• 전자공학회논문지SC
• /
• 제44권6호
• /
• pp.21-28
• /
• 2007

Mutiresolution proportional-integral-derivative(MRPID) 제어기는 웨이브렛 기반의 다해상도 응답을 이용해서 에러 신호에 포함되어 있는 잡음과 외란을 제거하는 필터 역할을 해준다. 다해상도 응답의 특징상 샘플링 주파수가 높을 경우 상대적으로 고주파성분이 남아있음으로 인해 응답속도가 떨어지는 대신에 오버슈트가 제거되고, 낮을 경우 신호 성분이 제거되므로 인해 응답속도가 향상되지만 오버슈트가 증가 되는 결과를 보였다. 본 논문에서는 proportional-integral-derivative(PID) 제어기와 MRPID 제어기의 응답을 이용한 샘플링 주파수를 설정하는 기법과, MRPID 제어기의 특성을 고려한 파라미터 설정기법을 제안한다. 모의실험을 통해서 제안된 기법의 타당성을 검증하였다.

• 한국자동차공학회논문집
• /
• 제18권5호
• /
• pp.37-44
• /
• 2010

Impact noise is induced in a car when it is driven on a harsh road or over some bumps. This noise occurs with the very high level of sound, which affects passengers in some way or other. Although it is impossible to clearly remove such noise, it is necessary to research an improvement in sound quality for impact noise. A new sound metric for impact sound is presented. This metric is verified by comparison between mean subjective ratings and several sound metrics. In this paper, more objective attributes are considered, which the attributes are expressing the level and modulation of sound. Three sound metrics are employed to get impact sound indexes for each course by the method of multiple linear regressions. The indexes are verified by considering the correlation between the estimated values from the multiple linear regressions and the mean subjective ratings by evaluators. Also, the subjective ratings on the indexes are estimated for the case in which some parts of suspension system are changed. The estimated ratings represent more reasonable or acceptable ratings. Thus, such indexes can be used for modification of the parts of suspension system under considering a good sound quality.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2006년도 춘계학술발표회 논문집
• /
• pp.187-192
• /
• 2006

Image fusion techniques are widely used to integrate a lower spatial resolution multispectral image with a higher spatial resolution panchromatic image. However, the existing techniques either cannot avoid distorting the image spectral properties or involve complicated and time-consuming decomposition and reconstruction processing in the case of wavelet transform-based fusion. In this study a simple spectral preserve fusion technique: the Smoothing Filter-based Replacement(SFR) is proposed based on a simplified solar radiation and land surface reflection model. By using a ratio between a higher resolution image and its low pass filtered (with a smoothing filter) image, spatial details can be injected to a co-registered lower resolution multispectral image minimizing its spectral properties and contrast. The technique can be applied to improve spatial resolution for either colour composites or individual bands. The fidelity to spectral property and the spatial quality of SFM are convincingly demonstrated by an image fusion experiment using IKONOS panchromatic and multispectral images. The visual evaluation and statistical analysis compared with other image fusion techniques confirmed that SFR is a better fusion technique for preserving spectral information.

• Journal of Astronomy and Space Sciences
• /
• 제28권2호
• /
• pp.103-108
• /
• 2011

The latitudinal variation of sunspots appearing during the period from 1874 to 2009 has been studied in terms of centerof-latitude (COL). The butterfly diagram has been used to study the evolution of the magnetic field and the dynamics at the bottom of the solar convection zone. Short-term periodicities have been of particular interest, in that they are somehow related to the structure and dynamics of the solar interior. We thus have focused our investigation on shortterm periodicities. We first calculated COL by averaging the latitude of sunspots with the weight function in area. Then, we analyzed the time series of COL using the wavelet transform technique. We found that a periodicity of ~5 years is the most dominant feature in the time series of COL, with the exception of the ~11 year solar cycle itself. This periodicity can be easily understood by considering small humps between the minima in the area-weighted butterfly diagram. However, we find that periodicities of ~1.3 (0.064), ~1.5 (0.056), or ~1.8 (0.046) years ($\frac{1}{month}$), month ), which have been previously suggested as evidence of links between the changing structure of the sunspot zone and the tachocline rotation rate oscillations, are insignificant and inconsistent. We therefore conclude that the only existing short-term periodicity is of ~5 years, and that periodicities of ~1.3, ~1.5, or ~1.8 years are likely to be artifacts due to random noise of small sunspots.

• 한국정보통신학회논문지
• /
• 제15권1호
• /
• pp.241-248
• /
• 2011

본 논문에서는 핵연료 교환기 헤드를 제어하는 진단시스템을 설계하고 구현하였다. 제안하는 핵연료 교환기 진단시스템은 신호 수집 시스템, 진단 알고리즘, 고장 시뮬레이터의 세 부분으로 구성된다. 핵연료 교환기를 직접 사용하는 실험은 원전 운영상 불가능하여 본 연구에서는 고장 시뮬레이터로 베어링 이상 상태를 생성시키고 FFT 및 웨이블릿 변환을 이용하여 고장 진단 실험을 수행하였다. 베어링 볼 이상 상태 진동 분석과 베어링 내륜 이상 상태 진동 분석을 통해 이론값과 실험값이 거의 일치함을 확인하였다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.2254-2257
• /
• 2008

