• 전기의세계
• /
• 제30권1호
• /
• pp.41-46
• /
• 1981

In the current source inverters (CSI), which are widely used recently in many applications, in order to reduce the harmonic contents in the output line current, twelve-step waveform is synthesized usually by a phase-shifted addition of the output currents of two single CSI's. In this paper a new method of synthesis of the 12-step current waveform is suggested which employes a main and a new auxiliary inverters having lower capacity, and thus is economically advantageous over the conventional scheme. DC-side commutation and energy rebond circuit as described in Part I are also employed in this proposed twelve-step CIS for effective commutation and high reliability. Experimental results are also given in oscillgrams.

• Structural Engineering and Mechanics
• /
• 제76권5호
• /
• pp.591-598
• /
• 2020

Ultrasonic waves provide a non-destructive and sensitive way to monitor the concrete hydration. However, limited works are reported to monitor the evolution of the mechanical parameter at early ages. In this study, modified piezoelectric aggregates are embedded inside a concrete beam to excite and receive primary waves. A hydration index, namely, the variation of ultrasonic waveform (VUW) is developed to characterize the variation of the transmitted waves during the hydration process. The recorded hydration indices are compared with the compressive strength measured by destructive test at different ages. The results show that the VUW is closer to the compressive strength than the other two traditional hydration indices, ultrasonic velocity and wave packet energy. The proposed VUW provides a simple and accurate way to monitor the concrete hydration at early ages.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2003년도 10월 학술대회지
• /
• pp.101-104
• /
• 2003

In this paper, speech quality is improved by removing abrupt noise intervals and then substituting the gaps with estimates of the previous speech waveform. An abrupt noise detection signal has been proposed as a prediction error signal by utilizing LP coefficients of the previous frame. Abrupt noise intervals are estimated by using spectral energy. After removing estimated noise intervals, we applied several waveform substitution techniques such as zero substitution, previous frame repetition, pattern matching, and pitch waveform replication. To prove the validity of our algorithm, the LPC spectral distortion test and the recognition test are executed and, the results show that the speech quality is fairly well improved.

• ETRI Journal
• /
• 제38권1호
• /
• pp.70-80
• /
• 2016

This paper addresses the problem of robust waveform design for distributed multiple-radar systems (DMRSs) based on low probability of intercept (LPI), where signal-to-interference-plus-noise ratio (SINR) and mutual information (MI) are utilized as the metrics for target detection and information extraction, respectively. Recognizing that a precise characterization of a target spectrum is impossible to capture in practice, we consider that a target spectrum lies in an uncertainty class bounded by known upper and lower bounds. Based on this model, robust waveform design approaches for the DMRS are developed based on LPI-SINR and LPI-MI criteria, where the total transmitting energy is minimized for a given system performance. Numerical results show the effectiveness of the proposed approaches.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.163-177
• /
• 2021

Numerical simulations of the Vortex-Induced Vibration (VIV) about a large-scale flexible pipe subject to shear flow were carried out in this paper. Efficiency verification was performed firstly, validating that the proposed fluid-structure interaction solution strategy is competent in predicting the VIV response. Then, the VIV characteristics related to multi-mode and spanwise hybrid waveform about the flexible pipe attributed to shear flow were investigated. When inflow velocity rises, higher vibration modes are apt to be excited, and the spanwise waveform easily convertes from a standing-wave-dominated status to a hybrid standing-traveling wave status. The multi-mode or even multiple-dominant-mode is prone to occur, that is, the dominant mode is often followed by several apparent subordinate modes with considerable vibration energy. Hence, the shedding frequencies no longer obey Strouhal law, and vibration trajectories become intricate. According to the motion analysis concerning the coupled cross-flow and in-line vibrations, as well as the corresponding wake patterns, a tight coupling interaction exists between the structural deformation and the wake flow behind the flexible pipe. In addition, the evolution of the vortex tube along the pipe span and a strong 3D effect are observed due to the slenderness of the flexible pipe and the variability of the vortex shedding attributed to the shear flow.

