• 제목/요약/키워드: Wear area

검색결과 541건 처리시간 0.03초

이동형 치과 X선 발생장치 사용실태와 위험지각 (Perception of Risk and Using Status of Hand-Held Dental X-Ray Unit)

  • 한경순
    • 치위생과학회지
    • /
    • 제14권4호
    • /
    • pp.442-447
    • /
    • 2014
  • 본 연구는 치과위생사의 이동형 X선 발생장치 관련 업무 특성과 위험지각 수준을 분석하기 위하여 2014년 7월 7일부터 31일까지 이동형 치과 X선 발생장치를 이용하여 촬영을 시행하는 수도권 지역 치과병의원 치과위생사를 대상으로 설문조사를 실시하여 다음과 같은 결과를 얻었다. 이동형 X선 촬영기만 보유한 치과병의원은 25.2%로 이동형 X선 발생장치 1일 10회 이상 촬영이 42.4%였으며, 75.2%는 이동이 어려운 환자, 24.8%는 모든 환자에게 적용하였고, 납 방어복은 환자의 62.6%, 술자의 81.3%가 전혀 착용하지 않았으며, 방사선 안전관리교육 경험률은 59.5%였다. 대상자의 평균 위험자각수준은 3.08점이었다. 위험자각수준은 업무경력 5년 이상 군에 비해 3~4년 미만 군은 66%, 2년 미만 군은 61% 낮았고, 방사선 촬영횟수 5회 미만군은 10회 이상 군보다 72% 낮았으며, 이동형 X선 발생장치만 보유한 군이 고정형 촬영기를 함께 보유한 군보다 3.08배 높은 위험자각수준을 나타냈다. 방사선 업무가 지속될수록 누적선량이 높아지게 되므로 방사선 노출을 최소화하고, 합리적으로 방어하는 노력이 절대적으로 필요할 것으로 생각된다.

Monolithic zirconia framework으로 제작된 fixed detachable prostheses를 이용한 심미적인 임플란트 전악 수복 증례 (Esthetic Full Zirconia Fixed Detachable Implant-Retained Restorations Manufactured from Monolithic Zirconia : Clinical Report)

  • 홍준태;최유성;한세진;조인호
    • 구강회복응용과학지
    • /
    • 제28권3호
    • /
    • pp.253-268
    • /
    • 2012
  • 수직적, 수평적 골흡수가 심한 환자에서 임플란트를 이용한 전악수복의 경우 경조직과 연조직 이식을 통해서 임플란트를 원하는 위치에 식립할 수도 있지만, 치은과 치아의 기능과 심미를 회복할 수 있는 fixed detachable prostheses를 대체 술식으로 사용할 수도 있다. 이러한 증례에서 다양한 재료가 수복물의 제작에 사용 가능하지만, metal/acrylic 보철물에서는 레진치아의 파절 및 탈락이 일어날 수 있고, metal/ceramic 혹은 zirconia/ceramic 보철물에서는 도재의 chipping이나 파절과 같은 문제가 발생할 수 있다. 이에 최근에 심미적이면서도 기능적인 보철수복을 위해 zirconia에 도재를 축성하지 않고 임상적으로 적용가능한 monolithic zirconia framework이 출시되어 사용되고 있다. 본 임상 증례는 심미적인 요구도가 높은 완전 무치악 환자에서 임플란트를 식립하고 chipping이나 파절의 위험을 감소시키기 위해 monolithic zirconia framework을 이용해 만들어진 complete fixed detachable 보철물을 이용한 수복에 대해 보고하고자 한다. 이번 증례에서 보철물은 심미적, 기능적으로 만족스러웠으며, 2년 간의 정기검사에서 임상적인 합병증은 보고되지 않았다.

