• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.2
• /
• pp.123-131
• /
• 2002

ASC(Avionics System Computer) was developed to control weapon delivery and navigation sensors, and to perform man-machine interface with pilots for XKO-1 aircraft. The data communications between ASC and UFC(Up Front Controller), DC(Data Concentrator) were implemented by RS422 serial data bus. Also, SCIL(Standard Computer Interface Library) was designed to facilitate control and management of the computer hardware resources and is embedded in the ASC. These structures have a merit of noise immunity and a reduction of wire harness for signal lines, and enable OFP(Operational Flight Program) programmers to use the SCIL easily without knowing hardware details. Manufactured system was on installed on XKO-1, and peformed for BIT(Built In Test) and interface test with UFC and DC. The test results show that it meets the system requirements.

• Journal of the military operations research society of Korea
• /
• v.2 no.1
• /
• pp.163-176
• /
• 1976

The artillery fire is characterized by great damage that can be inflicted simultaneously to an area through concentrated firing. The field artillery guns used in R.O.K. Army are generally old. Thus high values of their velocity errors cause wide dispersion of shell landings. Therefore effects of the concentrated firing is lessened. In this paper a general model which considers all error factors involved in firing in general, is established first. Then from this a basic model which includes the errors involved in concentrated firing only, such as the ballistic error, velocity error, target density function, and damage function, is extracted. Among many weapon systems now in use a specific one called gun 'A' is selected and its concentration effects are measured through computer simulation. The results show that as the velocity error of a battery increases, its target coverage capability, i. e. concentration effect, decreases. Therefore the need arises for the field artillery commander to know beforehand characteristics, i.e. velocity errors, of the guns in his unit and also to carefully examine the problem of battery arrangement with the gun characteristics in mind in order to maximize the damage effects of his artillery unit.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.6 no.4
• /
• pp.22-28
• /
• 2003

In the conventional weapon system, such as gun and small arms, it Is a general trend that for maximization of its performance and enhancement of its effectiveness, the firing control system(FCS) is developed and applied with the guns and small arms in the world. The FCS of the small arms for infantry man is composed of a few of sensors for acquisition of input data of FCS, such as range measurement, position sensing of weapon, temperature, etc., computer, displayer and power pack, and also the air burst munition is developed in parallel for the maximization of FCS's effectiveness. Since the flight time setting fuze for the air burst munition is adapted for next me, the measuring device of the muzzle velocity is needed to overcome the variation of muzzle velocity due to producing procedures and the differences of the using temperatures and so maintain the burst position accuracy This paper contained the technical information on the development of the measuring device of muzzle velocity, which designed in compact & light weight configuration with reliability and accuracy.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.12
• /
• pp.3069-3078
• /
• 2014

This research handles the performance improvement effect by the Modeling & Simulation and shows the design, implementation, test results of the new 3-axis magnetometer which is the core component of strategic offensive deploying mine. The submarine is modelled by using the commercial electromagnetic field analysis tool on numerical value, and its magnetic field characteristic is predicted in order to apply the new magnetometer to the future underwater weapon system. The method to take the performance test results of new 3-axis magnetometer in the land is shown instead of the real test result in sea by making the miniature submarine.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.21 no.6
• /
• pp.67-81
• /
• 2011

In recently years, there are cyber-weapon aim to national infrastructure such as 'stuxnet'. Security experts of the world are paying attention to this phenomenon. The networks which controls traffic, subway, waterworks of the city are safe from threats such as computer virus, malware, because the networks were built on closed-networks. However, it's about time to develop countermeasure for the cyber-weapon. In this paper, we review status-quo of the control systems for metropolitan infrastructure and analyze the risk of industrial control system in SCADA(Supervisory Control And Data Acquisition) network. Finally, we propose a security model for control systems of metropolitan infrastructure.

