• 소성∙가공
• /
• 제23권6호
• /
• pp.345-350
• /
• 2014

The current study elucidates the effects of cementite spheroidization and pro-eutectoid ferrite on the sliding wear resistance in medium carbon (0.45wt%C) and high carbon (1wt%C) steels. Both steels were initially heat treated to obtain a fully pearlite or ferrite + pearlite microstructure. Spheroidizing heat treatments were performed on both steels to spheroidize the pearlitic cementite. Sliding wear tests were conducted using a pin-on-disk wear tester with the steel specimens as the disk and an alumina ($Al_2O_3$) ball as the pin. The sliding wear tests were carried out at room temperature in air with humidity of $40{\pm}2%$. Adapted sliding distance and applied load was 300m and 100N, respectively. Sliding speed was 0.1m/s and the wear-track radius was 9 mm. Worn surfaces and cross-sections of the wear track were examined using an SEM. Micro Vickers hardness of the wear-track subsurface was measured as a function of depth from the worn surface. Hardness and sliding-wear resistance of both steel decreased with increased spheroidization of the cementite. The decrease was more significant in the fully pearlitic steel (1wt%C steel). The steel with the pro-eutectoid ferrite showed relatively higher wear resistance compared to the spheroidized pearlitic steel.

• 한국추진공학회지
• /
• 제17권5호
• /
• pp.95-100
• /
• 2013

동적 기밀구조에 사용되는 고체윤활재의 선택에 있어 중요 설계 변수들은 기밀성, 내마멸성, 윤활막의 형성 등이 있다. 본 연구에서 그라파이트의 고체유할 특성에 영향을 미치는 영향인자들이 분석되었고 다양한 시험 조건들에 대하여 발생하는 마모거동이 왕복동 마모시험으로부터 얻은 결과들과 비교되었다. 또한 윤활 막들의 생성에 대한 최적조건들이 그라파이트 소재의 특성들을 평가하기 위하여 조사되었다. 마멸입자의 생성, 윤활 막의 생성, 윤활 막의 소멸의 과정을 반복하는 과정이 마모 깊이의 변화와 통하여 마모 메커니즘을 평가하였다. 따라서 그라파이트 씰의 윤활막은 마모된 표면위에 마모 입자들의 응착에 의해 발생한 윤활막이 발생되었고 이는 마모특성에 매우 유용하였다.

• International Journal of Precision Engineering and Manufacturing
• /
• 제7권4호
• /
• pp.47-50
• /
• 2006

SCM415 alloy was implanted with nitrogen ions using plasma source ion implantation (PSII), at a dose range of $1{\times}10^{17}\;to\;6{\times}10^{17}\;N^+cm^{-2}$ Auger electron spectrometry (AES) was used to investigate the depth profile of the implanted layer. Friction and wear tests were carried out on a block-on-ring wear tester. Scanning electron microscopy (SEM) was used to observe the micro-morphology of the worn surface. The results revealed that after being implanted with nitrogen ions, the frictional coefficient of the surface layer decreased, and the wear resistance increased with the nitrogen dose. The tribological mechanism was mainly adhesive, and the adhesive wear tended to become weaker oxidative wear with the increase in the nitrogen dose. The effects were mainly attributed to the formation of a hard nitride precipitate and a supersaturated solid solution of nitrogen in the surface layer.

• 한국산업융합학회 논문집
• /
• 제10권1호
• /
• pp.33-38
• /
• 2007

Door guide rail is the core part which guides window when it moves up and down. But when the method of grease lubrication in the core has been used for a long times, its lubrication performance has been weakened. Therefore the method of the solid lubrication such as teflon(PTFE) coating in the rail has been studied to be increased the performance in these days. In this study the friction wear characteristic the surface with teflon coating of door guide rail for automobile has been researched. In 1, 20 Hz frequency friction wear tests the friction coefficient are below 0.188 and 0.213. In indicate test the wear depth is very slight. Therefore the durability to the friction wear in the surface with teflon coating of door guide rail is good. In addition to, the result of this study can make efficient use to a basic study to develop method of test evaluation to door guide rail surface grade. Especially this study will contribute to improve the quality of automobile parts.

• Tribology and Lubricants
• /
• 제39권2호
• /
• pp.43-48
• /
• 2023

In this study, we investigate the tribological behavior of AISI 304 stainless steel pairs under deionized water and hexagonal boron nitride (h-BN) water dispersion lubrication. The specimen friction and wear properties are evaluated using a reciprocating ball-on-flat tribometer. The coefficient of friction remains nearly constant throughout the test under both lubricant conditions. The wear depth of the specimens under h-BN lubrication is smaller than that under deionized water lubrication, indicating the inhibition behavior of h-BN nanolubricants on direct metal-metal contacts. Optical micrographs and stylus profilometer measurements are performed to evaluate the severity of damage caused by the sliding motion and to determine the wear morphology of the specimens, respectively. The results show that h-BN nanolubricants does not have a significant effect on the friction behavior but demonstrates reduced wear owing to their trapping effect between the sliding interfaces. Moreover, scanning electron microscopy and energy-dispersive X-ray spectroscopy images of the specimens were acquired to confirm the trapping effect of h-BN between the sliding interfaces. The results also suggest that the trapped lubricants can distribute the contact pressure, reducing the wear damage caused by the metal-metal contact at the interface. In conclusion, h-BN nanolubricants have potential as an anti-wear additive for lubrication applications. Further investigation is needed to provide direct evidence of the trapping effect of h-BN nanoparticles between the sliding interfaces. These findings could lead to the development of more efficient and effective lubricants for various industrial applications.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1997년도 추계학술대회 논문집
• /
• pp.59-64
• /
• 1997