"홍루몽"에 나타난 청대복식 연구 (A Study on the Costume of Ch'ing Dynasty in "Dream of the Read Chamber")

  • 나해연;전혜숙
    • 복식
    • /
    • 제24권
    • /
    • pp.59-82
    • /
    • 1995
  • All kinds of art are the creatures of the daly and reflect the society and the life of the day in literary works. So, in which literary works, we can find the styles of those who lived in the specified days. And the styles of its character's costume are expressed with the day'mood and cultural backgrounds. In this study, we studied on the general meaning, which was shown in the Costume of early Ch'ing Dynasty that was forming the Costume of dress through dividing into the underwear and the outer garment in $\ulcorner$Dream of the read Chamber$\lrcorner$. During the Ch'ing Dynasty, according to the rule : Men followed it but women not" , they held on to the costume of them (both the Man and the Han) with a high pressure and a conciliatory policy. As a result, I have known that there is the Soojean clothe(수전의), which is the late Myung Dynasty's one and their is also Skirt (군), which held on the Costume of the Myung's. Hence in the Ch'ing , there are a lot of difference in the Costume , the economy and the politic because the ruler was not the han but the Ch'ing. Those characters are as follows. first, on the side of the style , it is occured in the coat and the over jacket of the round neckline. The style of the sleeves are also the tightly(고착). Second, on the side o f the material, the use of the furs are found. It seems that are influence of the north area. Third, it is involved not the traditional Costume of the Han, but the over jacket(which is waistlength), These characters had taken root into the Costume of the Ch'ing Dynasty. In case of the jacket, which are found in the novel most frequently , it was represented by the tight jacket (소오), the long jacket (대오), the short jacket(단오) and the Sam (삼). The skirt was used by women only. the Slacks were trousers only for men, so it was not foujnd in the women's wear. In the vest, the over jacket and coat, which are for putting on, its material, insiqnia and varied embroidery are very brillant and elaborate. The used materials are the silks , furs, wools and cottons. Among the dick silks are used most frequently . in case of the over jacket, the precious and varied furs are used for the collar, the sleeve or the decoration and the lining cloth. In the novel, mean followd the Costume of the Man and women followed the Costume of the Han. Especially, it is a special costume that there were women in male attire. Finally, the costume of the Ch'ing had built the unique one with holding on the advantage and the short point s of the northen race and the Han's. Also , I can find the brilliant , eleborate Customes of the aristocratic class in the novel.

  • PDF

인공심장판막의 개발과 동물실험 -인공심장판막의 2차 동물실험- (The Second Animal Tests of Artificial Heart Valves)

  • 김형묵
    • Journal of Chest Surgery
    • /
    • 제23권4호
    • /
    • pp.617-621
    • /
    • 1990
  • A heart supplies blood of about 15, 000 liters to each human organ in a day. A normal function of heart valves is necessary to accomplish these enormous work of heart. The disease of heart valve develops to a narrowness of a closure, resulting in an abnormal circulation of blood. In an attempt to eliminate the affliction of heart valves, the operative method to replace with artificial heart valves has developed and saved numerous patients over past 30 years. This replacement operation has been performed since early 1960`s in Korea, but all the artificial heart valves used are imported from abroad with very high costs until recent years. New artificial heart valves have been developed in Korea Advanced Institute of Science and Technology since early 1980`s. The first developed valve was designed with a free-floating pyrolytic carbon disk that is suspended in a titanium cage. The design of the valve was tested in vitro, and in animals in 1987. The results from this study was that the eccentrically placed struts creates a major and minor orifice when the disc opens and stagnation of flow in the area of the minor orifice has led to valve thrombosis. In this work, the design of the valve was changed from a single - leaflet valve to double - leaflet one in order to resolve the problems observed in the first - year tests. Morphological and hemodynamic studies were made for the newly designed valves through the in vitro and in vivo tests. The design and partial materials of the artificial heart valve was improved comparing with first - year`s model. The disc in the valve was modified from single - leaflet to bi - leaflet, and the material of the cage was changed from titanium metal to silicon - alloyed pyrolytic carbon. A test was made for the valve in order to examine its mechanical performance and stability. Morphological and hemodynamic studies were made for the valve that had been implanted in tricuspid position of mongrel dogs. All the test animals were observed just before the deaths. A new artificial heart valve was designed and fabricated in order to resolve the problems observed in the old model. The new valve was verified to have good stability and high resistance to wear through the performance tests. The hemodynamic properties of the valve after implantation were also estimated to be good in animal tests. Therefore, the results suggest that the newly designed valve in this work has a good quality in view of the biocompatibility. However, valve thrombosis on valve leaflets and annulus were found. This morphological findings were in accordance with results of surface polishing status studies, indicating that a technique of fine polishing of the surface is necessary to develop a valve with higher quality and performance.

