• 제목/요약/키워드: Wear characteristics

검색결과 2,052건 처리시간 0.025초

20세기 스포츠웨어에 표현된 니트디자인 (The Knit Design Expressed in the 20th Century Sports wear)

  • 하승연;이연희;박명자
    • 한국의상디자인학회지
    • /
    • 제6권2호
    • /
    • pp.89-102
    • /
    • 2004
  • Modern society is age of sports just as health and leisure became dominant concern, which has caused the fixation and development to sports wear considered as fashion for everyday dress. This paper focused on the development process and aesthetic characteristics of knit design expressed in the 20th century sports wear. The importance and direction of knit design in modern sports wear is expected. Style, items, fabrics, colors, details and top designers were analyzed in sports wear from the 1910' s to 1990' s. Sports wear can be categorized into two of the active sports wear and spectator sports wear. Since disappearance of division between ordinary wear and sports fashion in the 1970' s, the functional wear of leggings, cycle shorts, exercise clothes, leotard, and leg warmer appeared. Vicennial developments of synthetic fibers and new fabrics have caused the great changes in knit design. Colors were vivid in the 1950' s, metallic in the 1970' s and neon in the 1990' s. Sportive sense was expressed by various details. The dominant knit designers who expressed aesthetic characteristics to sports wear were Coco Chanel, Claire McCardell, Balenciaga, Andre Courrege, Pierre Cardin, Yves Saint-Laurent, Ralph Lauren, Donna Karan, and Giogio Armani.

  • PDF

고 Cr 주철계 육성용접부의 연삭(abrasion)마모 특성에 대한 연구 (Abrasive wear characteristics of high Cr cast iron hardfacing)

  • 이형근
    • Journal of Welding and Joining
    • /
    • 제15권4호
    • /
    • pp.154-165
    • /
    • 1997
  • Abrasive wear characteristics of high Cr white cast iron-based hardfacing were investigated using the rubber wheel abrasion wear test method according with the ASTM G65-85. Mild steel was also tested for comparison with high Cr cast iron hardfacing. Wear experiments, where the applied force, wheel revolution rate and abrasive powder feed rate were selected as test valuables, were planned and analyzed by response surface method to evaluate wear statistically and quantitatively. Weight loss of high Cr cast iron hardfacing was mostly affected by the applied force and wheel revolution rate, and little by the powder feed rate. Weight loss of mild steel was greatly affected by the wheel revolution rate and powder feed rate, and slowly and steadily increased with the applied force. Abrasive wear mechanism of high Cr cast iron and mild steel was discussed in the light of the wear test results.

  • PDF

이온질화 에 있어서 첨가탄소량 이 경도 및 마모특성 에 주는 영향 (The Added Carbon Content Effect on the Hardness And Wear Characteristics in Ion-Nitriding)

  • 김희송
    • 대한기계학회논문집
    • /
    • 제7권1호
    • /
    • pp.19-27
    • /
    • 1983
  • This paper deals with hardness and wear characteristics of ion-nitrided metal, and with ion-nitride processing which is concerned with the effects of added carbon content in gas atmosphere. A small optimal amount of carbon content in gas atmosphere increase compound layer thickness, as well as to increase diffusion layer thickness and hardness, and reduces wear rate when the applied wear load is small. It is found in the analysis that under small applied wear load, the critical depth where voids and cracks may be created and propagated is located at the compound layer, so that the abrasive wear where hardness is an important factor, is created and the existence of compound layer reduces the amount of wear. When the load becomes large, the critical depth is located below nucleation and propagation, is created and the existence of compound layer increase wear rate.

$Al_{2}O_{3}$$TiO_{2}$를 플라즈마 용사한 코팅재의 마모 특성 (Wear Characteristics of $Al_{2}O_{3}\;and\;TiO_{2}$ Coating Materials by Plasma Spray)

  • 김성익;김희곤;김귀식
    • Tribology and Lubricants
    • /
    • 제22권5호
    • /
    • pp.282-289
    • /
    • 2006
  • This paper is to investigate the wear behaviors of two type ceramics, $Al_{2}O_{3}\;and\;TiO_{2}$, by coated plasma thermal spray method under the lubricative environment. The lubricative environments are grease fluids, a general hydraulic fluids, and bearing fluids. The wear testing machine used a pin on disk type. Wear characteristics, which were friction force, friction coefficient and the specific wear rate, according to the lubricative environments were obtained at the four kinds of load and sliding velocity is 0.2 m/sec. After the wear experiments, the wear surfaces of the each test specimen were observed by a scanning electronic microscope.

CAE 증착기술에 의해 TiN이 증착된 보론주철의 마모거동 (Wear Characterisitics of TiN-coated Boron Cast Iron by Arc Evaporation Process)

  • 송건;윤의성;안효석
    • Tribology and Lubricants
    • /
    • 제8권1호
    • /
    • pp.63-69
    • /
    • 1992
  • In order to gain better understanding of wear behaviors of TiN-coated boron cast iron, tests and analyses were conducted with block-on disc type tribometer. TiN layer of thickness $2 \mu m$ and $4 \mu m$, coated by cathodic arc evaporation process, were experimentally investigated with the variation of applied load and sliding speed under dry sliding condition. Wear characteristics were expressed in terms of the three-dimentional wear map as well as the wear rate vs sliding speed and load. Comparisons of wear and friction characteristics between coated cast irons and uncoated cast irns were also made. Wear mechanism of TiN layer was explained in view of surface interaction between the mating surfaces. The thicker coating exhibited higher hardness and adhesion strength. the significance of stresses at the surface and in the subsurface was briefly discussed in relation to the wear behavior.

