• 대한전기학회논문지:전력기술부문A
• /
• 제51권11호
• /
• pp.535-543
• /
• 2002

Modern power grids are becoming more and more stressed with the load demands increasing continually. Therefore large stressed power systems exhibit complicated dynamic behavior when subjected to small disturbance. Especially, it is needed to analyze special conditions which make small signal stability structure varied according to operating conditions. This paper shows that the relation between small signal stability structure varied according to operating conditions. This paper shows that the relation between small signal stability and operating conditions can be identified well using node-focus point and 1:1 resonance point. Also, the weak point which limits operating range is found by the analysis of resonance condition, and it is shown that reactive power compensation may solve the problem in the weak points. The proposed method is applied to test systems, and the results illustrate its capabilities.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2011년도 춘계학술대회
• /
• pp.329-330
• /
• 2011

This paper concerns to the acquisition of Global Positioning System L1 C/A coded signals. It specifically addresses the issues of acquiring very low power signals which are attenuated due to special circumstances such as indoor environment or forest canopy etc. The proposed post-processing algorithm applies modified signal folding coherent integration scheme on weak signal record. It dynamically compensates the doppler effect on the length of C/A code before integrating the signal power. Experimental results show effectiveness of the algorithm on weak GPS signals recorded in a real environment.

• 한국전자파학회논문지
• /
• 제30권5호
• /
• pp.380-388
• /
• 2019

제트 엔진 변조(jet engine modulation: JEM) 신호는 제트 엔진 고유의 정보를 제공하기 때문에 표적 인식 분야에서 널리 이용된다. JEM 신호의 고유 정보인 날개 수를 얻기 위해서는 날개의 회전 속도, spool rate를 추출하는 것이 중요하다. 하지만 약한 JEM 신호에서는 회전 속도를 추출하는데 어려움을 겪는다. 이에 본 논문에서는 약한 JEM 신호에서 spool rate를 추출하는 알고리즘을 제안한다. 우선 JEM 신호에서 spool rate를 추출하기 위해서 JEM 신호 성분의 강약을 구분하는 기준을 정하여 신호를 구분한다. 그 중 약한 신호를 high-pass filtering 기반의 전처리 과정을 거쳐 spool rate 추출에 용의하도록 신호를 변형해준다. Spool rate를 추출할 수 있는 신호를 얻고 난 후, peak detection 과정을 통하여 spool peak를 찾고, spool period/rate를 추출한다. 기존의 CEMD(Complex Empirical Mode Decomposition), WD(Wavelet Decomposition)와 같은 방법보다 간단하기 때문에, 추출을 정확하게 할 뿐만 아니라 시간을 매우 절약할 수 있음을 입증하였다.

• Journal of Electrical Engineering and Technology
• /
• 제12권5호
• /
• pp.2001-2006
• /
• 2017

This paper explains the effects of the weak signal of a rotating-type electric field mill sensor fabricated for measuring the intensity of the electric field generated by high-voltage direct current (HVDC) power transmission lines. The fabricated field mill consists of two isolated electrode vanes, a motor driver, and a ground part. The sensor plate is exposed to and shielded from the electric field by means of a rotary shutter consisting of a motor-driven mechanically complementary rotor/stator pair. When the uncharged sensor plate is exposed to an electric field, it becomes charged. The rotating electrode consists of several conductive vanes and is connected to the ground part, so that it is shielded. Determining the appropriate design variables such as the speed of the vane, its shape, and the distance between the two electrodes, is essential for ensuring optimal performance. By varying the speed, the weak signal characteristics which is used to signal processing and calibration experiment are quite different. Each weak signal pattern was analyzed along with the output voltage characteristics, in order to be able to determine the intensity of the electric field generated by HVDC power transmission lines with accuracy.

• 한국통신학회논문지
• /
• 제10권3호
• /
• pp.123-129
• /
• 1985

본 연구는 100kHz의 대역폭에서 SNR이 0dB 정도인 미소신호의 존재유무를 판단하기 위한 임계치 결정방법에 대하여 기술한 것이다. 검출방법은 니만-피어슨등의 전통적인 방법에 비해서 미소신호에 적합한 LOD방법을 적용한 것이다. 검출의 대상신호는 데이터전송이나 모르스부호 전소에 사용되는 OOK변조신호이고, 잡음은 전송로에서 일반적으로 존재하는 라프라시안형의 비가우시안형을 대상으로 하였다. 실험결과, 오판확률을 임의의 값으로 고정시키고, 한 점의 임계를 취한 경우에서의 검출확률과 두 점의 구간임계점을 상호, 비교한 결과 후자의 검출방법이 현저히 향상됨을 확인하였다.

