• 산업기술연구
• /
• 제16권
• /
• pp.147-155
• /
• 1996

There is a considerable interest in tunable DFB-LD for their use in OFDM and coherent optical communications. In this paper, A modeling of ${\lambda}/4$-shifted tunable wavelength three electrode DFB-LD was performed considering the spatial hole burning within a laser diode cavity. The modeling will show design paramenters' requirement for high-speed and broad bandwidth lasers. The simulations of modeling prove that the continuous tuning range is about 3nm and the SMSR is about several dB. We showed that the optical power and carrier density distribution along z for several dc current with SHB. It was shown that prove that optical power and carrier density along cavity are changed and thismeans that modeling is correct.

• 제어로봇시스템학회논문지
• /
• 제16권11호
• /
• pp.1096-1103
• /
• 2010

This paper proposes CDC (Continuous Damping Control) algorithm and verifies in multi-body dynamic vehicle. In order to distinguish a road profile on driving, waviness calculated by the filtered vertical-accelerations of sprung and unsprung masses is introduced. Sky-hook control is used at a low waviness road and constant damping level control is used at a high waviness road, where the hard damping level is determined by waviness, roll rate, acceleration, and deceleration. The damping levels of ride, anti-roll, anti-squat, and anti-dive modules are calculated by tuning parameters which is dependent upon vehicle velocity. Therefore this high tunable algorithm is useful to improve the ride and handling performance under various driving conditions. In the simulations, tire and dampers are modelled by SWIFT (Short Wavelength Intermediate Frequency Tire) model and 1st order delay model, and results are compared with conventional damper's.

• 전자공학회논문지A
• /
• 제32A권9호
• /
• pp.1184-1201
• /
• 1995

Two multiple access protocols are proposed for a multichannel WDM optical fibre local area network or metropolitan area network in which users are interconnected using a passive star topology. Each user has a single tunable transmitter and a single tunable receiver. A transmitter sends a control packet before its data packet transmission so that its intended receivers can tune to the proper data channel wavelength. The maximum throughput of the proposed protocols are independent of the effective normalized propagation delay which may include the transmitter and receiver tuning times and the processing delays. The maximum throughputs of the protocols are analyzed and compared with those of the existing ones by numerical examples. The message delay of the R- Aloha/synchronous N-server switch protocol which is suitable for the queued users is also analyzed.

• 대한전자공학회논문지SD
• /
• 제41권4호
• /
• pp.49-55
• /
• 2004

본 논문은 고밀도 파장분할다중 (DWDM) 시스템의 응용을 위하여 quaternary/quaternary 다중양자우물 InGaAsP/InGaAsP QCSE 튜닝을 이용한 1550 ㎚ 다중 채널원에 관한 것이다. 본 채널 소스는 140 ㎓ 채널 간격을 갖으며 32 ㎚ 채널 선택 대역을 갖는다.

• 한국광학회지
• /
• 제15권4호
• /
• pp.369-374
• /
• 2004

본 논문에서는 새로운 구조의 파장가변 레이저 다이오드를 제안하였다. 제안된 레이저 다이오드는 추출격자 분포궤환 레이저 다이오드와 추출격자 분포 브래그 반사기가 집적된 구조로 되어 있다. 제안된 레이저 다이오드는 특정한 구조에서 27 nm정도의 광대역 파장가변이 가능함을 수치해석을 통해 확인하였다. 또한 이득영역에서 생성된 광파를 다른 수동영역을 거치지 않고 직접 광섬유에 결합시킬 수 있는 구조로 광효율이 기존의 레이저 다이오드에 비해 우수함을 확인하였다.

• 한국광학회지
• /
• 제14권1호
• /
• pp.8-11
• /
• 2003

기계적으로 유도된 소자형 장주기 광섬유격자를 처음으로 제작해 보았다. 본 연구의 장주기 광섬유격자 소자는 제작이 용이하며. 다른 광 소자나 시스템에 적용 또는 장착이 가능하다는 장점을 가지고 있다. 또한, 제작된 장주기 광섬유격자 소자는 격자 제작시 중심파장과 투과손실을 가변할 수 있는 특징을 가지고 있다. 장주기 광섬유격자 소자의 제작원리를 살펴보고, 제작된 장주기 광섬유격자의 파장가변 특성과 압력에 따른 투과특성을 실험해 보았으며, 장주기 광섬유격자 소자를 EDFA의 이득 평탄화 실험에 적용해 보았다.

• 산업기술연구
• /
• 제15권
• /
• pp.123-135
• /
• 1995

In this paper, we performed the modeling of a tunable three section DFB-LD with continuous phase using the coupled-wave equation. It was also proposed new modeling method for ${\lambda}/4$ phase shifted one. We got the characteristics of oscillation wavelength, gain, and photon density profiles according to parameters such as coupling coefficient K and current into the third sections for two case of continuous phase and ${\lambda}/4$ shifted phase one. The simulations for ${\lambda}/4$ phase shifted tunable three section DFB-LD prove that the continuous tuning range is about 4.2nm for $K=120cm^{-1}$, $L=180{\mu}m$, and the oscillation mode be within the stop-bands. Also when changed a current of both end sections, it is shown that a photon density reaches the maximum at the center.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 춘계학술대회 논문집
• /
• pp.383-386
• /
• 2008

We developed a fiber-optic Bragg grating sensor system using a SOA fiber laser for over heat detection in power systems. To compensate the nonlinear wavelength tuning of the fiber laser, we used fixed passband wavelengths from Fabry-Perot ITU filter as reference wavelengths. Gaussian line-fitting algorithm was also used to reduce the FBG peak detection error. Compared with a highest-peak-detection and a polynomial-fitting method, the proposed Gaussian fitting algorithm could drastically reduce the measurement errors. Also the SOA fiber laser made it possible to enhance the signal-to-noise-ratio even with several kilometers of lead fiber.

• 분석과학
• /
• 제8권4호
• /
• pp.1101-1108
• /
• 1995

Acousto-optic tunable filter is a compact, all solid state electronic dispersive device. It is based on the acousto-optic interaction in an anisotropic crystal. Compared to conventional grating monochromators. the AOTF has no moving parts, wider spectral tuning range (from UV through visible and near-IR to IR), higher throughput, higher resolution, faster scanning (${\mu}s$) and random wavelength access. These features make it possible to use the filter to develop novel instruments which are not possible otherwise. The instrument development and unique advantages of such AOTF based instruments including the multidimensional fluorimeter, the multiwavelength thermal lens spectrometer, and the detectors for HPLC and flow injection analysis are described.

• ETRI Journal
• /
• 제28권5호
• /
• pp.545-554
• /
• 2006

A widely tunable multi-channel grating cavity laser is proposed and experimentally demonstrated. The device is implemented in Littman configuration with an echelle grating based on Rowland circle construction and realized by monolithically integrating all elements in an InP substrate. Lasing wavelength is selected by turning on an amplifier and the appropriate channel element in the array, and it is tuned by controlling light deflection electrically. The 6-channel device exhibits a tuning range of about 50 nm with a side mode suppression ratio of more than 30 dB. This is accomplished by adjusting the applied current of the dispersive element and phase control section.