• The Research Journal of the Costume Culture
• /
• v.31 no.6
• /
• pp.793-805
• /
• 2023

This study analyzes the body shapes of lower-body obese female adolescents and proposes a slacks pattern suitable for their body type. Lower-body obesity is a prevalent type of teenage obesity, and our proposals aim to improve consumer satisfaction in ready-to-wear clothes across this demographic. We first observe characteristics of obese lower bodies, noting significantly above-average thigh and hip circumference. These figures indicate a high degree of curvature in obese lower bodies, along with a large drop value. Leveraging this data, we develop a novel slacks pattern using 3D avatars in a virtual simulation system. The formulas for the main areas of the pattern are as follows: front waist girth W/4+0.75cm+0.5cm, back waist girth W/4+0.5cm-0.5cm, front hip girth H/4+1.25cm-0.5cm, back hip girth H/4+2cm+0.5cm, front crotch extension H/16+0.5cm, back crotch extension H/8+1cm. Results from appearance evaluations show that this pattern minimizes strain rate on the waist and hips, and its average score is significantly higher than that of an alternative pattern that was also evaluated. The minimized strain rate and high average score indicate that our pattern assigns a sufficient amount of space to the appropriate areas. Based on these results, we expect our research to inform slacks pattern development and production for obese consumers of all types.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.5
• /
• pp.915-923
• /
• 2023

As environmental regulations on carbon emissions are strengthened worldwide, the existing internal combustion engine-centered automobile industry is being reformed. In particular, large buses and large cargo trucks are pointed out as one of the main causes of environmental destruction due to excessive carbon emissions. The E-Highway power collection system, which has recently been proposed as a solution, uses the vehicle's battery as a backup power source or regenerative braking, depending on whether the pan head of the pentograph installed in the vehicle is in contact with the overhead line. It is used to store the excess energy generated. However, wear through contact due to continuous contact reduces the current collection effect and causes failure. In this paper, by using the current difference, the horizontal position information of the panhead in contact with the overhead line is acquired, thereby reducing the abrasion of the conductor and the panhead Make it possible to follow the overhead line. The position estimation method proposed in this paper simply configures a device that can detect the position of the overhead line of the pantograph by the difference in resistance. It is economical and has the advantage of reducing the volume. The characteristics of the pantograph estimating the location of overhead lines were analyzed using the difference between the two currents of the current collector, the feasibility of the positioning estimation system was verified through simulations and experiments.

• Journal of the Korean Society of Industry Convergence
• /
• v.26 no.6_2
• /
• pp.1019-1024
• /
• 2023

Ceramic materials have excellent material properties such as stability at high temperatures, chemical stability, corrosion resistance, and wear resistance, so they are applicable even in extreme environments of high temperature and pressure. In particular, silicon carbide can be applied in the field of structural ceramics due to its characteristics of high strength, hardness, corrosion resistance, and heat resistance even at high temperatures. In this study, considering the application of silicon carbide materials to next-generation turbines, silicon carbide materials were manufactured using a liquid phase sintering method. When manufacturing liquid phase sintered silicon carbide, sintering additives were added to lower the sintering temperature and densify the material. In Al₂O₃-SiO₂, it was confirmed that the secondary product of the sintering additive was observed as a slightly dark area and was evenly distributed overall, and the fracture surface of Al₂O₃-SiO₂ was in the form of transgranular fracture in which cracks progressed along the crystal plane, and the flexural strength for Al₂O₃-SiO₂ was about 445.6 MPa.

• International Journal of Advanced Culture Technology
• /
• v.12 no.1
• /
• pp.43-50
• /
• 2024

Patients with acute respiratory diseases, such as Middle East Respiratory Syndrome (MERS) due to COVID-19, must wear masks, protective clothing, face shields, and gloves to prevent infection during treatment and performance. Even if it is applied to disabled people, families who protect them are severely mentally tired from severe physical fatigue and stress from exposure to high-risk infectious diseases. As such, the spread of infectious diseases such as respiratory diseases has not only caused difficulties in using existing welfare and medical services but also caused various problems throughout the daily life of disabled people due to the prolonged infectious disease, and its scope is gradually expanding. Therefore, it should not be overlooked that disabled people may experience various difficulties, from the spread of infectious diseases such as respiratory diseases to isolation, diagnosis, and treatment, and it is time to actively assess the life changes felt by families caring for disabled people and consider and research to provide adequate services. According to the survey of disabled people is being conducted in the context of the spread of infectious diseases such as respiratory diseases, while research on the spread of infectious diseases such as respiratory diseases is rare for parents with disabilities. There is a need for additional investigation into the characteristics in other areas of everyday life, including the health field, which is deteriorating through prior research. Therefore, through this survey, the purpose of this study is to investigate the life changes of parents with disabilities in the context of the spread of infectious diseases such as respiratory diseases and to compare and analyze them to find out how parents were affected by each type of disability. It will be used as evidence to identify more necessary needs and problems for parents with disabilities in the spread of infectious diseases such as respiratory diseases and to provide more appropriate health care and welfare services in the future.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.4
• /
• pp.985-994
• /
• 2018