• 한국항공우주학회지
• /
• 제49권9호
• /
• pp.801-811
• /
• 2021

낙뢰는 짧은 시간 동안 다량의 에너지를 항공기에 전달하여 치명적인 결과를 초래할 수 있다. 특히 낙뢰는 고온의 열과 전류를 동반하여 항공기 표면 손상과 내부 전자장비에 영향을 미쳐 비행의 안전에 심각한 영향을 미칠 수 있다. 이를 분석하기 위한 낙뢰 시험에는 미항공우주원고서 SAE ARP 5412B에 규정된 최대전류 200kA인 Component A 파형이 사용된다. 하지만 실제 낙뢰 크기는 대부분 35kA 내외로 발생하며 전기체 대상으로 하는 낙뢰 간접 시험에서 내부 전자장비 손상 예방을 위해 파형을 축소하여 시험을 진행한다. 본 연구에서는 기존 Component A 축소 파형을 도식화하는 방법을 알아보고 그 한계를 분석하였다. 나아가 항공기 낙뢰 Component A 파형의 보정계수를 조절하는 방식의 신규 축소 파형 도식 방법을 제안한다. 마지막으로 전자기 해석 소프트웨어 EMA3D를 활용하여 EC-155B 헬리콥터 내부 케이블 하네스의 파형 감소비에 따른 내부 유도 전류 크기 감소비를 비교하였다.

• 한국정밀공학회지
• /
• 제18권7호
• /
• pp.127-133
• /
• 2001

The effects of triangular and rectangular discharge current waveforms on anode erosion in wire electric discharge machining is investigated based on heat transfer analysis of half-space subject to time and space-dependent heat flux. The thermal load on the anode is simulated by a hear flux that is calculated from time-dependent discharge channel radius and energy. Evolution of the melting front during discharge, the molten volume at the experimental result for qualitative verification of the analysis. It is demonstrated that the triangular current waveform is more efficient in eroding the anode than the rectangular one.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.92-94
• /
• 1994

In designing defibrillator several points must be considered such as patient's transthoracic impedance, output energy level, peak current, tine duration of current waveform. Patient's transthoracic impedance depends on patient respectively and the health condition of patient. In this study, before the hardware implementation of defibrillator we determine the range of parameter values of circuit elements to derive optimal discharge waveform by predicting and analyzing the performance of designed circuit.

• 지구물리와물리탐사
• /
• 제25권4호
• /
• pp.203-213
• /
• 2022

탄성파 탐사 자료의 영상화를 통해 지층의 구조를 파악하기 위해서는 지하 매질의 탄성파 속도 정보가 필수적이다. 지하 매질의 속도를 추정하기 위해 전파형역산(Full waveform inversion) 기술이 주목을 받고 있지만 3차원 전파형역산은 방대한 컴퓨터 자원과 계산 시간이 요구된다. 본 연구에서는 3차원 음향 전파형역산과 2차원 음향 전파형역산의 계산 성능과 정확성을 비교하고, 회절각 필터링 기술을 이용한 주파수영역 2차원 전파형역산을 통해 2차원 근사의 한계점을 일부 보완할 수 있음을 확인한다. 큰 반사각도의 성분만을 이용하는 회절각 필터링 기술을 적용하여, 3차원 탐사자료를 통해 2차원으로 근사할 때 문제가 될 수 있는 2차원 단면을 벗어난 지역으로부터의 반사파의 영향을 줄이고, 3차원 전파형역산과 구조보정에 필요한 장파장 속도구조를 구축할 수 있을 것으로 기대한다.

• 터널과지하공간
• /
• 제28권5호
• /
• pp.457-475
• /
• 2018

본 연구에서는 갱내채광장의 발파현상을 보다 현실적으로 수치해석상에서 반영하기 위하여 현장에서의 발파를 통해 획득한 발파진동 파형을 발파지점의 진동속도로 변환하여 이를 동적수치해석의 입력 자료로 직접 활용하였다. 석회석 갱내채광장의 지질특성과 채광단계를 반영한 수치모델을 구성하였으며, 이를 바탕으로 동적수치해석을 수행하여 석회석 갱내광산의 발파작업이 채광장의 안정성에 미치는 영향을 분석하였다. 해석결과와 현장에서 계측된 발파진동의 비교를 통하여 실측발파진동의 적정성을 확인하였으며, 연속되는 채광작업은 응력의 교란에 의한 천반붕락 및 채굴공동 주변의 활동성 파괴영역의 발생을 야기할 수 있는 것으로 분석되었다. 이로부터 연구대상 광산에서의 안정적인 채광활동을 위해서는 추가적인 보강대책이 필요할 것으로 판단된다.