• Magazine of the Korean Society of Agricultural Engineers
• /
• v.37 no.1
• /
• pp.49-54
• /
• 1995

Three types of floating-type automatic inlet were developed for the purpose of reduc- ing farmer's working hours required for water management and saving irrigation water. The point of automation is to use a float within the inlet which is floated and sinked by the ponding depth of paddy field, Thus opens and closes the control gate of irrigation. Suitability of each inlet may depend on production cost, applicability to paddy field condi- tions, and feasibility to farmers, etc. The first model was composed of three parts : chamber for irrigation control gate, chamber for float controlled by ponding depth, and connection bar between the two parts. It was designed to open and close the control gate gradually as the ponding depth drops and rises to a certain level. The second model was designed to improve the weak point of the first model which is the imperfect-closing of gate when it approaches to the end of ir- rigation. A switch-spring was equipped above the connection bar for perfect opening and closing of gate when the ponding depth reaches to a certain level. The third model was designed by combining the two chambers, that is, cut in halves the inlet volume of the above two models. Magnets were equipped above the float for perfect opening and closing gate. The functional experiment for three developed inlets was successfully carried out and the rating curves were derived.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.42 no.4
• /
• pp.106-114
• /
• 2000

An investigation was conducted to get the basic data for establishing maintenance strategy of pipe framed greenhouses. The contents of the investigation consisted of actual state of structures, maintenance status, meteorological disaster, and corrosion characteristics of pipe framework in greenhouses. the number of greenhouses investigated was 108 in total. Most multi-span greenhouses had narrower width and lower height than the standared 1-2W greenhouse, and most of single-span greenhouses were tunnel type. In multi-span greenhouses, the size and interval of frameworks such as rafter, purline, column , and cross beam were mostly suitable, but frameworks of single-span greenhouses were mostly insufficient. After about 7 years in grounds, 8 years in joints, 10 years in bending parts. and 13 years in columns. pipe surface was mostly rusted. Most weak parts in corrosion were pipes in contact with the ground, joints, roll-up shaft pipes, and pipes close to the gutter. Almost all of the greenhouse farmers didn't pay any attention to maintenance affair in a regular interval for pipe framed grenhouses. Many greenhouses have experienced the meteorologicla diaster such as uplift of foundation, partial or complete failure by the hyphoon and/or high winds.

• Fire Science and Engineering
• /
• v.17 no.4
• /
• pp.64-69
• /
• 2003

Low story apartments and housings with manual fire extinguishers are very susceptible to fro damages, when people are absent or there are old and weak peoples. To reduce such fire damages, automatic fire suppression at the early stage is very important, and thus automatic and cost-effec-tiye fire extinguisher was developed. This study revealed that the reaction temperature and response time are greatly influenced by the small thickness variation of the detective parts and heating rates. The influence of the thickness of the detective parts was shown significant when the heating rate was low, The reduction in the thickness could lower the response time to 40seconds.

• The Korean Journal of Ecology
• /
• v.5 no.4
• /
• pp.176-186
• /
• 1982

Uptake and effects of treated Cd and Pb in rose moss and tomato were studied in pot cultures. Three horticulural plants on the roadside were tested to determine the contents of heavy metals in plant parts. Yields of rose moss were increased by the increase Pb concentrations in soil. Yields of rose moss by Cd treatment were decreased in 1, 000 ppm group, but increased in 500 ppm group. Portulaca grandiflora Hook. proved to be tolerent of Pb and Cd added in soil. Yields of tomato were decreased by an incrase of Pb concentration in soil, and tomato proved to be weak for Pb added in soil. Pb contents in root, stem, leaf, and flower and seed of rose moss were increased by an in crease of Pb concentration in soil Pb content in root was the highest among them. Pb content was the highest in root of tomato, but the lowest in the stem. Among the heavy metal contents metal contents of three horticultural plants collected by roadside, it was the Chrysanthemum which had the highest contents of heavy metal among them. The heavy metal contents in stem were less than in the other plnat parts in all three plants. The number of flowers in rose moss was decreased by an increase of Pb, and Cd concentration in soil, but in tomato it was increased by an increase of Pb concentration in soil. Amount of rose moss seeds which were collected after cultivation was decreased by Pb, and Cd treatment in soil.

• Proceedings of the KIEE Conference
• /
• 2003.07c
• /
• pp.1620-1622
• /
• 2003

Recently, as the technology for the development of high voltage power apparatus using SF6 gas has made remarkable progress, it became possible to develop more compact power apparatus adopting single body substation system. In these gas insulated power apparatus, it is impossible to achieve perfect and safe insulation using only SF6 gas, because some solid insulation parts should be installed to support current-carrying conductor parts for electrical and mechanical safety. When spacers were installed in SF6 gas insulation system, they were exposed to severe electrical intensification which could reduce system insulation performance and restrict the rated operating voltage So, it is necessary to clarify the dielectric characteristics of spacers by analytically and experimentally, in order to design and develop more compact and optimum gas insulated systems. In this paper, the field distribution of three-phase spacers were investigated using three dimensional electrostatic field analysis tool adopting BEM method. And the obtained results were compared to the conventional two dimensional computations. According to these three dimensional calculations, it was possible to find out weak points in the spacer more clearly and these results could be applied to design more compact and optimum three phase spacer developments.

