors and wind waves in offshore regions near Geoje Island and the Nakdong River estuary in April and May 2007. The weather and wind wave data were obtained from the automatic ocean observation buoy near Geoje Island operated by the Korean Meteorological Administration (KMA). For the estuary region, the wind wave information was the result of field observations, and weather data were obtained from the Busan Meteorological Station. Field observations of water waves in April and May showed that the maximum wave height decreased by about 2.2 m. M oreover, wave height decreased significantly by about 1.3 m due to the reduction in wave energy caused by the water waves propagating from Geoje buoy to the Nakdong River estuary. We conclude that offshore or wind waves coming into the Nakdong River estuary showed considerable height variation due to the prevailing weather conditions, especially wind speed and direction. In particular, headwinds tended to decrease the wave size in inverse proportion to the wind speed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.7
• /
• pp.1003-1010
• /
• 2013

In this paper, TCP/IP based Machine-to-Machine (M2M) communication uses CDMA/GSM network for data communication. This communication method is widely used by offshore moored buoy for data transmission back to the system server. Due to weather and signal coverage, the TCP/IP M2M communication often experiences transmission failure and causing data losses in the server. Data losses are undesired especially for meteorological and oceanographic analysis. This paper discusses a software approach to minimize M2M data losses by handling transmission failure and re-attempt which meant to transmit the data for recovery. This implementation was tested for its performance on a meteorological buoy placed offshore.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2016.05a
• /
• pp.20-21
• /
• 2016

Aids to Navigation (AtoN) is marine traffic safety facility to facilitate the safe and efficient movement of shipping and enhance the protection of the marine environment by the regulation or guideline of The International Association of Marine Aids to Navigation and Lighthouse Authorities (IALA). By IALA NAVGUIDE, the term "New Danger" is defined as newly discovered hazards not yet shown in nautical documents and includes naturally occurring obstructions such as sandbanks or rocks or man-made dangers such as wrecks. 'New Dangers' should be appropriately marked using Lateral, Cardinal, Isolated Danger marks or by using the Emergency Wreck Marking Buoy. However, the Emergency Wreck Marking Buoy has difficulties with implementation conditions in terms of speed and accuracy to install the buoy. In case of sinking accidents, it is difficult immediately to install the Emergency Wreck Marking Buoy because of weather conditions, marine environments and accident position. This paper studies Auto Releasing New Danger Mark Buoy on the deck which can be automatically to release from the deck of a vessel and float in the water and quickly install the accident position in case of sinking accidents. The buoy will be to reduce the risk of navigation and prevent secondary collisions.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.58 no.2
• /
• pp.141-152
• /
• 2022

As a method to understand the ecological habits around the artificial reef, various reports such as fishing gear survey, diving, sound survey, underwater CCTV and camera, etc. are reported. Among them, the sound survey method is carried out by installing an acoustic system on the ship and can be investigated regardless of the marine environment such as time constraints and turbidity. Such method, however, takes a lot of manpower and time as the ship travels at a constant speed. Investigations around artificial reefs are being conducted in an artificial way, and a lot of time and labor are consumed as such. Maritime buoys have been operated for various purposes such as route signs, weather observation, marine environment monitoring and defense monitoring for navigation safety in the past, but studies on monitoring systems for ecological habits and distribution of fish using marine buoys are remarkably insufficient. Therefore, this study aims to develop a system that allows users to directly monitor fish group detector data by estimating the distribution of fish groups around artificial reefs and using wireless communication at sea. In order to confirm the suitability of the maritime buoy used in this study, it was operated to compare data using LTE-equipped buoys capable of wireless communication and a data logger-type system buoy. Data transmission of buoys capable of LTE communication was carried out in a 10-minute ON, 10-minute OFF method due to the limitation of the power supply capacity, and data of the data logger-type buoy received full data. We compared and analyzed the data received from the two fish detectors. It is expected that real-time monitoring of the wireless buoy detection device using LTE will be possible through future research.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.23
• /
• pp.78-97
• /
• 2007

SPM, which is an abbreviation of Single Point Mooring, also called as SBM(Single Buoy Mooring), is a special buoy besides the quays of the harbor for mooring ships, and is normally a 3m wide cone or cylinder shaped steel drum fixed underwater so it won't move, and is used for mooring cargo-work at outer port by laid-up ships and large crude oil carrier. The work of VLCC SPM mainly is accomplished on the open sea. On the open sea as a result of meteorological condition and the ocean wave influence, When the weather condition is get bed, peremptorily moving to the safety place, because of the gale and the billow, almost happened frequently, the pilot is unable to go on board and the tug is also unable to be used Now because of the bad weather the VLCC SPM moving to the other safety place frequently happened in the ulsan port. the construction of new harbor, it constructed many break water around SPM. So that it is necessary to propose the new standard about how to maneuvering area actually. The standard for handling ranges of the SPM operations was tested and verified by a simulation.. So that it is necessary to propose the new standard about how to maneuvering area actually.