• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.2
• /
• pp.71-78
• /
• 2012

Based on the Zigbee-based wireless sensor network, I suggest the way to reduce errors between the short distance, improving the accuracy of the presumed distance by revising the deviation of RSSI(Received Signal Strength Indication) values is to estimate the distance using only the RF signal power without the additional hardware. In general, the graph measured by RSSI values shows the proximity values which are ideally reduced in proportion to the distance under the free outdoor space in which LOS(Line-Of-Sight) is guaranteed. However, if the result of the received RSSI values are each substituted to the formula, it can produce a larger margin of error and less accurate measurement since it is based upon the premise that this free space is not affected by reflected waves or obstacles caused by the ground and electronic jamming engendered by the environment. Therefore, the purpose of this study is to reduce the margin of errors between the distances and to measure the proximity values with the ideal type of graph by suggesting the way to revise the received RSSI values in the light of these reflected waves or obstacles and the electronic jamming. In conclusion, this study proves that errors are reduced by comparing the proposed deviation correction method to the revised RSSI value.

• Fashion & Textile Research Journal
• /
• v.12 no.3
• /
• pp.257-264
• /
• 2010

In the modern Society, the human's way of thinking as well as the new cultural creation has been changing by bringing on a change rapidly. The moderns are demanding humanity and the new cultural cretion through the exchange between the old things and new things by setting material before everything else. The latest trends of today had an effect on the fashion Illustration, a new art category, which gives a new image. This report of research has a purpose which expresses korean images by connecting the korean tradition style to the modern fashion. And we are concerned about the national culture and tradition with the international stream. For this reason I studied these for the purpose of expanding expression area of sewing techniques by applying to fashion Illustration expressing handcraft techniques by natural beauty improving the modern and traditional images, updating, and succeeding to tradition. As the way of studying and contents, I referred to the inside and outside of the country's literatures, these, publications, magazines, or the internet sufing. Firstly, as the theoretical study, I studied a conception and history of the fashion Illustration. I studied the theoretical background of the sewing techniques through the histories, tools, and techniques. The theoretical background of the sewing handicraft is studied through the colors, patterns, materials and sorts. I also and indicated the various works by the domestic designers.

• International Journal of Advanced Culture Technology
• /
• v.10 no.2
• /
• pp.62-68
• /
• 2022

Evaluation as learning is important for the learner competency test, and the applicable method is studied. Assessment is the role of diagnosing the current learner's status and facilitating learning through appropriate feedback. The system is insufficient to enable process-oriented evaluation in small educational institute. Focusing on becoming familiar with the AI through experience can end up simply learning how to use the tools or just playing with them rather than achieving ultimate goals of AI education. In a previous study, the experience way of AI education with PLAY model was proposed, but the assessment stage is insufficient. In this paper, we propose ELAS (Experiential K-12 AI education Learning Assessment System) for small educational institute. In order to apply the Assessment factor in in this system, the AI-factor is selected by researching the goals of the current SW education and AI education. The proposed system consists of 4 modules as Assessment-factor agent, Self-assessment agent, Question-bank agent and Assessment -analysis agent. Self-assessment learning is a powerful mechanism for improving learning for students. ELAS is extended with the experiential way of AI education model of previous study, and the teacher designs the assessment through the ELAS system. ELAS enables teachers of small institutes to automate analysis and manage data accumulation following their learning purpose. With this, it is possible to adjust the learning difficulty in curriculum design to make better for your purpose.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.5
• /
• pp.185-212
• /
• 2005

The ultimate objectives of the six sigma activities are to raise quality of products to the level where customers can be satisfied and to improve marketing efficiency through cost reduction. Recently, many businesses have been struggling to find out the most successful way to implement the six sigma to produce better results. This study is significant in a way that it provides readers with an actual evidence of efficiency and effectiveness of six sigma activities in marketing performance for the first time. The major data of this study can be divided into two categories ; First, secondary data research method was utilized to find out the effects of six sigma management on the quality and marketing performances, theoretically and empirically. Second, test of established hypotheses relevant to the effects of six sigma management on the quality and marketing performance based on the propositions drawn from existing literatures, and test hypotheses statistically. This study of six sigma looked into benefits in manufacturing industry in terms of improving quality, cutting cost and decreasing defection product-defect rate. In addition, the study has verified that how the quality performances can affect the marketing performances, such as enhancing corporate image, sales increase and customer satisfaction. The author believes that this study will help many businesses acquire best methods to increase sales and profits. And, business manager will be able to understand where to focus as they proceed with the six sigma project and improve corporate competitiveness.

