• Title/Summary/Keyword: Weak Parameter

Search Result 197, Processing Time 0.026 seconds

Adaptive Sliding Mode Observer for the Control of Switched Reluctance Motors without Speed and Position Sensors (적응 슬라이딩 모드 관측기를 이용한 SRM의 속도 및 위치 센서 없는 제어)

  • Shin, Jae-Hwa;Yang Iee-Yoo;Kim, Young-Seok
    • The Transactions of the Korean Institute of Electrical Engineers B
    • /
    • v.49 no.11
    • /
    • pp.763-770
    • /
    • 2000
  • The speed and position information of the rotor are required in the speed control of SRM(Switched Reluctance Motors). This information is generally provided by shaft encoder or resolver. It is weak in the dusty, high temperature, and EMI environment. Consequntly, much attention has been given to SRM control for eliminationating the position and speed sensors. In this paper, a new estimation algorithm for the rotor position and speed for SRM drives is described. The algorithm is implemented by the sliding mode observer. The stability and robustness of the sliding observer for the parameter variations of the SRM are proved by variable structure control theory. Speed control of the SRM is accomplished by the estimated speed and position. Experiment results verify that the mode observer is able to estimate the speed and position well.

  • PDF

Low Cost Design Study of Brushless DC Motor for Electric Water Pump Application

  • Jung, Tae-Uk
    • Journal of Electrical Engineering and Technology
    • /
    • v.9 no.3
    • /
    • pp.942-949
    • /
    • 2014
  • We studied about the rotor design change using a Ferrite ring magnet to reduce material cost in the condition of the same stator core design. However, this design direction has many weak points such as the decrease of BEMF, the low maximum output, the irreversible demagnetization characteristics of a permanent magnet and so on. In order to mitigate such disadvantages, an optimization design of the BLDC motor has been developed by changing each design parameter and by improving the electromagnetic structure. In the proposed water pump SPM BLDC motor using Ferrite magnet, the outer and inner diameter of stator is fixed to the value of the conventional IPM BLDC motor using Nd-Fe-B magnet. The design specification requirements should be satisfied with the same output power and efficiency characteristics in the same dimension. As a result of this study, the design comparison results considering driving performances and material cost are represented. Through the actual experiment with the prototype of the designed motor, the simulations results are verified.

Preparation and Properties of Co$_{9-x}M_xS_8$(M = Ni, Rh, Ru, and Fe)

  • Kim, Kwan
    • Bulletin of the Korean Chemical Society
    • /
    • v.7 no.2
    • /
    • pp.102-105
    • /
    • 1986
  • Samples with the nominal composition of $Co_{9-x}M_xS_8$(M = Ni, Rh, Ru, and Fe) were prepared, and their magnetic properties were measured. X-ray diffraction analysis showed that small amount of the elements Ni, Rh, and Fe could be incorporated into $Co_9S_8$ forming a homogeneous ${\pi}$-phase, whereas the Ru-incorporated sample could not be prepared in a single phase. The lattice parameter was observed to increase as other elements were incorporated into $Co_9S_8$. Samples incorporated with the elements of Ni, Rh, and Ru showed Pauli-paramagnetism while the Fe-incorporated sample exhibited weak ferromagnetism. The values of magnetic susceptibility for the Ni, Rh, Ru-incorporated samples were nearly the same as that of pure $Co_9S_8$.

Fractional order generalized thermoelastic study in orthotropic medium of type GN-III

  • Lata, Parveen;Zakhmi, Himanshi
    • Geomechanics and Engineering
    • /
    • v.19 no.4
    • /
    • pp.295-305
    • /
    • 2019
  • The present paper is concerned with the investigation of disturbances in orthotropic thermoelastic medium by using fractional order heat conduction equation with three phase lags due to thermomechanical sources. Laplace and Fourier transform techniques are used to solve the problem. The expressions for displacement components, stress components and temperature change are derived in transformed domain and further in physical domain using numerical inversion techniques. The effect of fractional parameter based on its conductivity i.e., ($0<{\alpha}<1$ for weak, ${\alpha}=1$ for normal, $1<{\alpha}{\leq}2$ for strong conductivity) is depicted graphically on various components.