Bio-heavy oil for power generation is a product made by mixing animal fat, vegetable oil and fatty acid methyl ester or its residues and is being used as steam heavy fuel(B-C) for power generation in Korea. However, if the fuel supply system of the fuel pump, the flow pump, the injector, etc., which is transferred to the boiler of the generator due to the composition of the raw material of the bio-heavy oi, causes abrasive wear, it can cause serious damage. Therefore, this study evaluates the fuel characteristics and lubricity properties of various raw materials of bio-heavy oil for power generation, and suggests fuel composition of biofuel for power generation to reduce frictional wear of generator. The average value of lubricity (HFRR abrasion) for bio-heavy oil feedstocks for power generation is $137{\mu}m$, and it varies from $60{\mu}m$ to $214{\mu}m$ depending on the raw materials. The order of lubricity is Oleo pitch> BD pitch> CNSL> Animal fat> RBDPO> PAO> Dark oil> Food waste oil. The average lubricity for the five bio-heavy oil samples is $151{\mu}m$ and the distribution is $101{\mu}m$ to $185{\mu}m$. The order of lubricity is Fuel 1> Fuel 3> Fuel 4> Fuel 2> Fuel 5. Bio-heavy oil samples (average $151{\mu}m$) show lower lubricity than heavy oil C ($128{\mu}m$). It is believed that bio-heavy oil for power generation is composed of fatty acid material, which is lower in paraffin and aromatics content than heavy oil(B-C) and has a low viscosity and high acid value, resulting in inhibition of the formation of lubricating film by acidic component. Therefore, in order to reduce friction and abrasion, it is expected to increase the lubrication of fuel when it contains more than 60% Oleo pitch and BD pitch as raw materials of bio-heavy oil for power generation.

• Journal of the Korean Society of Costume
• /
• v.58 no.3
• /
• pp.63-78
• /
• 2008

Since 1960, minimalism has been one of the fashion phenomenon and turned out in many different ways. After postmodernism which contains negotiation and pluralism, appeared in 1980, there was a new wave of post minimalism that inherited 1960's minimalism. Minimal style which come out of 60's fashion, is marked by simplicity, minimal expression, and monochrome color, and it shows up simple style with no decoration. It opened up a young fashion period, and we saw minimal style in sports wear which utilized simplicity and function with spread of sports in the 70's. And also since 1980, Post-Modern widely influenced the idea about modern culture as well as complicated clothes getting rid of fixed concept, seeking to break the boundary between culture and life which were seek in fashion and personality as well as various characteristic, Accordingly in different ages, The style and image were borrowed from different culture and natural environment mixing the image, cultural phenomena like these appearing in complexity and expression, variety and possibility of new vision was expanded. Since 1980, Fashion has become more gradually diversity, high classed, required of each individuality. The phenomenon of fashion reappearance which was influenced by minimalism is continued to 2000. The Oriental style fashion is still attracted, so The new term "Ethic Minimalism" has appeared along with the trends which is put together. Therefore the purpose of this study is to search the concept and the characteristics of ethnic minimalism, to consider the relationship between minimalism and ethnic minimalism, and reveal the characteristic of ethnic minimalism happened to modern fashion. The study method went through literature research and practice research. The range of this study is oriental fashion spanning of from 1960 to current day. Photo records from this period show well the spirit of the oriental and the personality of minimalism. The oriental representative designer and western representative designer are centered Consequently, The formative characteristics of ethnic minimalism are simple, pure, unbalanced free style and representing the phenomena of compromise, blending oriental and western fashion. Structually, Elements of space and plane are emphasized, colors are restricted, and materials are composed mainly of natural fiber. So, minimalism based on simplicity combined with a structure of oriental spiritual depth and space, It could be called ethnic minimalism as a rational fashion.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.6
• /
• pp.225-229
• /
• 2011

Most of the silicon cutting methods using the multi-wire with the slurry injection have been used for wafers of the crystalline solar cell. But the productivity of slurry injection cutting type falls due to low cutting speeds. Also, the direct contact with the metal wire and silicon block increases the concentration of metallic impurities in the wafer's surface. In addition, the abrasive silicon carbide (SiC) generates pollutants. And production costs are rising because it does not re-use the worn wire. On the other hand, the productivity of the cutting method using the diamond coated wire is about 2 times faster than the slurry injection cutting type. Also, the continuous cutting using the used wire of low wear is possible. And this is a big advantage for reduced production costs. Therefore, the cutting method of the diamond coated wire is more efficient than the slurry injection cutting technique. In this study, each cutting type is analyzed using the surface characteristics of the solar wafer and will describe the effects of the manufacturing process of the solar cell. Finally, we will suggest improvement methods of the solar cell process for using the diamond cutting type wafer.

