• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2004.05a
• /
• pp.257-262
• /
• 2004

A series of preliminary model tests are performed to find out the wave attenuating effect of the pneumatic breakwater of environment friendly type, which is a bubble screen generated by releasing compressed air from a submerged multiple parallel manifold Rising bubbles induce vertical current, which produces horizontal currents flowing away from the bubble-screen area in both directions. Near bottom, the corresponding currents flow toward the bubble screen, thus completing the circulation pattern. The surface current moving against the direction of wave propagation causes some attenuation of the waves. It becomes more effective as the relative depth (d/ L) increases (short-period waves in deep water). With the same air-discharge, the multiple parallel manifold can be more effective for the attenuation of longer waves through optimum arrangement of manifold number. installation depth, manifold gap, etc. The pneumatic breakwater will give a wide utilization as a device for protecting harbor facilities and as a simple, mobile breakwater.

• Structural Engineering and Mechanics
• /
• v.82 no.4
• /
• pp.491-502
• /
• 2022

A model experiment with a scale of 1:150 has been conducted to investigate the dynamic responses of a freestanding four-column bridge tower subjected to regular wave, random wave and coupled wave-current actions. The base shear forces of the caisson foundation and the dynamic behaviors of the superstructure were measured and analyzed. The comparisons of the test values with the theoretical values shows that wave-induced base shear forces on the bridge caisson foundation can be approximated by using a wave force calculation method in which the structure is assumed to be fixed and rigid. Although the mean square errors of the base shear forces excited by joint random wave and current actions are approximately equal to those excited by pure random waves, the existence of a forward current increases the forward base shear forces and decreases the backward base shear forces. The tower top displacements excited by wave-currents are similar to those excited by waves, suggesting that a current does not significantly affect the dynamic responses of the superstructure of the bridge tower. The experiment results can be used as a reference for similar engineering design.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.4
• /
• pp.14-19
• /
• 2001

In this paper, the wave and current forces acting on cylinders are investigated by theoretical and experimental methods. The models used are one-cylinder, four-cylinder and semi-submersible types. The theoretical investigations are carried out by the Morison equation and three dimensional source distribution method to calculate exciting forces in waves with and without currents. The experimental investigations are carried out in the wave tank which can generate currents in both directions. In these tests, the models have been exposed to the regular waves with and without currents. It is shown that the exciting forces acting on the one-cylinder or four-cylinders can be approximately estimated by the Morison equation and also by the diffraction theory. However, the Morison equation seems to be not appropriate to estimate the exciting forces on the present type of semi-submersible.

• Journal of Korean Port Research
• /
• v.12 no.2
• /
• pp.281-290
• /
• 1998

The propagation of water waves over irregular bottom bathymetry and around islands involves many process-shoaling, refraction, energy dissipation and diffraction. Numerical model in this study is developed with the mild slope equation to investigate wave transformation in water of varying depth and combined waves and a current. The method used is splitting method and minimax approximation. The numerical method used in this study is Crank-Nicolson scheme in the FDM. This model is applied to Vincent shoal and compared with laboratory experimental data. The results agreed well with laboratory data. Current effect is considered in this study. This model can be used for the estimation of rip current in the slowly varying topography.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.805-808
• /
• 2005

We constructed an eddy current tester as education programs of electronics and computers. The tester is designed based on frequency counting of square-waves digitally, where information of phase is lost, but which is very compact. Main controller of the tester is PIC16HC84A. Other parts, detection-coils, oscillators, and stabilizers are made by us. The tester is able to detect change of order(-5) in waves of 1MHz, whose function is kept in several minutes. The measurement period is 10-20 msec in the several minutes. Using the tester, we observed narrow gaps of copper/aluminum wires, and detected resistivity difference of 1.7 or 2.7 [$10^{-8}$ $ohm^{\ast}m$].

• Geomechanics and Engineering
• /
• v.10 no.4
• /
• pp.387-403
• /
• 2016

In this paper, an integrated model for the wave (current)-induced seabed response is presented. The present model consists of two parts: hydrodynamic model for wave-current interactions and poro-elastic seabed model for pore accumulations. In the wave-current model, based on the fifth-order wave theory, ocean waves were generated by adding a source function into the mass conservation equation. Then, currents were simulated through imposing a steady inlet velocity on one domain and pressure outlet on the other side. In addition, both of the Reynolds-Averaged Navier-Stokers (RANS) Equations and $k-{\varepsilon}$ turbulence model would be applied in the fluid field. Once the wave pressures on the seabed calculated through the wave-current interaction model, it would be applied to be boundary conditions on the seabed model. In the seabed model, the poro-elastic theory would be imposed to simulate the seabed soil response. After comparing with the experimental data, the effect of currents on the seabed response would be examined by emphasize on the residual mechanisms of the pore pressure inside the soil. The build-up of the pore water pressure and the resulted liquefaction phenomenon will be fully investigated. A parametric study will also be conducted to examine the effects of waves and currents as well as soil properties on the pore pressure accumulation.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.11a
• /
• pp.37-42
• /
• 2003

We have analyzed the characteristics of the sea surface winds and wind waves near the Korean marginal seas on the basis of prediction results of the sea surface winds from MM5/KMA model, which is being used for the operation system at the Korea Meteorological observation buoy data to verify the model results during Typhoon events. The correlation coefficients between the models and observation data reach up to about 95％, supporting that these models satisfactorily simulate the sea surface winds and wave heights even at the coastal regions. Based on these verification results, we have carried out numerical experiments about the wave modulation. When there exist an opposite strong current for the propagation direction of the waves or wind direction, wave height and length gets higher and shorter, and vice versa. It is proved that these modulations of wave parameters are well generated when wind speed is relatively week.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.3 no.1
• /
• pp.54-64
• /
• 1991

To accurately estimate the rate of sediment transport in shallow water bodies, it is necessary to investigate the irregular waves transformation characteristics and nearshore currents produced by random sea waves. Most of studies on numerical models for nearshore currents are based on the theory of monocromatic waves and thus, very few nearshore models take into account the effect of irregularities in the hight, period and directional spreading of incident waves. The numerical simulation model for nearshore currents used in this paper considers the effect of irregularities of incident waves, based on Individual Wave Analysis. The computational results are compared and shown in a reasionable agreement with the experimental data.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.5
• /
• pp.18-22
• /
• 1989

We calculate the distribution of the induced current on the strip by the TE waves on the infinite conducting strip. The boundary equations represented as the spatial domain function becomevery complicated equations including convolution integral. As we transform it to the spectral domain, we have a very simple equation expressed by some algebraic multiplication of the current density function and Green's function. It is shown that the computation result of the induced current distribution gives the optimum value, when the stop condition of iteration presented in this paper are satisfied.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.5
• /
• pp.437-443
• /
• 1988

We calculate the distribution of the current on the strip by the incident waves on the infinite conducting strip line. The boundary equations represented as the spatial domain function become very complicated equations including convolution integral. Transformed it to the spectral domain, we have a very simple equation is composed by some algebraic multiplication of the current density function and Green's function. the acceleration of iteration procedure is achieved by Kastner's method. The result of iteration gives us the optimum value when it satisfies the iteration stop condition presented in this paper. We confirmed that the induced current density distribution on the stripline has been changed as variaties of the width.