Plane harmonic waves in fractional orthotropic magneto-thermoelastic solid with rotation and two-temperature

  • Himanshi;Parveen Lata
    • Coupled systems mechanics
    • /
    • v.12 no.2
    • /
    • pp.103-125
    • /
    • 2023
  • The present research is focused on the study of plane harmonic waves in a two-dimensional orthotropic magneto-thermoelastic media with fractional order theory of generalized thermoelasticity in the light of two-temperature and rotation due to time harmonic sources. Here, we studied three types of waves namely quasi-longitudinal (QL), quasi-transverse (QTS) and quasi thermal (QT) waves. The variations in the wave properties such as phase velocity, attenuation coefficient and specific loss have been noticed with respect to frequency for the reflected waves. Further the value of amplitude ratios, energy ratios and penetration depth are computed numerically with respect to angle of incidence. The numerical simulated results are presented graphically to show the effect of fractional parameter based on its conductivity (0<α<1 for weak, α=1 for normal, 1<α≤2 for strong conductivity) on all the components.

Testing LCDM with eBOSS / SDSS

  • Keeley, Ryan E.;Shafieloo, Arman;Zhao, Gong-bo;Koo, Hanwool
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.46 no.1
    • /
    • pp.47.3-47.3
    • /
    • 2021
  • In this talk I will review recent progress that the SDSS-IV / eBOSS collaboration has made in constraining cosmology from the clustering of galaxies, quasars and the Lyman-alpha forest. The SDSS-IV / eBOSS collaboration has measured the baryon acoustic oscillation (BAO) and redshift space distortion (RSD) features in the correlation function in redshift bins from z~0.15 to z~2.33. These features constitute measurements of angular diameter distances, Hubble distances, and growth rate measurements. A number of consistency tests have been performed between the BAO and RSD datasets and additional cosmological datasets such as the Planck cosmic microwave background constraints, the Pantheon Type Ia supernova compilation, and the weak lensing results from the Dark Energy Survey. Taken together, these joint constraints all point to a broad consistency with the standard model of cosmology LCDM + GR, though they remain in tension with local measurements of the Hubble parameter.

  • PDF

Extraction and Modeling of High-Temperature Dependent Capacitance-Voltage Curve for RF MOSFETs (고온 종속 RF MOSFET 캐패시턴스-전압 곡선 추출 및 모델링)

  • Ko, Bong-Hyuk;Lee, Seong-Hearn
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.47 no.10
    • /
    • pp.1-6
    • /
    • 2010
  • In this paper, RF Capacitance-Voltage(C-V) curve of short-channel MOSFET has been extracted from the room temperature to $225^{\circ}C$ using a RF method based on measured S-parameter data, and its high-temperature dependent characteristics are empirically modeled. It is observed that the voltage shift according to the variation of temperature in the weak inversion region of RF C-V curves is lower than the threshold voltage shift, but it is confirmed that this phenomenon is unexplainable with a long-channel theoretical C-V equation. The new empirical equation is developed for high-temperature dependent modeling of short-channel MOSFET C-V curves. The accuracy of this equation is demonstrated by observing good agreements between the modeled and measured C-V data in the wide range of temperature. It is also confirmed that the channel capacitance decreases with increasing temperature at high gate voltage.

Correlation between Korean Shoulder Scoring System and Isokinetic muscle strength test (Korean Shoulder Scoring System과 Isokinetic test를 통한 근력 평가의 상관 관계)