윤활유의 성질이 마모특성에 미치는 영향(제1보) (The Effect of Tribological Characteristics on Lubricants Properties(The 1st))

  • 오성모;이봉구
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 1997년도 제26회 추계학술대회
    • /
    • pp.86-92
    • /
    • 1997
  • When Lubricants is used under severe running condition, tribological characteristics is very important. I have studied the lubricating oil viscosity, kinds of additives and lubricating oil temperatures were changed. In order to study the effect of oil temperature on the wear of the surface, the temperature of the oil was changed for the same sample. Moreover, the temperatures of three kinds of oils which have very different viscosities at room temperature, were varied while the oil viscosity was unchanged. It was shown from the test results that wear is not greatly affected by the amount of ZnDTP antiwear agent, but E-P additives are less effective against wear than ZnDTP additives. The viscosity of lubricating oil and its tempea-ature greatly affect the wear of the surface. Combining all the wear data with those of the surface strength, it was observed that the higher the load, the lower the scratch of wear, and also in the case of the same running load, the lower the wear, the longer the life of the surface strength.

  • PDF

표면개질을 달리한 자동차 변속기어의 마멸특성 비교 (Comparision of Wear Characteristics of Automobile Transmission Gear on Surface Modification)

  • 류을현;조연상;김영희;박흥식
    • 한국윤활학회:학술대회논문집
    • /
    • 한국윤활학회 2003년도 학술대회지
    • /
    • pp.299-306
    • /
    • 2003
  • The SCM420 used mainly to automobile transmission gear has problems that it costs transmission gear maker much money in carburizing treatment. For this, it needs to alternate the existing material and heat treatment to new gear material and surface modification. For this, friction and wear experiment according to sliding speed and applied load was carried out to evaluate the wear resistance of two transmission gear materials with oxidation nitrocarburising and non-oxidation nitrocarburising NT100, The presumed wear volume was calculated with the image processing for evaluation of wear resistance of two transmission gear materials. The results show that the oxidation nitrocarburising has a distinguished wear resistance than non-oxidation nitrocarburising.

  • PDF

신경회로망에 의한 유압구동 부재의 마찰계수 추정 에 관한 연구 (A Study on Friction Coefficient Prediction of Hydraulic Driving Members by Neural Network)

  • 김동호
    • 한국공작기계학회논문집
    • /
    • 제12권5호
    • /
    • pp.53-58
    • /
    • 2003
  • Wear debris can be collected from the lubricants of operating machinery and its morphology is directly related to the fiction condition of the interacting materials from which the wear particles originated in lubricated machinery. But in order to predict and estimate working conditions, it is need to analyze the shape characteristics of wear debris and to identify. Therefore, if the shape characteristics of wear debris is identified by computer image analysis and the neural network, The four parameter (50% volumetric diameter, aspect, roundness and reflectivity) of wear debris are used as inputs to the network and learned the friction. It is shown that identification results depend on the ranges of these shape parameters learned. The three kinds of the wear debris had a different pattern characteristic and recognized the friction condition and materials very well by neural network. We resented how the neural network recognize wear debris on driving condition.

재래형 콤포짓트 레진의 마찰 . 마멸거동 (Friction and Wear Behaviors of Conventional Composite Resins)

  • 임정일;서세광;김교한;김석삼
    • Tribology and Lubricants
    • /
    • 제16권3호
    • /
    • pp.166-172
    • /
    • 2000
  • The friction and wear characteristics of dental composite resins such as Charisma, Elitefil, TPH and Veridonfil were investigated. Furthermore, The surface characteristics examination, the analysis of contents of filler, Victors hardness and fracture toughness measurement of composite resins were preformed. The wear test applied ball to move reciprocationally on flat wear tester at room temperature. Microstructure of surfaces and worn surfaces were observed by SEM. Experimental results indicate that the friction coefficient of TPH was quite low, and the wear resistance of TPH was better than that of Charisma, Elitefil or Veridonfil at the same condition. The main wear mechanism was found to be plastic flow and abrasive wear by failure of filler's bond to the matrix.

인산화 전분 ER 유체의 트라이볼로지 특성 (Tribological Characteristics of Phosphorated Starch Based Electrorheological Fluid)

  • 장민규;이철희;최재영;손정우;최승복
    • Tribology and Lubricants
    • /
    • 제26권1호
    • /
    • pp.7-13
    • /
    • 2010
  • This experimental study presents tribological characteristics under boundary lubrication contacts associated with electrorheolocal (ER) fluid. ER fluid is prepared by using phosphorated starch particles and silicone oil. Experimental apparatus of tribological tester is designed and constructed to evaluate tribological characteristics of pin specimens. Wear tests under boundary lubrication of ER fluid are experimentally performed under consideration of several operational factors such as normal load, sliding distance, sliding speed and specimen materials: steel, copper and aluminum. After wear test, microscopic surface changes of the worn pin specimens are analyzed in order to investigate measured wear characteristics by using the scanning electron microscope (SEM) as well as surface profilometer. In addition, the chemical wear characteristics are investigated by using energy dispersive x-ray spectroscopy (EDS). Moreover, friction coefficient measurements under different materials of pin specimens are conducted for the tribological investigations. In order to verify the effect of starch phosphate particles in ER fluid, the wear test results with ER fluid are compared with test results with only silicone oil. The results clearly present that the phosphorated starch based ER fluid shows the stabilized wear as well as friction characteristics after run-in operations, but the wear rate under ER fluid is increased.