This paper investigates the relationship between cutting conditions and Acoustic Emission(AE) signals; AEavg, AErms, AEmode, as the base working to monitor the tool wear with in-process. For this purpose, cutting tests were conducted on a CNC lathe with comprehensive cutting conditions.. It is known that AEavg and AErms are proportionaly increased as the increasing of cutting velocity and depth of cut respectively. It is also known that AEmode among three kinds of AE signals may be applied for in-process monitoring to make the self diagnosis system because of its stability to the variation of cutting condition.

• Tribology and Lubricants
• /
• 제25권6호
• /
• pp.381-386
• /
• 2009

In general, a brake system of axle for heavy duty machine as a wheel excavator makes use of wettype multiple disk brakes. These disk bakes are very important parts of heavy duty machine because they are dvanced in durability and braking power, and can be designed compactly. Thus, we adesigned and made wettype multiple disk brakes of axle for the wheel excavator to be localization of these imported all. In this study, wet multiple disk brakes were made a comparative test with the 3 types materials of friction disk by the SAE No.2 dynamometer. The friction characteristics were measured and analyzed to decide a suitable material as wear depth of friction disk and dynamic and static friction coefficient on temperature of oil and applied pressure.

• 복식문화연구
• /
• 제28권6호
• /
• pp.771-786
• /
• 2020

This study aims to develop a life-friendly, wrap-one-piece style dance sports practice wear considering the physical characteristics of middle-aged, abdominally obese women. These types of practice wear allow people to enjoy exercise easily and to wear these garments as daily wear while meeting the requirements for dance sports wear. The three participants selected for this study were all women with five or more years of dance sports experience and were all average sized on Korea's abdominal obesity scale. In the first phase of the study, practice wear was created in a total of nine styles with three different styles of neckline depths for three different styles of dress skirt lengths. In the second phase of the study, the practice wear was created in 15 styles with five different styles of sleeve lengths for three different styles of waistline heights. After analyzing the design preferences of the participants, the fit preferences of the designs were evaluated and the final appearance was analyzed in order to suggest a pattern. The results of the subjects' first and second preference evaluations showed a preference for a 10 centimeter neckline depth, for high waistlines, and for elbow to wrist-length sleeves. The implementation of this research is expected to be extensive, as its results can be used as basic data for making lifestyle dance sports practice wear that covers the physical insecurities of middle-aged, abdominally obese women and enables them to enjoy their leisure time.

• 소성∙가공
• /
• 제31권3호
• /
• pp.129-135
• /
• 2022

The purpose of this study was to quantitatively evaluate the influence of hardness of tool materials on wear resistance in the sheet metal forming process. Punches used in the wear test were made of STD-11 and K340 tool material, and the tempering temperature was set to 530℃ and 500℃, respectively, to control the hardness of the tool materials. The punches mimic the shape of stamping tool of automotive body component to reflect its plastic deformation, and are designed to concentrate wear on the curvature region of punches. Progressive die and coil sheet were used to save time, cost, and raw sheet materials. By quantitatively measuring the wear depth of the punches, the wear behavior and mechanism of the punches were investigated, and characteristics of hardness and wear resistance according to tool materials and tempering temperatures were evaluated. Testing results indicate that the punch made of K340 tool steel with higher hardness had better wear resistance than that of STD-11 tool steel, and the hardness and wear resistance of tool steel were significantly impacted by the tempering temperature.

• International Journal of Human Ecology
• /
• 제2권1호
• /
• pp.57-75
• /
• 2001

Since the Korean economic crisis in 1997, consumers are selecting goods that are more economical and more reasonably priced. Markets for wealthy people, however, have seldom been influenced by economic conditions. Consequently, 'noble marketing' is a new term that marketers should become acquainted with (Kim, 1998). The continuously expanding 'noble market' that generates high profit for marketers needs to be explored, especially the men's wear market. This study adopted a qualitative method (i.e., in-depth interview) with 16 male consumers each. These men who spent more than 3,600,000 won on apparel goods in 2000 and each man had purchased at least one item-suit, jacket, trousers, or coat-from a list of high-priced brands that were selected by the researcher. Findings imply that material or functional benefit of the high-priced apparel were not a critical determinant for choosing the brand. Rather, a socially well-established image for the brand name, especially in terms of psychological/symbolic appeal, played a more important role. This finding supported previous studies. Therefore, for high-priced men s wear, the role of promotion, including advertising or word of mouth, is critical; the image that advertisers should promote is one that characterizes the clothing, and ultimately the wearers, as dignified, legitimate, traditional, and upper class.