• Conservation Science in Museum
• /
• v.11
• /
• pp.43-48
• /
• 2010

Excavated lacquer wares can be divided into waterlogged lacquer wares supersatuated with moisture and dry lacquer wares with little moisture. This conservation was done with dry damaged lacquer wares excavated from Daho-ri. Lacquer ware artifacts with lacquer fragments and no surface material remaining were processed using the three following methods. The three methods are reinforcing while sustaining three-dimensional form; reinforcing with earth after cleansing so that fragments are revealed due to weak lacquer fragments; and reinforcing the whole lacquer ware or parts by connecting and supporting missing parts with rayon paper, an artificial fiber paper, if the form cannot be sustained only with lacquer fragments.

• Geomechanics and Engineering
• /
• v.18 no.3
• /
• pp.277-289
• /
• 2019

In this study, an innovative anchoring approach has been developed dealing with all relevant aspects in consideration of previous works. An ultimate pulling force calculation of anchor is presented from a geotechnical point of view. The proposed umbrella anchor focuses not only on the friction resistance capacity, but also on the axial capacity of the composite end structure and the friction capacity occurring around the wedge. Even though the theoretical background is proposed, in-situ application requires high-level mechanical design. Hence, the required parts have been carefully improved and are composed of anchor body, anchor cap, connection brackets, cutter vanes, open-close ring, support elements and grouting system. Besides, stretcher element made of aramid fabric, interior grouting system, guide tube and cable-locking apparatus are the unique parts of this design. The production and placement steps of real sized anchors are explained in detail. Experimental results of 52 pullout tests on the weak dry soils and 12 in-situ tests inside natural soil indicate that the proposed approach is conservative and its peak pullout value is directly limited by a maximum strength of anchored soil layer if other failure possibilities are eliminated. Umbrella anchor is an alternative to conventional anchor applications used in all types of soils. It not only provides time and workmanship benefits, but also a high level of economic gain and safe design.

• Transactions of Materials Processing
• /
• v.31 no.5
• /
• pp.261-266
• /
• 2022

To reduce the weight of the vehicle, the application of the high strength steel sheets to chassis parts is increased. High forming load is induced during the shearing process of steel chassis parts made of high strength steel, and the possibility of an eccentric load is increased depending on the product seating condition on the die, which decreases the stability and lifespan of the die. In this paper, a three-dimensional finite element analysis with the continuum element was conducted using the damage theory for the cam-trimming process of the front lower arm. The structural analysis of the trimming die was performed with the forming load result obtained from the analysis, and the amount of deflection and the stress distribution of the die during the shearing process were evaluated for the confirmation of the tool stability. The shape of the weak region of the die was modified according to structural analysis and then the stability was confirmed with the finite element analysis. The analysis result showed that the possibility of tool failure during cam-trimming process was remarkably reduced, and the reliability of the proposed modified design was validated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.2
• /
• pp.609-615
• /
• 2014

Due to the recent global recession, the car industry demand levels have plummeted which led to a crisis in the automotive parts industry for the first time in history. Since the fourth quarter of 2008, the automotive parts manufacturers in America have faced a record loss and those in Japan and Europe who also had a strong track record are facing a weak economy. In addition, the domestic automotive parts industry is also affected by the global economic crisis. This research is that the relative efficiency analysis utilizing the DEA has done on the object of 25 small and medium-sized automotive parts manufacturers publicly listed, As the efficiency analysis result 6 of 25 manufacturers are efficient in CCR model and 12 manufactures have shown efficiency in BCC model, the efficiency analysis in consideration of the manufacturer size. The manufacturers with efficiency 1 in 25 manufacturers are DMU 1, 5, 7, 10, 18, 24 and the relatively benchmarking objects in other manufactures are DMU 1, 10, 24, Based on the results of this research, a direction to the domestic automotive parts manufacturers as well as a significant information will be provided in managing the companies in the future by the improvement of management efficiency through the practical efficiency analysis.

• Cross-Cultural Studies
• /
• v.38
• /
• pp.433-459
• /
• 2015

This paper aims at a better understanding of the concept of korean separable syntactic atom, of which inner parts is separable in syntax, and at examining whether or not this concept can apply to derivatives, functional complex constructions, idiomatic expressions in korean. I defined a syntactic atom as a minimum unit which is drawn directly from lexicon and then is applied to syntactic rules. And I insist that so-called 'lexical island constraint' has some problems and that the syntactic rules can be applied to inner parts of syntactic atom, if the syntactic rules is irrelevant to new syntactic atom formation. The greater part of derivatives is non-separable syntactic atoms. But the likes of '반짝거리다', '죄송스럽다', '칭얼대다' are the separable syntactic atoms. The degree of separability of them is different in the insertion of korean particles or negative adverbs and the omission of root of sytactic atom. The derivatives of 'X-적', of which roots is regular nominal roots, permit the syntactic link between roots and the syntactic combination of the root and its argument. These kinds of derivatives is separable syntactic atoms. Also the derivatives of 'bracket paradox' and 'X-답-' derivatives is separable syntactic atoms. All functional complex constructions are not separable syntactic atoms. According to the degree of grammaticalization, inner parts of some are separable, some is non-separable. Separable functional complex constructions only permit the switching of endings or Josas but not application of other syntactic rules. All idiomatic expressions which are composed of two or more syntactic atoms are separable syntactic atoms. Some of them have so strong separability to allow the insertion of syntactic atom, adverb or adnominal modification and the noun in idiomatic expression to become the head of the relative clause. And some idiomatic expressions which have weak separability only permit interrogative's substitution or form change in fraction of idiomatic expressions.