  • PDF

MEMS 센서를 활용한 건설현장 작업자 위치/안전 정보 추적 시스템 개발 (Development of Location/Safety Tracking System for Construction Site Workers by Using MEMS Sensors)

  • 김진영;안성수;강준희
    • 전자공학회논문지 IE
    • /
    • 제49권1호
    • /
    • pp.12-17
    • /
    • 2012
  • 유비쿼터스 기술의 발전과 더불어 다양한 응용 분야가 대두되고 있으며 특히 건설 현장 분야는 유비쿼터스 기술 및 시스템을 도입 하였을 때 많은 기대효과를 얻을 수 있는 분야이다. 건설 현장에는 항상 많은 위험요소가 존재 하며 특히 추락 사고가 높은 발생 비율을 차지하고 있다. 이러한 사고를 방지하기 위해서 안전교육 및 안전장비 착용 등 다양한 노력을 기울이고 있다. 본 연구에서는 무선 회로 (TOA, RSSI)를 구성하여 작업자의 안전정보 및 위치정보를 실시간으로 모니터링 할 수 있는 시스템을 설계하고 제작하여 측정하였다. 산업용 장비에서 많이 사용되는 ATmega128 MCU를 사용하였으며, 무선 회로를 위해서는 나노트론사의 NanoPan 5357 모듈과 TI사의 CC2500 칩셋을 사용하였다. 또한, 주변환경 정보를 취득하기 위해서 3축가속도 및 압력 MEMS센서를 적용하였다. 이를 통해 작업자의 이동여부 및 고도정보를 판단할 수 있도록 시스템을 개발하였다. 응용소프트웨어는 NI사의 Labview 소프트웨어를 이용하여 개발을 진행하였다. 작업자가 위험지역에서 안전장비(안전고리)를 착용하지 않을 경우 서버 관리자와 작업자에게 경고 알람을 울리도록 시스템을 개발하였다.

서양 예술작품에 나타난 넥타이의 역사적 고찰 (A Development of Necktie Design in Western Art)

  • 이의정;정세희
    • 한국의상디자인학회지
    • /
    • 제8권1호
    • /
    • pp.81-96
    • /
    • 2006
  • This study aimed to investigate the sociocultural phenomena which affected to clothing change in 1650-1900 and to examine the features of men's necktie in the western art. For this study, information about historic neckwear is obtained from the visual evidence of painted or engraved portraits, contemporary written sources. The covered area of this study was Europe mainly England and France. For this process, research steps were as follows : 1. Investigating the sociocultural phenomena which affect to clothing change through 1650-1900 and analysis of men's clothing and appearance. 2. Finding the changing characteristics of neckties including it's different types, shapes, knots, colors and materials and analyzing similarities and differences of neckties by the times. 3. Examining necktie as one of important and representative icons of male gender identity. The results of the study was as follows: 1. In 1660-1900, men's fashion was simplified in color and detail due to the influence of practical Puritanism and matured civil culture. And British men's fashion spreaded throughout whole European countries and get popularity. 2. In 1650-1720, there were band, cravat and steinkirk. And expecially cravatier, a expert custodian of cravats, was appeared in that period. In 1720-1800, there were stock, solitaire and cravat. In 1800-1850, neckwear were popularized and got various sizes and types up to shape and size of chemise collars. Black stock, scarf cravat and shawl cravat were popular and terms of 'necktie' were used for an certain neckcloth shape. And abundant literature for necktie were published thanks to the development of printing technology in that period. In 1851-1900, the leady-made neckties were spreaded and there were changes in shape, length, knot of necktie up to V-zone formed with shirt's collars and vest types. Neckwear was gradually evolving through four distinct styles, bow tie, scarf or neckerchief, Ascot and four-in-hand. 3. After the mid-l7th Century, as civil culture matured and splendid and extravagant colorful men's wear disappeared, British men's fashion spreaded throughout whole European countries and got popularity. The necktie become an essential ornamental accessory of men's fashion and one of important and representative icons of male gender identity.