• International Journal of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.58-63
• /
• 2022

Recently, the improvement of computational processing ability due to the rapid development of computing technology has greatly advanced the field of artificial intelligence, and research to apply it in various domains is active. In particular, in the national defense field, attention is paid to intelligent recognition among machine learning techniques, and efforts are being made to develop object identification and monitoring systems using artificial intelligence. To this end, various image processing technologies and object identification algorithms are applied to create a model that can identify friendly and enemy weapon systems and personnel in real-time. In this paper, we conducted image processing and object identification focused on tanks among various weapon systems. We initially conducted processing the tanks' image using a convolutional neural network, a deep learning technique. The feature map was examined and the important characteristics of the tanks crucial for learning were derived. Then, using YOLOv5 Network, a CNN-based object detection network, a model trained by labeling the entire tank and a model trained by labeling only the turret of the tank were created and the results were compared. The model and labeling technique we proposed in this paper can more accurately identify the type of tank and contribute to the intelligent recognition system to be developed in the future.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.3
• /
• pp.155-161
• /
• 2014

The objective of this study is to weight analysis portable backpack system of infantry weapon systems for ergonomic design in manual materials handling tasks. For the product design, we analyzed the ergonomic guidelines and status of similar weapon systems by comparing the efficient operation performance provide for the basic data. Result of this study, the relationship between portability and mobility presented for schematic. In the short distance of the short biomechanical criterion, 1-2 hours in the middle of moving psychophysical criterion, 4 hour or more long-distance criterion applied for the physiological criterion for easy of trade-offs that need to be considered. This study suggests for 4 research items for infantry backpack system in manual materials handling tasks. Throughout the result of anthropometric populations, the 5%tile body weight for -0.91kg but 95%tile in 34.17kg considered to be margin for free, easy and efficient operation for the weight margin between portability and mobility in manual materials handling tasks.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.1
• /
• pp.81-88
• /
• 2008

In the game balancing. it is so difficult to choose suitable arms among various actions, or arms and to accurately calculate to which level we adjust the balance. The fuzzy method can be properly used in a particular environment which cannot be correctly processed in mathematics or in lessening the time-consuming problems during the accurate number crunching. Because a variety of actions, relations with opponents. previous battle experiences etc. are not easy to be reflected in every occasion, the fuzzy method could be useful in these cases. When the balancing is needed. the data which have been played to that Point are processed by the fuzzy function and calculated to adapt intensity to each action. The ability of characters is regulated in this process. To demonstrate the efficiency of this method. I would like to make clear the excellence of fuzzy method through the following five experiments; a case with invariable ability adjustment, a case adjusted by a randomly chosen action, a case with the strongest weapon selection. a case with the weakest weapon selection and a case with the fuzzy method application.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.9
• /
• pp.105-114
• /
• 2021

ESICD(Electrical Signal Interface Control Document) refers to a document that describes protocols and data for communication between components consist of a system. Each component developer gathers at a specific place to conduct an integrated test for ESICD verification. In this case, it often happens that the integration test is delayed due to a simple mistake of software developers. There are two reasons for this situation: First, software developers do not perform sufficient verification because it is difficult to configure the system environment in a Lab, and second, they do not immediately find the cause of errors occurred during integration tests. Therefore, in this paper, we propose a strategy to effectively perform ESICD verification, which takes a lot of time between the production and implementation stage of the weapon system development stage and the system integration test stage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.417-425
• /
• 2020

Recently, the development of weapons systems in conjunction with the Fourth Industrial Revolution has increased the number of weapon systems that integrate individual commercial systems by actively incorporating the superior fields of private commercial technologies. In the case of such commercial product-based weapons systems, however, the development of ILS elements across all areas, such as technical manual, military field maintenance support equipment, interactive electronic technical manual (IETM), and Computer Based Training (CBT) development, and weapons system Reliability, Availability, Maintainability(RAM) target values, and logistics support analysis (LSA) was requested to expand the level of development by developers. The commercial product-based System Integration (SI) weapon system will be able to complete the comprehensive military balance for complementing and effective maintenance of the military and developers only when the ILS development, which is limited to the essential elements of the required group, Request For Proposal (RFP) and Post-Logistics Support (PLS) directions were applied in the framework of outsourcing maintenance implementation. As a result, by checking the operation status of current weapons systems, the logistics support of commercial product-based weapon systems selected outsourcing as the basic policy that is decided based on the development requirements, focusing on maintaining operation through a rational decision-making process, and presented a plan for applying the development plan to the RFP for the determined core elements and PLS.