• Journal of Environmental Health Sciences
• /
• v.42 no.6
• /
• pp.430-437
• /
• 2016

Objectives: The new Chemical Control Act from the Korean Ministry of Environment (2014-259) simply states only in basic phrases that every worker handling the listed chemicals should wear personal protective equipment (PPE) and does not consider the different hazard characteristics of particular chemicals or work types. The purpose of this study was to produce an exposure risk matrix and assign PPE to the categories of this matrix, which would be useful for revising the act to suggest PPE to suit work types or situations. Methods: An exposure risk matrix was made using hazard ranks of chemicals and workplace exposure risks in the previous study. For the 20 categories of exposure risk matrix PPE, levels A, B, C, D as classified by OSHA/EPA were assigned. After 69 hazardous chemicals were divided into 11 groups according to their physiochemical characteristics, respirators, chemical protective clothing (CPC), gloves and footwear were suggested on the basis of the assigned PPE levels. Results: PPE table sheets for the 11 groups were made on the basis of work types or situations. Full facepiece or half-mask for level C was recommended in accordance with the exposure risk matrix. Level A was, in particular, recommended for loading or unloading work. Level A PPE should be worn in an emergency involving hydrogen fluoride because of the number of recent related accidents in Korea. Conclusion: PPE assignment according to the exposure risk matrix made by chemical hazards and work type or situation was suggested for the first time. Each type of PPE was recommended for the grouped chemicals. The research will be usefully used for the revision of the Chemical Control Act in Korea.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.5
• /
• pp.20-28
• /
• 2014

The high velocity oxygen fuel spraying (HVOF) is a kind of surface modification process technology to form the sprayed coating layer after spraying the powder to molten or semi-molten state by the ultra-high speed at the high-temperature heat source and conflicting with a substrate. It is desirable to melt completely the thermal spray powder in order to produce the coating layer with an optimal adhesion, however, because a semi-molten powder in a spray process has the low efficiency and become a factor that degrades the mechanical property by the inducement of pore-forming within the coating layer. To improve the wear resistance, corrosion resistance and heat resistance, in this study, the plungers of high-speed and ultra-high pressure reciprocating hydraulic pumps for oil and water used in ironwork are produced with $420J_2$ and the coating layers of plungers are formed by the powders of WC-Co-Cr and WC-Cr-Ni including the high hardness WC. The surface of these plungers is modified by the super-mirror face grinding machine using variable air pressure developed in this laboratory, and then the characteristics of cross-sectional microstructure, and surface roughness and hardness values between no operation and 100 days-operation are examined and made a comparison. The fine tops and bottoms on surface roughness curve of oil-hydraulic pump plunger sprayed by WC-Cr-Ni are molded more and higher than those of water-hydraulic pump sprayed by WC-Co-Cr because the plunger diameter of oil-hydraulic pump is 0.4 times smaller than that of water-hydraulic pump and the pressure of oil-hydraulic pump exerted on the plunger is operated with the 70 bars higher than that of water-hydraulic pump. As a result, it is found that the values of centerline average surface roughness and maximum height for oil-hydraulic pump plunger are bigger than those of water-hydraulic pump plunger.

• Journal of Fashion Business
• /
• v.7 no.2
• /
• pp.122-142
• /
• 2003

This study examines the meaning of retro phenomenon and its background of establishment that showed in the pop culture. And it finds out the retro phenomena in the domestic fashion trends. And it defines the characteristics of dress and its ornament in the retro phenomena that have shown in the Korean movies since 1998. By doing this, it examines the relationship between movie dress and street fashion while it compares the styles in the 50s 70s with the retro fashion that is currently emerging. The results of the study are as follows. First, the hippie look in the 60s represented a distinctive characteristic of how they rejected traditional lifestyles. Hippie's romantic femininity that showed in the movie of 'Oollala Sisters' received a spotlight as a necessary style in the modern fashion trend. Second, while the funk look in the 70s was a style of disorder and disgust, the movie gives it a possibility of fashion with a converted sense as a vanguard fashion while embracing the funk look. Third, the layered look in the 70s was expressed with layered items, while the current layered look emphasizes layered textiles as shown in the movie of 'Hae-Jeok Became The Disco King'. Fourth, the feminine look which was a symbol of restraint shows a mixed style with delicate feminine items as shown in the movies, 'The Harmonium In My Memory' and 'Ditto'. Fifth, the training look that has two stripes as shown in the movie 'the Friends' is considered as casual wear, which is functional and easy to move at the end of the 20th century. Finally, the romantic images of school look, as shown in the movies 'the Friends' and 'Hae-Jeok Became The Disco King', show a renewed mixed & unique style. This study has its significance in the sense that it verifies the fact that the movie dress does not show the characteristics of the works that momentarily passes the screen, but it becomes a foundation of the future fashion design. At this time that Korean movies are highly developing, a through study on the movie fashion will not only give a direction of future in the modern fashion, but it will also give a developing momentum in the Korean movie dress.