  • PDF

수도권 보행터널 내부에 존재하는 비산 먼지와 방사선량의 연구 (The Study of Scattering Dust and Radiation Dose in Pedestrian Tunnels in Metropolitan Area)

  • 정홍문
    • 한국방사선학회논문지
    • /
    • 제14권4호
    • /
    • pp.385-390
    • /
    • 2020
  • 외부의 환경적인 요인은 인간 건강에 많은 영향을 준다. 특히 요즘시대에 가장 중요한 맹점은 미세먼지이다. 미세먼지는 인간의 호흡기를 통해 흡입되면 폐 속에 깊이 침투되기 때문에 다양한 건강 문제를 발생시킨다. 우리의 생활주변 환경에서는 자동차와 사람이 통행할 수 있는 터널을 쉽게 볼 수 있다. 이번 연구에서는 서울 및 경기도 내의 보행 가능한 터널 7개를 무작위로 선정하여 터널 내부의 먼지 량과 비산 방사선량을 측정하여 먼지 량과 방사선량의 상관관계를 알아보고자 하였다. 측정방법은 날씨가 좋은날 (미세먼지수준: 0~30 ㎍/㎥)과 보통날 (미세먼지수준: 0~80 ㎍/㎥)을 선택하여 터널내부의 먼지 량과 방사선량을 각각이 측정하였다. 측정 결과는 미세먼지 수준이 적은 날 즉, 날씨가 좋은 날은 보행터널 중심에서 10-20 % 먼지가 증가되었으며 미세먼지의 수준이 보통인 날은 터널 초입보다는 터널 중심에서 20-30 % 의 먼지가 증가되는 결과를 얻었다. 반면에 방사선량의 터널 측정결과는 날씨에 의존하지 않고 터널 초입보다는 터널 중심에서 10-20 % 방사선량이 증가가 되는 것으로 측정되었다. 결론적으로 사람이 오랜 시간터널에 머무를 경우에는 비산 먼지와 비산 방사선에 주의를 기울여야한다. 따라서 빈번하게 일반인이 터널보행 시에 본인의 건강을 위해 PM2.5 이하의 필터 마스크 착용을 권고한다.

방사선과 대학생이 방사선피폭관리에 대한 지식, 태도, 행위에 관한 연구 (A Study on Perceptions by College Students of Radiology about the Knowledge, Attitudes and Behaviors of Radiation Exposure Management)

  • 여진동;고인호;김혜숙
    • 한국방사선학회논문지
    • /
    • 제9권2호
    • /
    • pp.79-99
    • /
    • 2015
  • 본 연구의 조사대상은 대구, 경북지역에 소재한 대학교에 재학 중인 방사선과를 전공하는 대학생을 조사대상으로 2014년 2월 3일부터 2월21일까지 설문조사를 실시하여 다음과 같은 결과를 얻었다. 1. 방사선피폭관리에 대한 지식에 대해서는 'X선의 차폐는 납이나 콘크리트로 된 물질이 가능 하다', '인체에서 생식선은 방사선에 매우 민감한 부분이다' 문항에서 가장 높은 점수를 보였고, '직업상 피폭선량은 규정된 5년간에 대해 평균하여 연간 20 mSv를 넘을 수 없다'는 방사선피폭관리에 대한 지식이 가장 낮은 점수를 보였다. 2. 방사선피폭관리에 대한 태도에 대해서는 '방사선피폭과 관련하여 정기적인 건강진단을 받아야한다'. '방사선 조사지역에서 작업 시 방호복을 착용해야한다'는 문항에서 가장 높은 태도 수준을 보였고, '방사선장치의 선량보정 (Calibration)을 위한 선량측정을 정기적으로 해야 한다'는 방사선피폭관리에 대한 태도에서 가장 낮은 태도수준을 보였다. 3. 방사선피폭관리에 대한 행위에 대해서는 '방사선 조사 시 방어벽(판) 뒤에서 작업을 한 다'. '방사선피폭관리에 관한 교육을 정기적으로 받는 다'는 문항에서 가장 높은 행위 수준을 보였고, '근무지의 방사선 관련 장비가 순조로운 작업 상태로 되어 있는가를 사용 전 점점(Check)한다'는 가장 낮은 행위 수준을 보였다.

