• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.170-173
• /
• 2002

The object of this study is to investigate the effect of compounded welding through the AE (Acoustic Emission) characteristics on static tensile test. This study was carried out a SM 490A, high tension steel using the low hydrogen type E4316 of electronic shield metal arc welding and compound wire of $CO_2$gas arc welding. $CO_2$welding, weak in the intensity of HAZ (Heat Affected Zone), can be improved by being combined with coated arc welding, Coated arc welding, weak in the intensity of the bead, can be improved by being combined with $CO_2$welding. Especially, electronic coated arc welding and $CO_2$welding complement the mechanical intensity of HAZ and the bead with each other. So, compounded welding increases the intensity in the special parts and enhances the quality of goods.

• 생약학회지
• /
• 제20권3호
• /
• pp.149-153
• /
• 1989

The presence of saponin, terpenoid, steroid, anthraquinone and flavonoid were screened with the usual test methods in forty five(sixty four parts) Korean plants belonging to Urticaceae, Celastraceae, Rhamnaceae, Sterculiceae and Rubiaceae. Plants were extracted with methanol and fractionated with hexane, chloroform, ethyl acetate and butanol. Each fraction was tested for the components. The result showed that in saponin test, 21 plants were positive and 11 plants were weak positive; in terpenoid and steroid test, 26 plants were strong positive; in anthraquinone test, 20 plants strong positive; in flavonoid test, 31 plants were positive and 9 plants were weak positive.

• 한국생산제조학회지
• /
• 제20권5호
• /
• pp.523-527
• /
• 2011

Polycarbonate (PC) polymer is an engineering plastic which has large tensile strength and impact resistance and is wildly used as functional parts like micro mold. Direct machining of PC materials produces lots of burrs and rough surface due to large ductility and weak heat resistance and hence it is very difficult to machine PC materials using cutting tool to make micro-parts. In this study, elliptical vibration cutting (EVC) or 2-dimensional vibration cutting was performed to minimize the size of micro V-grooves on PC material. From the experimental results, it was observed that as the cutting depth and pattern size become smaller, the better machining quality was obtained, which is attributed to the positive effect of EVC that is dependent on the ratio of vibration amplitude to cutting depth. As the height of V-groove becomes less than $1.8{\mu}m$, however, the machining quality becomes lower as the pattern size decreases.

• 자동차안전학회지
• /
• 제10권3호
• /
• pp.13-19
• /
• 2018

This research is to optimize Single-Piece Side otr reinforcement using Hot-stamping and to strengthen weak regions on Single-Piece Side otr reinforcement. As a consequence, the weight and the number of parts were reduced and resulting in improvement of impact and stiffness performance when compared to multi-piece construction.

• Applied Biological Chemistry
• /
• 제2권
• /
• pp.15-16
• /
• 1961

Distribution of $P^{32}$ in a pot-grown plant of the radish was studied by means of fertilization with phospbate labeled with $P^{32}$ followed by autoradiography of the dried parts. (1) An accumulation of $P^{32}$ occurs in the growth point, the root of hair, the younger leaves and the top of leaves in the radish similary other plants. (2) In the yellow leaves of the radish it was counted too weak by monitor. (3) $P^{32}$ absorbed by the root in radish was transported through the xylem of the radishtissue.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1996년도 제24회 추계학술대회
• /
• pp.176-182
• /
• 1996

This paper describes an empherical equation which is to predict the engine condition of the supersonic aircraft. The equation, which is a function of running time of engine and engine oil, is derived from the trend analysis of JOAP data. Qualitative analysis is carried out to make up for the weak points in the current JOAP system. Also wear debris collected from the abnormal engine is analyzed by EDS to detect the damaged parts of engine.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2009년도 특별논문집
• /
• pp.93-96
• /
• 2009

Foundation structure for the main engine heavy spare parts in the engine room is susceptible to resonance problem due to outfitting weight. In addition the deck floor has a large opening for the main engine installation and maintenance, which further weakens the foundation structure. To reinforce the weak structure, two types of approaches have been used; 1) insert an H-pillar below or above the floor and 2) increase the stiffener size. In this paper, the H-pillar approach is used to solve the vibration problem of the foundation structure in the engine room opening area. A commercial program is used to analyze the vibration problem ad to find the location and the size of the H-pillar. Modal test at the quay and on-board vibration measurement during the sea trial have confirmed the validity of inserting an H-pillar below the floor.

• 한국정밀공학회지
• /
• 제15권3호
• /
• pp.31-37
• /
• 1998

The structure of satellite consists of six parts which are control system, power system, thermal control system, remote measurement command system, propellant system and thrust system. In these parts, propellant system consists of propellant tank and thrust device. What we want to perform is optimum design to minimize the weight of propellant tank. In order to design optimal propellant tank, several parameters should be adopted from the tank geometry like the relative location of the lug and variation of the wall thickness. The analysis was executed by finite element analysis for finding optimal design parameters. The structure was divided into three parts consisting of the initial thickness zone, the transitional Bone, and the weak zone, whose effects on the pressure vessel strength was investigated. Finally the optimal lug location and the three zone thickness were obtained and the weight was compared with the uniform thickness vessel.

• 한국산학기술학회논문지
• /
• 제12권2호
• /
• pp.617-622
• /
• 2011

본 논문에서는 고소작업 차량의 플랫폼에 수직하중 조건을 주어 구조해석을 수행한다. 해석모델은 실제 크기의 1:10으로 축소한다. 붐의 각도에 따른 응력분포 및 변형량 분석을 통하여 취약부분을 파악한다. 해석결과를 보면 대부분 붐의 연결부분에서 응력이 집중되는 것을 볼 수 있다. 이러한 해석결과를 통하여 다른 부분에 비하여 상대적으로 취약한 연결부분을 보완함으로서 안전성을 증진시킨다.

• 한국지반환경공학회 논문집
• /
• 제20권10호
• /
• pp.5-14
• /
• 2019

최근 우리나라에서도 지진이 발생하여 대도시의 초고층 건물의 내진안정성에 대한 관심이 높아져 이에 대한 연구가 증가하고 있다. 또한 대부분의 내진설계 및 해석은 지반을 간접적으로 고려하고 있고, 3D 동적해석을 이용한 내진해석 연구는 미비한 실정이다. 따라서 본 연구에서는 지반을 포함한 SSI 연속체 모델에 기초한 2D 및 3D 동적해석을 수행하고 거동을 비교 분석하였다. 동적해석을 위해 지반범용해석 프로그램인 MIDAS GTS NX를 이용하여 선형시간이력해석을 수행하였다. 이를 위해 초고층 건물이 기반암 위에 시공되고 표층에 묻혀있는 것으로 가정하고, 선정된 파라미터를 기준으로 민감도 분석을 수행하였다. 동적거동은 수평변위, 층간변위비, 휨응력, 취약부를 이용하여 비교 분석하였다. 대부분의 경우, 2D 동적거동은 3D보다 크게 산출하여 더 보수적인 결과를 보였으며, 취약부의 수와 크기는 증가하는 것으로 나타났다.