• Tunnel and Underground Space
• /
• v.24 no.6
• /
• pp.449-463
• /
• 2014

There are many case studies and application cases in abandoned mines for hydraulic filling method filled by slurry or paste form, but research on the pneumatic filling is not applied in Korea. The damage of steel pipe is occurred by wear due to the flow of filling material in the bent area of steel pipe in traditional pneumatic filling method. In this study, the new pneumatic filling method was developed using a newly devised improved nozzle to improve the above problem. The model test for mine filling was performed in the laboratory for the simulated accessible or inaccessible mine cavities, and the filling efficiency by the results obtained from the test was calculated. The filling efficiency was analyzed from the variation of outlet angle, feed rate and grain size of sand in model test of simulated accessible mine cavity. The superiority of improved pneumatic filling method was proved through the analysis of filling efficiency by the results obtained from each model tests of gravitational, traditional, and improved filling method in simulated inaccessible mine cavity.

• Weed & Turfgrass Science
• /
• v.3 no.4
• /
• pp.329-335
• /
• 2014

This study was performed to study characteristics of new zoysiagarass cultivar 'Green Ever' (Plant Variety Protection Application no. 2014 - 02). 'Green Ever' was developed by selection breeding among 100 native zoysiagrasses collected in South Korea. 'Green Ever' showed specific bands (1.48 kb with OPC14 and 1.05 kb with OPD5) which were distinct from 'Anyang Joonggi' or 'Dongrae Koryogi' in RAPD analysis. 'Green Ever' was classified as Z. matrella in morphological evaluations including plant height ($6.8{\pm}0.5cm$), leaf width ($2.0{\pm}0.1mm$), height of lowest leaf ($1.9{\pm}0.1cm$) and seed length ($3.0{\pm}0.1mm$), which was similar with morphological characteristics of 'Dongrae Koryogi'. Turf quality, shoot density and chlorophyll content of 'Green Ever' were higher than them of 'Anyang Joonggi' and 'Dongrae Koryogi' under intensive management such as fairway on golf course, especially shoot densities of 'Green Ever' were excellent higher than 'Anyang Joonggi' and 'Dongrae Koryogi' during experimental periods. It could be extensively used in fairway, teeing ground of golf courses and landscape garden after further study about various environmental adaptabilities such as winter kill, wear tolerance etc.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.6
• /
• pp.873-886
• /
• 2014

This study conducted a survey on jean pants that targeted males in the 20s in order to select preferred brands for skinny jean pants. Preliminary data for the pattern development of skinny jean pants was presented through functionality evaluation, appearance evaluation and pattern analysis. The results were as follows. 1. The result of survey targeting males in the 20s to select the design and brand name of jean pants showed that skinny jean pants were selected as the most favorite type of jean pants to wear; in addition, non-brand products and brand names such as Uniqlo and Levi's were also preferred. 2. The result of functionality evaluation showed that L brand received a high score in all items except for items regarding the knee circumference and mid-thigh circumference, S brand received a high score as well as a low score, and N brand received a low score in general. The result of appearance evaluation showed that L brand for the waist height and waist circumference, N brand for the brand crotch circumference, posterior crotch length and knee circumference, and S brand and N brand for the length of pants were preferred. 3. The result of pattern measurements analysis from the result of functionality evaluation showed that L brand provided a large pattern measurement for the waist height, L brand provided less ease due to small pattern measurements for waist circumference; in addition, N brand for the knee circumference and mid-thigh circumference were preferred. 4. The analysis result shows that a ease of 5cm based on the belly band which is 3.5cm below the belt width is proper for the waist circumference when designing a skinny jean pant pattern and 4cm for the hip circumference and 32.5cm for the ease of crotch circumference are proper, -0.4-0cm for the ease of mid-thigh circumference and knee circumference in consideration of human body measurements; therefore, 80.1-80.5cm for inseam as the length from the crotch height to the leg length, 25.7cm for vertical hip length and 53.0cm for crotch length are proper.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.8
• /
• pp.1035-1041
• /
• 2013

To evaluate the structural integrity and dynamic characteristic of the knuckle part of a KTX anti-roll bar, an experimental and a numerical approach were used in this study. In the experimental approach, the acceleration and strain data for the knuckle parts of the KTX and KTX-SANCHUN anti-roll bar were respectively measured to evaluate and compare its structural dynamic characteristics under the operating environments of the Honam line. In the numerical approach, the evaluation of its structural integrity was conducted using LS-DYNA 3D, and then, the reliability of the finite element model used was ensured by a comparative evaluation with the experiment. The numerical results showed that the stress and velocity field of the knuckle part composed of a layered structure of a thin steel plate and rubber were more moderate than those of the knuckle part made of only a thick steel block owing to the reduction of relative contact between the knuckle and the connecting rod. It was found that the knuckle part made of a thin steel plate and rubber was recommended as the best solution to improve its structural integrity resulting from the elastic behavior of the KTX anti-roll bar being enabled under a repeating external force.