홍수와 가뭄, 수질오염 등의 피해에 대한 대책과 보다 효율적인 수자원 관리를 위해서 원자료에 대한 분석이 선행되어야 한다. 따라서 본 연구에서는 나주지점을 대상으로 하여 총유기탄소(Total Organic Carbon: TOC) 자료와 유출량 자료를 수집하였으며, 각 자료에 대하여 상세한 주기성분을 파악하기 위하여 웨이블렛 변환을 적용하였다. 대상지점으로 선정한 나주지점은 전라남도 나주시 나주대교 상류에 위치하고 있으며, 유역면적이 $2,0587.2km^2$이며, 유로 연장은 65.5km이다. 유출량과 수질자료의 주기성 분석을 위해 유기물의 양을 나타내는 수질지표인 TOC와 나주수위관측소에서 관측된 2003년${\sim}$2004년의 시수위자료를 유출량으로 환산한 값을 사용하였으며, 이 자료의 상세한 주기성 파악을 위해 웨이블렛 변환을 사용하였다. 일반적으로 주기성을 파악하기 위하여 푸리에 변환을 사용하지만, 푸리에 변환은 시간정보와 주파수를 동시에 파악할 수 없을 뿐만 아니라, 자료에 불연속성과 고주파수 성분이 포함될 경우 분석이 난이하다. 이러한 푸리에 변환의 단점을 보안한 것이 웨이블렛 변환이며, 푸리에 변환보다 계산속도가 빠르다. 또한 주어진 자료에 대하여 시간과 주파수 영역에서 동시에 파악하는 것이 가능하며, 불규칙한 자료를 평탄하게 함으로서 보다 상세한 주기성을 찾아낼 수 있다. 따라서 본 연구에서 추출한 각 자료의 상세 주기성분들은 향후 수자원 관리를 위한 기초자료로 활용될 수 있을 것으로 기대된다.

• Journal of Communications and Networks
• /
• 제12권2호
• /
• pp.168-173
• /
• 2010

Error concealment techniques are significant due to the growing interest in imagery transmission over error-prone channels. This paper presents a spatial error concealment technique for losslessly compressed images using least significant bit (LSB)-based data hiding to reconstruct a close approximation after the loss of image blocks during image transmission. Before transmission, block description information (BDI) is generated by applying quantization following discrete wavelet transform. This is then embedded into the LSB plane of the original image itself at the encoder. At the decoder, this BDI is used to conceal blocks that may have been dropped during the transmission. Although the original image is modified slightly by the message embedding process, no perceptible artifacts are introduced and the visual quality is sufficient for analysis and diagnosis. In comparisons with previous methods at various loss rates, the proposed technique is shown to be promising due to its good performance in the case of a loss of isolated and continuous blocks.

• 한국기계가공학회지
• /
• 제7권2호
• /
• pp.72-77
• /
• 2008

In this study, we propose and develop PDMS-based modular actuators. The microactuator which looks like a small insect uses thermal expansion power of the PDMS (polydimethylsiloxane; $sylgar^{(R)}$ 184 silicone elastomer). The PDMS-based microactuator provides a large displacement due to a high thermal expansion coefficient (approximately 310ppm). The microacruator with 1mm length $350{\mu}m$ width is optimized by using a numerical analysis. The shape of the PDMS actuatoris variously designed. They are placed at several positions to find the optimal position that provides a high transformation ratio. The PDMS-based microactuators are fabricated using a conventional micromaching technique. The fabricated microactuator is heated using a hot-plate. The actuator displacement is measured as a function of temperature from $27^{\circ}C$ to $300^{\circ}C$. The experimental results are compared to the simulation result. When heating temperature up to $300^{\circ}C$ is applied to the PDMS actuator, each V-groove-shaped joint is actuated $30{\mu}$ mat $300^{\circ}C$. Anotherdesign of the microactuator has a maximum displacement of about 656mm.

• 대한원격탐사학회지
• /
• 제27권3호
• /
• pp.359-367
• /
• 2011

A suitable pan-sharpening method has to be chosen with respect to the used spectral characteristic of the multispectral bands and the intended application. The research on pan-sharpening algorithm in improving the accuracy of image classification has been reported. For a classification, preserving the spectral information is important. Other applications such as road detection depend on a sharp and detailed display of the scene. Various criteria applied to scenes with different characteristics should be used to compare the pan-sharpening methods. The pan-sharpening methods in our research comprise rather common techniques like Brovey, IHS(Intensity Hue Saturation) transform, and PCA(Principal Component Analysis), and more complex approaches, including wavelet transformation. The extraction of matching pairs was performed through SIFT descriptor and Canny edge detector. The experiments showed that pan-sharpening techniques for spatial enhancement were effective for extracting point and linear features. As a result of the validation it clearly emphasized that a suitable pan-sharpening method has to be chosen with respect to the used spectral characteristic of the multispectral bands and the intended application. In future it is necessary to design hybrid pan-sharpening for the updating of features and land-use class of a map.

• 한국소음진동공학회논문집
• /
• 제16권1호
• /
• pp.27-33
• /
• 2006

Fault diagnosis and condition monitoring for rotating machines are important for efficiency and accident prevention. The process of fault diagnosis is to extract the feature of signals and to classify each state. Conventionally, fault diagnosis has been developed by combining signal processing techniques for spectral analysis and pattern recognition, however these methods are not able to diagnose correctly for certain rotating machines and some faulty phenomena. In this paper, we add a minimum detection error algorithm to the previous method to reduce detection error rate. Vibration signals of the induction motor are measured and divided into subband signals. Each subband signal is processed to obtain the RMS, standard deviation and the statistic data for constructing the feature extraction vectors. We make a study of the fault diagnosis system that the feature extraction vectors are applied to K-means clustering algorithm and minimum detection error algorithm.