• Proceedings of the KOR-KST Conference
• /
• 1996.02a
• /
• pp.59-86
• /
• 1996

Current methods for evaluating unsignalized intersections, and estimating level-of-service (LOS) is determined from efficiency-based criteria such as little or no delay to very long delays. At present, similar procedures to evaluate intersections using safety-based criteria do not exist. The improvement of sight distances at intersections is the most effective way of improving intersection safety. However, a set of procedures is necessary to account for the limitations in current methodology. Such an approach would build upon such methods, but also account for: deficiencies in the current deterministic solution for the determination of intersection sight distances; opportunity for an accident and severity of an accident; and cost-effectiveness of attaining various levels of sight distances. In this research, a model that estimates the degree of safety at two-way stop-controlled intersections is described. Only crossing maneuvers are considered in this study because accidents caused by the crossing maneuvers are the dominate type among intersection accidents. Monte Carlo methods are used to estimate the hazard at an intersection as a function of roadway features and traffic conditions. Driver`s minimum gap acceptance in the crossing vehicles and headway distribution on the major road are used in the crossing vehicles and headway distribution on the major road are used in the model to simulate the real intersectional maneuvers. Other random variables addressed in the model are: traffic speeds; preception-reaction times of both drivers in the crossing vehicles and drivers in oncoming vehicles on the major road; and vehicles on the major roads. The developed model produces the total number of conflicts per year per vehicle and total potential kinetic energy per year per vehicle dissipated during conflicts as measurements of safety at intersections. Based on the results from the developed simulation model, desirable sight distances for various speeds were determined as 350 feet, 450 feet and 550 feet for 40 mph, 50 mph and 60 mph prevailing speed on the major road, respectively. These values are seven to eight percent less than those values recommended by AASHTO. A safety based level-of-service (LOS) is also developed using the results of the simulation model. When the total number of conflicts per vehicle is less than 0.05 at an intersection, the LOS of the intersection is `A' and when the total number of conflicts per vehicle is larger than 0.25 at an intersection, the LOS is `F'. Similarly, when the total hazard per vehicle is less than 350, 000 1b-ft2/sec2, the LOS is `F'. Once evaluation of the current safety at the intersection is complete, a sensitivity analysis can be done by changing one or more input parameters. This will estimate the benefit in terms of time and budget of hazard reduction based upon improving geometric and traffic characteristics at the intersection. This method will also enable traffic engineers in local governments to generate a priority list of intersection improvement projects.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.4 no.3
• /
• pp.102-111
• /
• 1996

For the air-fuel ratio control in a fuel injection SI engine, the Jump-Ramp control algorithm has been widely adopted by using the on/off type oxygen sensor. But the Jump-Ramp control method has limitation on treating the frequency and amplitude of the air-fuel ratio oscillation. This study suggests another feedback control logic named modulated fuel feedback control, which has a concept of pre-tuned air-fuel ratio oscillation. In the modulation method, the oxygen sensor output is not treated as on/off signal but as analog signal for feedback. By using the modulation method, the frequency and the amplitude of air-fuel ratio oscillation can be adjustable to some extent for improving the conversion efficiency of the Three-Way Catalyst. The result shows that the performance of the modulation method is better than that Jump-Ramp control method in reducing the amplitude of the air-fuel ratio oscillation as well as in increasing the frequency of the air-fuel ratio oscillation.