• Journal of Korean Ophthalmic Optics Society
• /
• v.10 no.4
• /
• pp.313-321
• /
• 2005

To know the pollution level concerning the microbes contamination condition in soft contact lenses, 2 experiments were operated with different methods. Firs experiment, we observed lenses surfaces through a scanning electronic microscope after pollution sort contact lenses with the suspensions of Staphylococcus aureus, Pseudomonas aeruginosa and Entrobacter aerogenes which can be major bacteria causing keratitis as wearing on soft contact lenses. As 1 hour after pollution with the soft contact lenses, we observed that many bacteria adhered to the lenses, and the pollution condition got worse with passing time increase(2, 4, 6, 12, and 24 hours, respectively). At 12 hours lapse of polluting soft contact lenses with P. aeruginosa, some bacteria adhered to the lenses. And as 24 hours lapsed after pollution soft lenses with E. aerogenes, bacteria adhered to them, and atypical substance was observed some of the surface of lenses. Second experiment, we observed the microbe pollution condition in soft contact lenses by let 21 people in twenties(men & women), who doesn't eye disorders, wear soft contact lenses during 4 hours. As the result, many kinds of bacterium and fungus were observed, and especially, the bacteria could be identified with their colors and the shapes of colony, so we found that single type, two types, and three types of bacteria adhered to their lenses.

• International Journal of Highway Engineering
• /
• v.13 no.3
• /
• pp.75-82
• /
• 2011

There is the uncertain period of the construction in case of the products meeting the quality standard of KS M 6080, the quality is degraded because of the abrasive loss of the paint caused by vehicle tires as the traffic amount increases and of the loss and detachment of the glass beads providing the retroreflective function. The abrupt degradation of visibility causes the high frequency of traffic accidents at night and increases the traffic accident rate. Additional supplementary construction induces the direct material and construction costs. As the more cost induction effect than the direct cost, the traffic jam caused by the additional construction increases the indirect social costs such as time cost and vehicle cost. Hence, the study is concerned with performing the abrasion resistance test based on the EN 1436 standard to check and improve the quality of various road marking materials resulting in improving the durability of road marking materials. However, even though the difference in the durability lifetime of resins(binders) is bibliographically or theoretically clear, there was no difference in the durability lifetime (retroreflectivity aspect) of the road marking paint using these binders. The reason is that the bonding of beads was very insufficient or that the cross density caused by crack or freshness was low. Moreover, the measured wet retroreflectivity was distributed as the Rw3 or higher class in average on the basis of EN 1436 but was very insufficient on the basis of the minimum wet threshold retroreflectivity with 100mcd/($m^2{\cdot}lx$) managed overseas.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.12
• /
• pp.1106-1113
• /
• 2013

For patients who have senile mental disorder such as dementia, quantity of excercise and amount of sunlight are important clue for dose and the treatment. Therefore, monitoring health information of daily life is necessary for patients' safety and healthy life. Portable & wearable sensor device and server configuration monitoring data are needed to provide these services for patients. Watch-type device(smart watch) which patients wear and server system are developed in this paper. Smart watch developed includes GPS, accelerometer and illumination sensor, and can obtain real time health information by measuring the position of patients, quantity of exercise and amount of sunlight. Server system includes the sensor data analysis algorithm and web server that doctor and protector can monitor through sensor data acquired from smart watch. The proposed data analysis algorithm acquires quantity of exercise information and detects step count in patients' motion acquired from acceleration sensor and to verify this, the three cases with fast pace, slow pace, and walking pace show 96% of the experimental result. If developed u-Healthcare System for dementia patients is applied, more high-quality medical service can be provided to patients.

