• 화약ㆍ발파
• /
• 제27권1호
• /
• pp.38-46
• /
• 2009

최근 진동 소음을 저감하는 공법으로 초시의 정확성과 초시부여의 자율성을 가진 전자뇌관을 이용하는 공법(OBM ; Orechestra Blasting)이 소개되었다. 파형합성프로그램은 전자뇌관의 지연초시를 결정할 수 있으며 결정된 초시를 이용하여 실 발파와 유사한 환경에서의 시뮬레이션을 수행, 최적초시 상태의 진동 속도를 예측할 수 있다. 본 연구에서는 파형합성프로그램을 통해 진동을 제어하는 최적초시를 얻고 실제 발파작업 시의 진동치를 예측하고자 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.264-266
• /
• 2006

This traveling wave tube amplifier maintenance system was developed for performance of microwave Surveillance radar traveling wave tube amplification parts, and field operation. The Maintenance system is traveling wave tube amplification part RF output waveform measurement and HVPS Voltage adjustment and a maintenance function are offer. The system was developed as an embedded system base it consisted of Linux os which applied a top-down design and visual technique. Therefore change and easy extension of a system. This paper discussed characteristic of maintenance equipment function, composition, and an employment program.

• 풍력에너지저널
• /
• 제14권4호
• /
• pp.50-56
• /
• 2023

With the abnormal weather phenomena caused by global warming, the frequency and intensity of lightning strikes are increasing, and lightning accidents are becoming one of the biggest causes of failures and accidents in offshore wind turbines. In order to secure generator operation reliability, effective and practical measures are needed to reduce lightning damage. Because offshore wind turbines are tall structures installed at sea, the possibility of direct lightning strikes is very high compared to other structures, and the role of surge protection devices to minimize damage to the electrical and electronic circuits inside the wind turbine is very important. In this study, a varistor, which is a key element for a class 1 surge protection device for direct lightning protection, was developed. The current density was improved by changing the varistor composition, and the distance between the electrode located on the varistor surface and the edge of the varistor was optimized through a simulation program to improve the fabrication process. Considering the combined effects of heat distribution, electric field distribution, and current density on the optimized varistor surface, silver electrodes were formed with a gap of 0.5 mm. The varistor developed in this study was confirmed to have an energy tolerance of 10/350 ㎲, 50kA, which is a representative direct lightning current waveform, and good protection characteristics with a limiting voltage of 2 kV or less.