• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2004년도 학술대회지
• /
• pp.31-36
• /
• 2004

In this paper, fretting wear tests were conducted in air at room temperature (RT) and in water at high temperature and high pressure (HTHP) environment to analyze the wear characteristic. As for the supporting condition between the tube and spring/dimple, the gap of 0.2 mm in air at RT and the normal force of 10 N and the slip of $50\;{\mu}\;m$ in water at HTHP were applied. Four different shapes of spring/dimple specimen (type A, B, C, D) were used. Detail eaxamination of wear scar was also performed using SEM micrographs. As a result, in the case of the spring of truncated wedge, severer wear occurs than the others. Protrusion part was found and larger in air at RT. It is thought that the difference in the wear volume and the protrusion is caused by the different wear mechanism corresponding to the different environment.

• 대한금속재료학회지
• /
• 제48권11호
• /
• pp.1003-1008
• /
• 2010

In this study, the effect of the reinforcement on the wear behaviour and mechanical properties of hypereutectic Al-Si alloys was investigated. The Gas atomized hypereutectic Al-20Si alloy powders were mixed with 1, 3, and 5 wt.% AlN and TiC ceramic particles and consolidated by hotpress. The Al-20Si powder has both finely dispersed primary Si phases and eutectic structures. The Al-20Si-AlN, TiC composites showed that the reinforcements were distributed along the boundary of the Al-20Si alloy. The UTS increased with increasing the AlN, TiC contents. At a lower load, with an increasing weight fraction of reinforcements, the wear rate decreased in both composites and the wear mechanism was adhesive wear. At a higher load, the shape of the debris changes the mechanism of the AlN composites to abrasive-adhesion wear and this resulted in an increase of the wear rate.

• 한국의류학회지
• /
• 제26권5호
• /
• pp.654-662
• /
• 2002

The aim of this paper was to identify high school girls'satisfaction toward Korean traditional style school uniform and their clothing behaviour. The questionnaires were administered to 133 high school girl students in Pusan. To find out attitudes of Korean traditional style school uniform and their clothing behaviour, PC model, mineigen and Varimax Rotation of factor analysis were adopted. The results have shown that each four factors are identified in Korean traditional style school uniform's satisfaction and their clothing behaviour. Multiple Regression analysis has been used to investigate the relationship between these factors of attitudes and satisfaction toward Korean traditional style oriented school uniform. As a result, the relationship between factors of their school uniform behaviour and satisfaction of their school uniform has revealed. They tend to wear their school uniform in various occasions if their satisfaction becomes greater. Besides, the more students have recognized the uniform as symbol of status the more they become satisfied with their school uniform. The relationship between factors of clothing attitudes and satisfaction of school uniform has shown that its uniform doesn't promote students conformity since they might be aware of different style and design of their school uniform compared to other school uniforms.

• Tribology and Lubricants
• /
• 제11권5호
• /
• pp.184-189
• /
• 1995

The antiwear performance of dialkyl 3, 5-di-t-butyl 4-hydroxy benzyl phosphonates was investigated using a four ball wear test machine. Diethyl 3, 5-di-t-butyl 4-hydroxy benzyl phosphonate (DEP) and dibutyl 3,5-di-t-butyl 4-hydroxy benzyl phosponate (DBP) among them showed excellent antiwear performances compared with conventional additives, ZDDP and TCP as the bulk oil temperature and the sliding velocity increased. The surface analysis through an optical microscopy was conducted for tribological studies.

• KSTLE International Journal
• /
• 제1권1호
• /
• pp.12-20
• /
• 2000

Nano-wear and friction of carbon overcoated laser-textured and mechanically-textured computer hard disk were characterised after contact start/stop (CSS) wear test. Various analytical and mechanical testing techniques were employed to study the changes in topography, roughness, chemical elements, mechanical properties and friction characteristics of the coating arising from the contact start/stop wear test These techniques include: the atomic force microscopy (AFM), the continuous nano-indentation test, the nano-scratch test, the time-of-flight secondary ion mass spectroscopy (TOF-SIMS) and the auger electron spectroscopy (AES). It was shown that the surface roughness of the laser-textured (LT) bump and mechanically textured (MT) Bone was reduced approximately am and 7nm, respectively, after the CSS wear test. The elastic modulus and hardness values increased after the CSS test, indicating straining hardening of the top coating layer, A critical load was also identified fer adhesion failure between the magnetic layer and the Ni-P layer, The TOF-SIMS analysis also revealed some reduction in the intensity of C and $C_2$$F_59$, confirming the wear of lubricant elements on the coating surface.