• Journal of Positioning, Navigation, and Timing
• /
• 제6권4호
• /
• pp.135-140
• /
• 2017

This paper proposes a signal merging algorithm to increase the signal-to-noise ratio (SNR) of a GPS correlator output to estimate the roll angle of a rotating vehicle in a weak GPS signal environment. Rotation Locked Loop (RLL) algorithm is used to estimate a roll angle using the characteristics that the power of the GPS signal measured at the receiver of a rotating vehicle varies periodically. First, delay times are calculated to synchronize GPS signals using satellites' and receiver's positions and the rotation frequency of a vehicle, and then correlator outputs are delayed in time and merged with each other, resulting in the increase of an SNR in a correlator output. Finally, simulations are conducted and the performance of the proposed algorithm is validated.

• 한국통신학회논문지
• /
• 제31권1C호
• /
• pp.1-7
• /
• 2006

이 논문에서는, 약한 다진 신호에 알맞도록 1부에서 제안한 검파기준을 바탕으로 간섭이 충격성일 때 초광대역 다중접속 시스템에 알맞은 검파 기법을 살펴본다. 제안한 검파기는 최대 비슷함 검파기준을 바탕으로 한 최적 검파기와 견주어 볼 때 얼개가 더 간단하고 성능이 거의 같다. 한편, 간섭이 충격성일 때, 제안한 검파기는 정규 환경에 최적화된 검파기보다 성능이 더 좋다는 것도 보인다.

• Journal of Information Processing Systems
• /
• 제16권6호
• /
• pp.1343-1358
• /
• 2020

In the stagewise arithmetic orthogonal matching pursuit algorithm, the weak threshold used in sparsity estimation is determined via maximum iterations. Different maximum iterations correspond to different thresholds and affect the performance of the algorithm. To solve this problem, we propose an improved variable weak threshold based on the stagewise arithmetic orthogonal matching pursuit algorithm. Our proposed algorithm uses the residual error value to control the weak threshold. When the residual value decreases, the threshold value continuously increases, so that the atoms contained in the atomic set are closer to the real sparsity value, making it possible to improve the reconstruction accuracy. In addition, we improved the generalized Jaccard coefficient in order to replace the inner product method that is used in the stagewise arithmetic orthogonal matching pursuit algorithm. Our proposed algorithm uses the covariance to replace the joint expectation for two variables based on the generalized Jaccard coefficient. The improved generalized Jaccard coefficient can be used to generate a more accurate calculation of the correlation between the measurement matrixes. In addition, the residual is more accurate, which can reduce the possibility of selecting the wrong atoms. We demonstrate using simulations that the proposed algorithm produces a better reconstruction result in the reconstruction of a one-dimensional signal and two-dimensional image signal.

• 한국통신학회논문지
• /
• 제30권9A호
• /
• pp.705-713
• /
• 2005

이 논문에서는 약한 다진 신호에 알맞은 검파기준을 제안한다. 제안한 검파기준은 신호 세기가 0에 가까울 때 잘못 확률을 가장 작게 한다. 먼저, 1부에서는 새로운 검파기준을 제안하여 자세히 살펴보고, 제안한 검파기준이 지니고 있는 몇 가지 흥미로운 성질을 밝히며, 결정 영역의 보기를 다룬다. 2부에서는 제안한 검파기준을 바탕으로 간섭이 충격성일 때 초광대역 다중접속 시스템에 알맞은 검파 기법을 샅펴본다.

• Journal of information and communication convergence engineering
• /
• 제7권4호
• /
• pp.556-560
• /
• 2009

We have investigated the spectral characteristics of semiconductor lasers locked to the external light injected from a modulated laser. study on FM sideband injection locking has shown that when SLs are locked to the target sidebands of the directly modulated ML, the presence of the unselected sidebands influences the resulting microwave signals. The unselected signals can produce the unwanted beat signals around the desired beat signal, which degrade the overall system performance. This analysis way to generate Giga HZ signal generation.