• Research in Community and Public Health Nursing
• /
• v.7 no.1
• /
• pp.18-28
• /
• 1996

This study was carried out to explore the direction of job involvement of public health nurses and explore the way for improving services of public health center in Korea. The subjects were consisted of 164 nurses who were working at public health centers in Chonbuk. The data were collected by self-reporting questionnaire from Jan. 15 to Jan. 27, 1996. The instrument used in this study was Likert-type scale which Job Involvement Scale developed by Kanungo. The questionnaires of organizational and job characteristic were made through reviewing literatures. The data were analyzed by frequency, percentage, t-test, one-way ANOVA, Scheffe test, and Pearson's correlation coefficient with SPSSPC+ program. Major findings were as follows : 1. Mean scores for job involvement were 3.0879 on a 5 point scale. 2. In the personal variables, professional experience(t=-2.18, p=.031), position(t=2.34, p=.021), and age(F=-1.94, p=.038) were statistically significant in job involvement. 3. The variables to job characteristic were statistically significant in job involvement: job challenge (r=.4785, p=.000), role ambiguity (r=-.3141, p=.000), task significance (r=.2714, p=.000), and role conflict(r=-.2166, p=.003). 4. The variables to organizational characteristic were statistically significant in job involvement : formalization(r=.3184, p=.000) and human centered organizational characteristic (r=.2450, p=.001).

• Computers and Concrete
• /
• v.34 no.1
• /
• pp.123-135
• /
• 2024

Strain-hardening cement-based composites (SHCC) under cracked condition exhibits remarkable capillary absorption due to water ingress from multiple cracks. Surface treatment using water repellent agents is an effective way for improving water resistance of SHCC, but the water resistance may remarkably decrease when cracks penetrate impregnation depth. Another way is to add water repellent agents directly into the mixture, offering SHCC integral water repellency even if cracks form later. However, although integral water repellent treatment has been proved feasible by previous studies, there is still lack of simulation work on the treated SHCC for evaluating its durability. This study presents a simulation method for capillary absorption of cracked SHCC with integral treatment based on a multi-scale approach proposed in the authors' previous work. The approach deals with water flows in bulk matrix and multiple cracks using two individual transport equations, respectively, whereas water absorbed from a crack to its adjacent matrix is treated as the mass exchange of the two equations. In this study, the approach is enhanced for the treated SHCC by integrating the influencing of water repellency into the two transport equations as well as the mass exchange term. Using the enhanced approach, capillary absorption of water repellent SHCC under cracked condition is simulated, showing much more reduced water ingress than the untreated concrete, which is consistent with total absorption data from previous tests. This approach is also capable of simulating water spatial distribution with time in treated SHCC reasonably.

• International Journal of Contents
• /
• v.8 no.2
• /
• pp.52-59
• /
• 2012

This study uses digital imaging and communications in medicine (DICOM) files acquired after CT scan to obtain the absorbed dose distribution inside the body by using the patient's actual anatomical data; uses geometry and tracking (Geant)4 as a way to obtain the accurate absorbed dose distribution inside the body. This method is easier to establish the radioprotection plan through estimating the absorbed dose distribution inside the body compared to the evaluation of absorbed dose using thermo-luminescence dosimeter (TLD) with inferior reliability and accuracy because many variables act on result values with respect to the evaluation of the patient's absorbed dose distribution in diagnostic imaging and the evaluation of absorbed dose using phantom; can contribute to improving reliability accuracy and reproducibility; it makes significance in that it can implement the actual patient's absorbed dose distribution, not just mere estimation using mathematical phantom or humanoid phantom. When comparing the absorbed dose in polymethly methacrylate (PMMA) phantom measured in metal oxide semiconductor field effect transistor (MOSFET) dosimeter for verification of Geant4 and the result of Geant4 simulation, there was $0.46{\pm}4.69%$ ($15{\times}15cm^2$), and $-0.75{\pm}5.19%$ ($20{\times}20cm^2$) difference according to the depth. This study, through the simulation by means of Geant4, suggests a new way to calculate the actual dose of radiation exposure of patients through DICOM interface.

• Journal of the Korean housing association
• /
• v.16 no.6
• /
• pp.73-82
• /
• 2005

This study attempts to find out more efficient way of improving the housing conditions, by reviewing the existing improvement programs for the traditional rural housing and by aiming at finding advantages to inherit and correcting the inconvenience of the traditional forms of housing, through a survey on the housing conditions of the aged living alone and living with spouse only in the traditional rural housing. Research result shows that the openness and buffering zone of the traditional rural housing are relevant housing elements which provide the aged appropriate living space and therefore should be actively inherited and that the existing improvement programs have been largely inappropriate. But as the aged can hardly practice the appropriate way of improvement on their own, government policy consideration is urgently needed as part of the welfare policy for the aged.