  • Kim, Deok-Weon;Sung, Jung-Hwan;Jung, Jae-Eun;Ko, Min-Soo
    • Journal of Korean Orthopaedic Sports Medicine
    • /
    • v.9 no.2
    • /
    • pp.104-108
    • /
    • 2010
  • Purpose: To evaluate the correlation between Korean Shoulder Scoring System and Isokinetic muscle strength test for allowance of the return to unrestricted activities after rotator cuff disease treatment. Materials and Methods: This study examined 59 patients with impingement syndrome and 36 patients with rotator cuff tear. KSS and isokinetic muscle strength were analyzed and we sought to evaluate the correlation between total score or each functional parameter scores of KSS and isokinetic muscle strength deficit with Pearson's correlation test. Results: We found a weak negative correlation between and the total KSS score and the endurance test as well (r<0.346). The correlation between the manual muscle test of KSS and isokinetic strength deficits was not significant (p>0.05). Conclusion: The isokinetic muscle strength deficit had a weak correlarion between total score or the edurance test of KSS. Our results suggest that the Isokinetic muscle strength test may be needed for return to normal activity after treatment.

  • PDF

Design and Construction of the Cylindrical Slit Type Shore Structures

  • Lee, Joong-Woo;Nam, Ki-Dae;Park, Sang-Gill;Kim, Sug-Moon;Kang, Seok-Jin
    • Journal of Navigation and Port Research
    • /
    • v.33 no.9
    • /
    • pp.645-651
    • /
    • 2009
  • In this study, a series of laboratory experiments were carried out to investigate the weak reflection of regular and random water waves over a train of protruded permeable shore structures. A cylindrical slit type breakwater and the alternatives are employed and compared for reflecting and transmitting capabilities of incident waves including wave forces. A series of random waves were generated by using the Bretschneider-Mitsuyasu frequency and directional spectrum. Measured spectrum of irregular waves without breakwaters is verified by comparing with those of the input waves generated. Weak reflection is occurred at the breakwater center of the peak frequency. If the row of breakwaters is fixed at three layers and the relative height of breakwater is fixed at 0.6, around 45% of incident wave energy is reflected to offshore. It is also found that the transmission of directional random waves increases as the maximum frequency parameter increases. A very good agreement is observed. Reflection coefficients of permeable submerged breakwaters are less than those of impermeable breakwaters. The upside-down L shape is recommended for a small fishery harbor mooring in terms of reflecting capability and of practical application. The final design was applied to the wharf of a small beach of Seolly, near Namhae at the southeast coast of Korea.

Relationships between solar/interplanetary (IP) parameters and Dst index, according to IP sources

  • Ji, Eun-Young;Moon, Yong-Jae;Lee, Dong-Hun
    • Bulletin of the Korean Space Science Society
    • /
    • 2010.04a
    • /
    • pp.39.1-39.1
    • /
    • 2010
  • We have investigated interplanetary (IP) structures of 82 intense geomagnetic storms (Dst $\leq$ -100 nT) that occurred from 1998 to 2006. According to their interplanetary origins, we classified them as four groups: 20 sMC events (IP shock and MC), 19 SH events (sheath field), 12 SH+MC events (Sheath field and MC), and 8 nonMC events (non-MC type ICME). For each group, we examined the relationships between Dst index and solar/IP parameters, namely, direction parameter (DP), CME speed ($V_{CME}$), solar wind speed ($V_{SW}$), minimum of IMF $B_z$ component($Bz_{min}$), and maximum of $E_y$ component ($Ey_{max}$).We found that the relationships strongly depend on their IP source. Our main results can be summarized as follows: 1) The correlation between Dst and DP is the best for the SH+MC events (r = -0.61). 2) The relationship between Dst and $V_{CME}$ gives the best correlation for the sMC events (r = -0.56). 3) There is the best correlation between Dst and $V_{SW}$ for the sMC events (r = -0.61), while there is a very weak correlation (r=-0.17) for the SH events. 4) The relationship between Dst and $Bz_{min}$ gives the best correlation (r = -0.87) for the SH+MC events. 5) The correlation between Dst and $Ey_{max}$ is the best for the SH+MC events (r = -0.87). Summing up, the sMC and SH+MC events give us good correlations, but the SH events, weak correlations. From this study, we suggest that this tendency should be caused by the characteristics of IMF southward components, e.g., smooth field rotations for the MC events and highly IMF fluctuations for the SH events.

  • PDF