• 패션비즈니스
• /
• 제3권1호
• /
• pp.65-80
• /
• 1999

In this study, the researcher studied the historical background and the traditional culture about dress and ornament of Yunnan Province of China. The Results of the study are as follows. 1. In the Past, Derung's dress was very simple due to the influence of various factors, such as geography and history. Men wore shorts and covered diagonally a piece of cloth from left shoulders to right armpits and tied up the two ends on chests. Women covered crisscross two pieces of cloth from both shoulders to knee. 2. Achang people's dress and adornment has its own unique characteristic. Generally, men wear Jackets with buttons down the front and black trousers. Unmarried men like to wear white turbans, while most of married men usually wear dark blue ones. Women usually wear tight-sleeve blouses with buttons down the front and skirts. Unmarried women wear the hair in braids coil them on the top of their heads. They wear short blouses and trousers. Married women wear their hair Into buns and like to entwine black or blue cloth into high trubans. They wear short blouses and knee-length straight skirts. Achang knife enjoys high reputation and has a long history and an exquisite workmanship. All the men like to wear it. 3. The dress and adornment of the Lahu nationality has both the characteristic of farming culture and the style of nomadic culture of early times. Men usually wear short shirts with round necks and buttons down the front, loose-legged trousers, turbans or dark blue cloth caps Women's dress and adornment can be categorized into two styles. One is black cloth gown with buttons diagonally on the right front and waist-length slits on both sides. The edges of fronts and cuffs are edged with Silver ornaments and lace. They also wear trousers. The other is short blouse with round neck and short opening on th right front, straight skirt and colourful leggings with embroidered patterns. 4. The Hani people, men and women, old and young, like black colour and are fond of wearing black clothes. Men usually wear shirts with buttons down the front and trousers, entwining their heads with black or white cloth. The elderly people wear calottes. Women wear cloth blouses, skirts and trousers or shorts. Slight differences exist in the clothing and adornments according to region, branch and age 5. Blang people's dyeing technique with an exquisite method has a long history. Men wear dark blue long sleeve shirts with round necks and buttons down the front or arranged diagonally on the front and loose-legged trousers. Elderly men wear big turbans wdress and adornment varies greatly in different regions. 6. The Lisu people culture of dress and adornment has some unique characteristics. The styles and colours of their dress and adornment differ slightly from place to place. In the Nujiang area, Women wear black velvet Jackets over blouses with buttons arranged diagonally on the right front and long pleated ramie skirts. Men usually wear wraparound ramie gowns, with center vent, made of fabrics alternated with white and black cross stripes. They also wear cloth waistbands and trohile youngsters keep their hair short. Women's users. In the Lushui area, the dress and adornment is similar to that in the Nujing region, but women wear aprons and trousers instead of skirts. 7. The Nu people dress and adornment is simple but elegant Women are proficient in ramie-weaving. Men usually wear gowns With overlapping necks, knee-length trousers and leggings. They like to wear their hair long and entwine dark blue or white turbans. Women wear black and red vests over blouses with buttons arranged diagonally on the right front and ankle-length skirts. They also wear their hair long, make it into braids, and entwine dark blue or colourful cloth turbans. 8. Pumi men usually wear ramie shirts With buttons arranged diagonally on the right front, loose trousers and white sheepskin vests. Some also wear overcoats made of "pulu". Women's dress and adornment varies in different areas. In the Lanping and Weixi regions, women wear white short blouses with buttons arranged diagonally on the front and dark brown embroidered vests. They also wear trousers and blue or black cloth turbans. In the Ninglang and Yongsheng regions, women wear hemmed blouses With buttons arranged diagonally on the right front and drape sheepskin capes. They also wear white pleated skirts and use broad colourful cloth as their waistbands.

• Composites Research
• /
• 제16권3호
• /
• pp.75-84
• /
• 2003

본 연구의 목적은 가압주조법에 의해 제조된 Saffil/Al, Saffil/$\textrm{Al}_2\textrm{O}_3$/Al, Saffil/SiC/Al 과 같은 혼합금속 복합재료의 마모 물성을 조사하고자 하는 것이다. 마모 시험은 건조와 윤활상태 하에서 pin-on-disk 형태의 마모 시험기로 수행되었다. 세가지 금속복합재료의 마모 물성시험에서 Saffil섬유, $\textrm{Al}_2\textrm{O}_3$입자, SiC입자의 효과들을 조사하였다. 마모 메커니즘은 복합재료의 마모된 표면들을 관찰하여 분석하였다. 마모과정 동안 마찰계수(COF)의 변화는 컴퓨터에서 자동적으로 기록되었으며, 건조 조건에서 Saffi1/SiC/Al은 고온과 높은 하중 하에서 가장 좋은 마모 저항을 보여주었다. 한편 Saffil/ Al과 Saffi1/$\textrm{Al}_2\textrm{O}_3$/Al의 마모 저항은 비슷한 결과를 보였다. 건조조건에서 적당한 하중과 상온에서 지배적인 마모 메커니즘은 연삭 마모이며, 하중이나 온도가 증가함에 따라 응착마모로 변화되며, 고온에서는 융착마모를 나타내었다. 건조 상태에서 세가지 복합재료를 비교시 액체 파라핀에 의한 윤활시험시 마모 특성이 가장 좋은 결과를 나타내었다. 윤활조건에서는 Saffil/Al복합재료가 가장 좋은 마모 저항성을 보였으며, 이 경우 마찰계수도 가장 작게 나타났다. 윤활 조건에서 금속복합재료의 주요 마모 메커니즘은 microploughing 이었으나, microcracking 역시 다른 정도에서는 미소 균열도 발생한다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.390-394
• /
• 2004