치면열구전색제의 도포 시 전색제에 따른 기포 발생 양태 (BUBBLE BEHAVIOR OF PIT AND FISSURE SEALANT)

  • 김현진;이난영;이상호
    • 대한소아치과학회지
    • /
    • 제34권1호
    • /
    • pp.99-105
    • /
    • 2007
  • 치면열구전색제의 도포 시 발생하는 기포는 전색제의 두께 감소에 의한 강도의 저하로 파절 및 마모를 일으킬 수 있으며 특히 계면부에 발생한 경우 미세 누출 등의 임상적인 문제점을 가져온다. 본 조사에서는 치면열구전색제 중 Teethmate $F-1^{(R)}$(Kuraray, Japan), Ultraseal $XTplus^{(R)}$(Ultradent, USA), $Clinpro^{(R)}$(3M-ESPE, USA), $Helioseal^{(R)}$(Ivoclar-Vivadent, Liechtenstein)의 기포 발생 양태를 알아보고자 하였다. 자연치 교합면의 열구를 모방한 표준화된 시편을 제작하고 치면열구전색제를 각 군별 20개의 시편에 전색하고 광중합시킨 후 열구 중앙을 절단하여 stereoscope(Olympus SZ61, Japan)으로 확대하여 관찰하였고 컴퓨터 영상분석 프로그램(Image Pro plus Express, Mediacybermetics Co., U.S.A)을 통하여 기포의 발생 양태를 관찰하여 다음과 같은 결론을 얻었다. 1. 기포의 발생 빈도는 Ultraseal $XT^{(R)}$ plus에서 사용 시간과 관계없이 $Helioseal^{(R)}$에 Clinprotip과 metal canula tip을 적용한 경우보다 더 높게 나타났다(p<0.05). 2. 기포의 단면적 당 개수는 Ultraseal $XT^{(R)}$ plus old가 $Clinpro^{(R)}$, $TeethmateF-1^{(R)}$, $Helioseale^{(R)}$에 brush tip을 적용한 경우보다 많이 발생하였다(p<0.05). 3. 기포의 평균 단면적은 Teethmate $F-1^{(R)}$가 다른 군에 비해 큰 값을 보였다(p<0.05). 4. $Clinpro^{(R)}$와 적용 tip을 달리한 $Helioseal^{(R)}$의 경우 기포의 발생 빈도, 평균 개수, 평균 단면적 모두 유의차를 보이지 않았다(p>0.05).

  • PDF

수복 공간이 부족한 환자에서의 완전구강회복 (Full Mouth Rehabilitation in a Patient with Limited Restorable Space)

  • 임광길;김대곤;조리라;박찬진
    • 구강회복응용과학지
    • /
    • 제26권2호
    • /
    • pp.145-156
    • /
    • 2010
  • 치아 우식, 치주 질환, 치아 파절 등으로 다수의 구치가 상실된 환자의 경우 대합치의 정출, 잔존 치아의 과도한 교합 하중으로 인한 교합 외상의 문제가 발생된다. 대합치 정출이 발생된 경우 인접 조직의 성장도 이와 동시에 발생되고 보철을 위한 악간 공간의 상실을 동반하게 되며 교합 외상으로 인한 치아에 동요도 증가 및 교모에 의한 마모도 증가하게 된다. 이러한 구치의 다수 상실, 대합치 정출 및 잔존치의 교모 증가를 동반한 환자에 있어서는 적절한 치주 수술(치관 연장술, 골 절제술 등) 및 수직 교합 고경의 회복을 통한 잔존 치아와 상실된 치아의 수복이 필요하게 된다. 본 증례의 환자는 상실된 구치의 수복을 주소로 내원한 환자로 구치부 상실 및 잔존치의 마모된 치열을 지녀보철 수복을 위한 공간을 위해 수직고경을 증가시켜 치료한 치험예를 문헌 고찰과 함께 보고하고자 한다.