• Journal of the Korean Home Economics Association
• /
• v.28 no.1
• /
• pp.21-41
• /
• 1990

All the cultures are enriched and developed themselves through the contact with another culture, which propagate and transplant its new cultural elements to a time-honoured tradition. Therefore, the investigation of the origin of each culture means to find out the all the elements of each culture itself in the end. In Korean Costume, we can find both the Costume of frizid jone and that of temperate jone togther, effected by the influence of typical continental climate. Accordingly, we can also realize that both Lee, of southern tribe and Haw, of northern tribe suitable for the protection of cold weather, existed in Korea. Even Lee and Hwa were used together, Hwa had been appeared earlier than Lee along with the Skitai Costume and we can find its origin in the line of Skitai costume. In Central Asia, Tadjhik was the only race tracing their ancestry from ancient Iranic genuinely and they had been keeping the culture of Skitai origin continuously. The purpose of this thesis is to examine Korean's own culture of the footwear through the investigation of Tadjhik's culture of costume, specially through the culture of Tadjhik footware. To reach the conclusion of this thesis, the comparision and investigation between Korea and Tadjhik was made carefully for the followings, culture of life and costume, forms and materials of footwear. 1. The treasers and boots made by leather and felt was the origin of costume culture of Central Asia and aboves were appeared in persian costumn for the first time. We can consider that those had connection with Korean culture of costume. 2. Form of Tadjhik footwear can be devided by hwa and Lee, and there was a big difference in form between that of mountain area and plain area. We can find more rariety in footwear of mountain area. 3. If we compare the form of Hwa and Lee of Tadjhik with our own footwear, we can find out many things in common and there are lots of similarities particularly in form and material. 4. We can say that the difference of Tadjhik and Korean was the preference of Hwa for Tadjhik and Lee for Korean, aboves came from the different totography, climate condition and life style. 5. The form of male and female footwear of tadjhik was almost similar, but female footwear had various and beautiful decorations for the ornament. 6. The materials of Tadjhik footwear was mostly leather, and Hwa was used particularly for labour purposes. 7. We can expect that Tadjhik of Central Asia and Korea had a similar orgin and style on the footwear. It can be expected that we can find out many common things in further investigation of the study of Tadjhik costume and will exert the examination continuously.

• Journal of the Korean Society of Costume
• /
• v.58 no.3
• /
• pp.63-78
• /
• 2008

Since 1960, minimalism has been one of the fashion phenomenon and turned out in many different ways. After postmodernism which contains negotiation and pluralism, appeared in 1980, there was a new wave of post minimalism that inherited 1960's minimalism. Minimal style which come out of 60's fashion, is marked by simplicity, minimal expression, and monochrome color, and it shows up simple style with no decoration. It opened up a young fashion period, and we saw minimal style in sports wear which utilized simplicity and function with spread of sports in the 70's. And also since 1980, Post-Modern widely influenced the idea about modern culture as well as complicated clothes getting rid of fixed concept, seeking to break the boundary between culture and life which were seek in fashion and personality as well as various characteristic, Accordingly in different ages, The style and image were borrowed from different culture and natural environment mixing the image, cultural phenomena like these appearing in complexity and expression, variety and possibility of new vision was expanded. Since 1980, Fashion has become more gradually diversity, high classed, required of each individuality. The phenomenon of fashion reappearance which was influenced by minimalism is continued to 2000. The Oriental style fashion is still attracted, so The new term "Ethic Minimalism" has appeared along with the trends which is put together. Therefore the purpose of this study is to search the concept and the characteristics of ethnic minimalism, to consider the relationship between minimalism and ethnic minimalism, and reveal the characteristic of ethnic minimalism happened to modern fashion. The study method went through literature research and practice research. The range of this study is oriental fashion spanning of from 1960 to current day. Photo records from this period show well the spirit of the oriental and the personality of minimalism. The oriental representative designer and western representative designer are centered Consequently, The formative characteristics of ethnic minimalism are simple, pure, unbalanced free style and representing the phenomena of compromise, blending oriental and western fashion. Structually, Elements of space and plane are emphasized, colors are restricted, and materials are composed mainly of natural fiber. So, minimalism based on simplicity combined with a structure of oriental spiritual depth and space, It could be called ethnic minimalism as a rational fashion.

• Fire Science and Engineering
• /
• v.33 no.6
• /
• pp.165-172
• /
• 2019

This study presents the design and manufacture of a self-contained breathing apparatus SCBA wireless communication module with a multipoint simultaneous full-duplex communication system to enable communication between team members wearing the SCBA system. It is necessary for fire-fighters to wear the SCBA system during extinguishing and rescue work at the fire site. Evaluation of the team communication module confirmed the feasibility of communication over more than 500 m in the test condition based on the line of sight. By implementing the Ad-hoc function, it was confirmed that the communication distance could be extended to 128 m by automatic routing up to 3 hoc. The vertical distance inside the building for successful communication was up to the 5th floor in the open staircase and up to the 3rd floor in the partitioned staircase. Furthermore, the performance testing of the communication module assuming a fire situation, confirmed that five team members correctly recognized the standard abbreviation of fire and wireless communication without a separate PTT key operation. In addition, the flame resistance was verified by exposing the module to a flame at 950 ± 50 ℃ for 5 s and then immediately extinguishing the flame.