• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.05a
• /
• pp.114-117
• /
• 1996

The wavelength selectivity in grating-assisted optical waveguide couplers is studied using a matrix method to analyse optical filter characteristics. The matrix method is extended to both 2-system modes and all guided system modes. The influence of fundamental design parameters on the performances of the optical filters by waveguide couplers is discussed.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.6
• /
• pp.54-62
• /
• 1998

The crosstalks of two-waveguide & three-waveguide directional couplers are analyzed. Advantages and disadvantages for each coupler are compared and discussed. Based on the relationship between the coupled mode and the normal mode, the mathematical expressions are derived in terms of the crosstalks for each directional coupler. Numerical techniques such as the finite-difference method and the beam propagation method are employed to testify the validity of the derived equations. The calculation results show that two-waveguide directional coupler is superior to any types of three-waveguide couplers from the practical viewpoint of the crosstalk and the coupling length.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.4
• /
• pp.62-72
• /
• 1997

The optical power splitter/couplers based on MMI(multimode interference) in GaAs/AlGaAs are studied. We presetn a design of optical power splitter/couplers, which have deeply etched multimode waveguide. The properties and fabrication tolerance on the etching depth, multimode waveguide width are simulatedusing a FD-BPM (finite difference beam propgation method). Proposed 1*N optical of designed device is 0.7dB smaller than the optical power splitter with a shallowly etched MMI section. For 0.5dB excess loss, the predicted fabrication tolerance is 0.6.mu.m on the multimode waveguide width of the 14 optical power splitter with a deeply etched MMI section. Also excess loss and uniformity of poposed 32*32 optical power coupler are below 0.3dB. The excess loss of proposed 32*32 optical power coupler is 2dB smaller than the optical power coupler with a shallowly etched MMI section. It is shown that the optical power splitters/couplers with a deeply etched mMI section have low loss, good uniformity, and improved fabriction tolerance.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.7
• /
• pp.79-87
• /
• 1997

Untill now, the most well-known cofiguration for waveguide grating router(WGR) is composed of radiative star couplers and arrayed waveguide grating(AWG), which usually suffer form the rdiation loss of around 3dB or more. Therefore, te improved design of WGRs is needed to reduce the loss. In ths paper, we propose a novel WGR composed of multimode interference couplers which have good unifiormity, fabrication tolerance, and very low excess loss, and suggest the efficient algorithm to find the proper path length differences of AWG for given channel spacing and channel assignment to each output prot. The simulated spectral responses of the proposed WGR using the finite difference beam propagation method (BPM) show that the excess loss is less than 0.3dB and the crosstalk less than -25dB in case of 4x4 WGR, and the excess loss less than 0.4dB and the crosstalk less than -25dB in case of 8x8 WGR for all the channel wavelengths.

• Journal of the Optical Society of Korea
• /
• v.12 no.3
• /
• pp.162-165
• /
• 2008

A novel planar lightwave circuit(PLC) triplexer using a three-waveguide interferometer(TWI) is proposed and examined using the transfer matrix and the beam propagation methods. The proposed triplexer consists of two three-waveguide couplers and three waveguides connecting the couplers. Simulation for the TWI triplexer shows the excess losses of 0.03 dB and 0.94 dB with the crosstalks of -22.3 dB and -14.5 dB in reception, respectively, for the wavelength of 1490- and 1550-nm, while showing the excess loss of 1.75 dB in transmission for the wavelength of 1310 nm. The proposed design shows compact feature as short as 11.5 mm for the refractive-index contrast of 0.45%.

• Korean Journal of Optics and Photonics
• /
• v.16 no.2
• /
• pp.138-142
• /
• 2005

In this paper, a method to eliminate the polarization dependent properties of fiber-to-planar waveguide couplers using a thin half-waveplate is proposed and demonstrated. The operation principle of the device is explained and the fabrication technology is presented. It is experimentally shown that the resonance wavelengths of the device are independent of the polarization state of input light.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.4
• /
• pp.368-378
• /
• 2004

In this paper, we proposed the compensation structures for the enhanced directivity of CPW(Coplanar waveguide) directional couplers with finite-extent backed conductor. The proposed compensation structures are. realized by expanding the slot width between signal line and ground plane in center region of couplers. The CPW couplers with expanded slot have the same phase velocity for even and odd mode because of added inductance and changed capacitance appropriately, so the enhanced directivity is accomplished. The designed CPW directional couplers have good directivity and matching characteristic at center frequency in simulation and measurement.

• Korean Journal of Optics and Photonics
• /
• v.13 no.1
• /
• pp.21-26
• /
• 2002

In the conventional star coupler, a certain amount of loss should be expected because lateral diffraction is used for the power distribution. In this paper, we propose a new design of a low loss star coupler which employs UV-written tapered waveguides and an AWG based on the low loss star couplers, and investigate their various characteristics. The loss of the UV-written star coupler is lower than that of the conventional star coupler, and the AWG device based on the UV-written star couplers shows low loss characteristics.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1986.10a
• /
• pp.20-22
• /
• 1986

This paper represents a graphical design technique of the symmetrical dielectric waveguids couplers. Once the phase constants are given by a approzimate model analysis, coupling lengths are easily calculated for each coupler. These method give some new insight of the codirectional couplers.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.25 no.1
• /
• pp.1-7
• /
• 1988

A new type broadband channel dropping filter which has a potential use as a millimeter-wave multiplexer has been realized by properly connecting 3-dB directional couplers and bandstop filters. 90\ulcorner3-dB directional couplers have been designed using two nonuniformly coupled dielectric image guides, while bandstop filters with Chebyshev passbands have been designed using dielectric image-guide grating structure. Effective dielectric constant method has been aplied to the image-guide dispersion analysis and to the design of bandstop gratings and 3-dB couplers. Experimental results in excellent agreement with computed responses are demonstrated.