• 한국정밀공학회지
• /
• 제16권5호통권98호
• /
• pp.145-150
• /
• 1999

We have studied on the tribological characteristics of surface modification by Arc Ion Implantation(AIP) coating method. Coating materials were deposited by the Titanium carbide(TiC) and Titanium nitride(TiN). An experimental process was established to determine the tribological characteristics of friction and wear behaviour with the variation of applied load, temperature and the time by the Falex friction and wear test machine. The results, It can be improved that when the surface modification of hard coatings(TiC, TiN) was deposited steel, the tribological characteristics become better. It is argued that improved because of excellence of the anti-wear, the extreme pressure properties and the heat stability.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1132-1133
• /
• 2006

Metal-bonded diamond impregnated tools are being increasingly used in the processing of stone and ceramics, road repair, petroleum exploration, etc. Although the main tool wear mechanisms have been identified, the scientific background is inadequate and fundamental research has to be carried out to better understand the tool field behaviour. This work addresses the complex issues of modelling abrasive wear of the metallic matrix under laboratory conditions. The generated data indicates that the matrix wear resistance can be assessed in a simple manner; whereas tests carried out on diamond impregnated specimens may aid prediction of the tool life in abrasive applications.

• Journal of Mechanical Science and Technology
• /
• 제20권6호
• /
• pp.738-747
• /
• 2006

The friction behaviour of Si-wafer, diamond-like carbon (DLC) and two self-assembled monolayers (SAMs) namely dimethyldichlorosilane (DMDC) and diphenyl-dichlorosilane (DPDC) coated on Si-wafer was studied under loading conditions in milli-newton (mN) range. Experiments were performed using a ball-on-flat type reciprocating micro-tribo tester. Glass balls with various radii 0.25 mm, 0.5 mm and 1 mm were used. The applied normal load was in the range of 1.5 mN to 4.8 mN. Results showed that the friction increased with the applied normal load in the case of all the test materials. It was also observed that friction was affected by the ball size. Friction increased with the increase in the ball size in the case of Si-wafer. The SAMs also showed a similar trend, but had lower values of friction than those of Si-wafer In-terestingly, for DLC it was observed that friction decreased with the increase in the ball size. This distinct difference in the behavior of friction in DLC was attributed to the difference in the operating mechanism. It was observed that Si-wafer and DLC exhibited wear, whereas wear was absent in the SAMs. Observations showed that solid-solid adhesion was dominant in Si-wafer, while plowing in DLC. The wear in these two materials significantly Influenced their friction. In the case of SAMs their friction behaviour was largely influenced by the nature of their molecular chains.

• 한국추진공학회지
• /
• 제17권5호
• /
• pp.95-100
• /
• 2013

동적 기밀구조에 사용되는 고체윤활재의 선택에 있어 중요 설계 변수들은 기밀성, 내마멸성, 윤활막의 형성 등이 있다. 본 연구에서 그라파이트의 고체유할 특성에 영향을 미치는 영향인자들이 분석되었고 다양한 시험 조건들에 대하여 발생하는 마모거동이 왕복동 마모시험으로부터 얻은 결과들과 비교되었다. 또한 윤활 막들의 생성에 대한 최적조건들이 그라파이트 소재의 특성들을 평가하기 위하여 조사되었다. 마멸입자의 생성, 윤활 막의 생성, 윤활 막의 소멸의 과정을 반복하는 과정이 마모 깊이의 변화와 통하여 마모 메커니즘을 평가하였다. 따라서 그라파이트 씰의 윤활막은 마모된 표면위에 마모 입자들의 응착에 의해 발생한 윤활막이 발생되었고 이는 마모특성에 매우 유용하였다.

• 한국산학기술학회논문지
• /
• 제8권3호
• /
• pp.432-436
• /
• 2007

자동차 구조용 재료에 대하여 물리적 증착 코팅방법에 의한 트라이볼로지 특성을 연구 하였다. 코팅 재료는 탄화티탄(TiC)과 질화티탄(TiN)이다. 실험은 펠렉스 마찰 마모시험기를 이용하여 하중과 온도에 다양한 조건을 적용하여 마찰과 마모 거동에 대하여 트라이볼로지 특성을 결정하고 평가하였다. 연구결과 코팅하지 않았을 때보다 코팅하였을 때가 윤활 특성이 향상 되었고, 특히 내마모성 및 극압성 그리고 열 안정성이 훌륭하였다.