This is the study on dry sliding wear behavior of unidirectional carbon fiber reinforced epoxy matrix composite at ambient temperature. The wear rates and friction coefficients against the stainless steel counterpart specularly processed were experimentally determined and the resulting wear mechanisms were microscopically observed. Three principal sliding directions relative to the dominant fiber orientation in the composite were selected. Wren sliding took place against smooth and hard counterpart, the highest wear resistance and the lowest friction coefficient were observed in the antiparallel direction. When the velocity between the composite and the counterpart went up, the wear rate increased. The fiber destruction and cracking caused fiber bending on the contact surface, which was discovered to be dominant wear mechanism.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.101-108
• /
• 1999

This paper was undertaken to do morphological analysis of wear particles for sliding members hydrauric rotary acuator. The lubricating wear test was performed under different experimental conditions using the wear test device and wear specimens of the pin on disk type was rubbed in paraffinic base oil by three kinds of lubricating materials, varying applied load, sliding distance. The four shape parameters (50% volumetric diameter, aspect, roundness and reflectivity) are used for morphological analysis of wear particles. The results showed that the four shape parameters of wear particles depend on a kind of the lubricating materials. It was capable of presuming wear volume for three kinds of materials on driving time.

• Tribology and Lubricants
• /
• 제14권2호
• /
• pp.63-74
• /
• 1998

The damage of cam/tappet surface is one of the major reasons for energy loss in an I.C. engine. High friction causes the accelerated wear of the cam/tappet surfaces which in turn changes the valve opening/closing timing. During the accelerated test evidence of both rolling fatigue and sliding abrasive wear could be found. Based on the results of the accelerated test, a scheme was devised to decrease tappet wear. Wear reduction of the tappet was achieved by using undulated surface topography in the tappet center region. The wear reduction is achieved by trapping of the wear particles in the undulations as well as by increasing the supply of lubricant to the sliding interface.

• Tribology and Lubricants
• /
• 제18권4호
• /
• pp.299-304
• /
• 2002

This paper reports the studies on the wear-corrosion behavior of ductile cast iron in the acidic environment. In atmosphere and variety of pH solution, specific wear rate and wear-corrosion characteristics of GCD 60 with various sliding speed and distance were investigated. And electrochemical polarization test of GCD 60 was examined in the environment of various pH values. The main results are as following : As the contact pressure increases, the critical velocity of specific wear rate becomes transient at low sliding speed. As pH value becomes low, wear-corrosion loss increases in the aqueous solution. As the corrosion environment is acidified, corrosion potential of GCD 60 becomes noble and corrosion current density increases.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제31회 춘계학술대회
• /
• pp.62-67
• /
• 2000

This paper was undertaken to do morphological analysis of wear debris for slipper-Pad of hydraulic rotary acuator. The lubricating wear test was performed under different experimental conditions using the wear test device and wear specimens of the pin on disk type was rubbed in paraffinic base oil by three kinds of lubricating materials, varying applied load, sliding distance. The four shape parameters(50% volumetric diameter, aspect, roundness and reflectivity) are used for morphological analysis of wear debris. The results showed that the four shape parameters of wear debris depend on a kind of the lubricating condition. It was capable of presuming wear volume for slipper-pad of hydraulic rotary acuator on driving time.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2000년도 제31회 춘계학술대회
• /
• pp.68-75
• /
• 2000

The development of flexible automation in the manufacturing industry is concerned with production activities performed by unmanned machining system. A major topic relevant to metal-cutting operations is monitoring tool wear, which affects process efficiency and product quality, and implementing automatic tool replacements. In this paper, the measurement of the cutting force components has been found to provide a method for an in-process detection of tool wear. Cutting force components are divided into static and dynamic components in this paper, and the static components of cutting force have been used to detect flank wear. To eliminate the influence of variations in cutting conditions, tools, and workpiece materials, the force modeling is performed for various cutting conditions. The normalized force disparities are defined in this paper, and the relationships between normalized disparity and flank wear are established. Finally, Artificial neural network is used to learn these relationships and detect tool wear. According to the proposed method, the static force components could provide the effective means to detect flank wear for varying cutting conditions in turning operation.

• International Journal of Fluid Machinery and Systems
• /
• 제2권1호
• /
• pp.21-30
• /
• 2009

Slurry wear with sand particles in rivers is a serious problem for pump operation. Therefore, a technique to predict wear volume loss is required for selecting wear resistant materials and determining specifications for the maintenance period. This paper reports a method for predicting the wear depth distribution on the blade of an impeller. Slurry wear tests of an aluminum pump impeller were conducted. Prediction results of wear depth distribution approximately correspond with the results of slurry wear tests. This technique is useful for industrial application.

• 한국생산제조학회지
• /
• 제4권2호
• /
• pp.46-53
• /
• 1995

In this study, Wear of a ceramic cutting tool for hardened STD11 steel was investigated. Under the finish machining condition. DOC notch wear of a ceramic cutting tool was mostly occurred earlier than flank and crater wear were proceeded. The relations of DOC notch wear, which was characteristically produced at the beginning of cutting. to cutting speed, feed, depth of cut, and nose radius of a ceramic cutting tool were examined. Effective approach angle, which is a function of cutting conditions, and boundary area were suggested, and then the influence of those was investigated, The following conclusions were obtained: (1)as cutting speed was increasing. DOC notch wear was decreasing (2) the cutting condition that magnitude of slendermess ratio was made small, was favorable for DOC notch wear, (3) as depth of cut was smaller, the influence of feed on DOC notch wear was also smaller, (4) DOC notch wear was mainly influenced by effective approach angle, but by boundary area in the range of low feed.