• 한국해양공학회지
• /
• 제34권6호
• /
• pp.419-427
• /
• 2020

In this study, a particle image velocimetry (PIV)-based pressure estimation method was investigated, with application to the wave-in-deck loading phenomenon. An experimental study was performed in a two-dimensional wave tank using a fixed deck structure under a focused wave, obtaining local pressures by pressure sensors, global loads by load cells, and instantaneous velocity fields using the PIV measurement technique. The PIV-based pressure estimation method was applied using the Euler equation as the governing equation, and the proper time step for the wave impact pressure was studied using the normalized root-mean-square deviation. The pressure estimation method showed good agreement for the local impact pressure in comparison with the measured pressure by the pressure sensors. However, some differences were observed in the peak pressure due to the limitations of the Euler equation and the sampling rate of the measurement system. Using the estimation method, the pressure fields during wave-in-deck loading were determined in the study, with an analysis of the mechanism of impact and negative pressure occurrence.

• 한국소음진동공학회논문집
• /
• 제17권2호
• /
• pp.130-135
• /
• 2007

The purpose of this paper is that investigates the Natural Frequency behavior characteristic of wind turbine jacket type tower model, and calculated that the stress values of thrust load, wave load, wind load, current loda, gravity load, etc., environment evaluation analysis during static operating wind turbine jacket type tower model, carried out of natural frequency analysis of total load case to stress matrix, frequency calculated that calculated add natural frequency to stiffness matrix for determinant to stress results. The finite element analysis is performed with commercial F.E.M program (ANSYS) on the basis of the natural frequency and mode shape.

• 한국지반환경공학회 논문집
• /
• 제14권2호
• /
• pp.43-50
• /
• 2013

본 연구는 진동대 모형실험기를 이용하여 동하중 재하 시 네일 두부 구속방식에 따른 쏘일네일 보강사면의 거동에 관한 실험을 실시하였다. 진동대 모형실험은 네일 두부의 구속과 비구속조건 등을 변화시키면서 장주기 특성을 지닌 Hachinohe 지진파와 단주기 특성을 지닌 Ofunato 지진파를 적용하여 실험을 실시하였다. 실험으로부터 얻어진 결과를 바탕으로 사면의 파괴유형과 지반 가속도특성, 수직변위 및 수평변위를 비교 분석하였다. 진동대 모형실험을 수행한 결과 단주기파가 장주기파 보다 사면에 미치는 영향이 큰 것으로 나타났고, 네일 두부의 구속이 동하중에 대하여 전단저항력이 크게 발휘하는 것을 알 수 있었다. 또한 쏘일 네일 두부를 구속함으로써 지진하중 작용 시 사면의 안정성이 크게 향상됨을 확인할 수 있었다.

• 한국항해항만학회지
• /
• 제36권3호
• /
• pp.175-180
• /
• 2012

플로팅 상부구조물은 일반 건축물과 형태는 같지만 기초가 땅이 아닌 하부 부체에 지지되는 구조물로 파랑하중에 의한 영향을 크게 받으며, 파랑하중에 의한 하부구조물의 변형이 접합부에 영향을 미쳐 상부구조물의 이용자에게 사용성 및 안전성의 문제를 발생시키게 된다. 이에 따라 본 논문에서는 3차원 플로팅 구조물의 상부구조물과 하부구조물을 일체화한 전해석을 통하여 강접합과 반강접 접합에 대해 탄성 해석을 실시하였다. 구조물의 전해석과 하부구조물을 제외한 분리해석을 비교 분석 하였으며 탄성 해석을 통해 파랑하중의 CASE를 나누어 파랑하중의 변화에 따른 구조물의 모멘트 및 변위를 접합부에 따라 분류하고 비교하였다.

• 국제강구조저널
• /
• 제18권4호
• /
• pp.1191-1199
• /
• 2018

Concepts of submerged floating tunnels (SFTs) for land connection have been continuously suggested and developed by several researchers and institutes. To maintain their predefined positions under various dynamic environmental loading conditions, the submerged floating tunnels should be effectively moored by reasonable mooring systems. With rational mooring systems, the design of SFTs should be confirmed to satisfy the structural safety, fatigue, and operability design criteria related to tunnel motion, internal forces, structural stresses, and the fatigue life of the main structural members. This paper presents a feasibility study of a submerged floating tunnel moored by an inclined tendon system. The basic structural concept was developed based on the concept of conventional cable-stayed bridges to minimize the seabed excavation, penetration, and anchoring work by applying tower-inclined tendon systems instead of conventional tendons with individual seabed anchors. To evaluate the structural performance of the new type of SFT, a hydrodynamic analysis was performed in the time domain using the commercial nonlinear finite element code ABAQUS-AQUA. For the main dynamic environmental loading condition, an irregular wave load was examined. A JONSWAP wave spectrum was used to generate a time-series wave-induced hydrodynamic load considering the specific significant wave height and peak period for predetermined wave conditions. By performing a time-domain hydrodynamic analysis on the submerged floating structure under irregular waves, the motional characteristics, structural stresses, and fatigue damage of the floating tunnel and mooring members were analyzed to evaluate the structural safety and fatigue performance. According to the analytical study, the suggested conceptual model for SFTs shows very good hydrodynamic structural performance. It can be concluded that the concept can be considered as a reasonable structural type of SFT.

• 대한토목학회논문집
• /
• 제42권4호
• /
• pp.469-480
• /
• 2022

경사식방파제의 상치콘크리트 설계를 위해서는 수평파압이 산정되어야 하지만 불명확한 부분이 있다. Lee et al.은 상치콘크리트에 작용하는 수평파압 산정시 적용되고 있는 Goda 파압식의 수평파압보정계수를 제안하였다. Lee et al.의 제안식은 2차원 실험결과에 기반을 두고 있으며, 상치콘크리트 전면 피복재 어깨폭이 좁은 경우에 대한 것이다. 본 연구에서는 동일한 실험장비를 이용하여 피복재 어깨폭이 넓은 조건에 대한 수평파압 계측실험을 수행하였다. 노출부 구간의 경우에는 피복재 어깨폭의 증가에 따른 수평파압의 변화는 크지 않았으며, 보호부 구간의 경우에는 어깨폭이 증가함에 따라 수평파압이 감소하였다. 실험결과를 이용하여 피복재 어깨폭의 영향을 고려한 Goda 파압식의 파압보정계수를 제안하였다. 본 제안식은 테트라포드가 피복된 경사식방파제의 상치콘크리트 설계에 실무적으로 적용 가능할 것으로 기대된다.

• Computers and Concrete
• /
• 제33권4호
• /
• pp.399-407
• /
• 2024

This study nondestructively examined the evolution of crack density in ultra-high performance concrete (UHPC) upon cyclic loading. Uniaxial compression was repeatedly applied to the cylindrical specimens at levels corresponding to 32% and 53% of the maximum load-bearing capacity, each at a steady strain rate. At each stage, both P-wave and S-wave velocities were measured in the absence of the applied load. In particular, the continuous monitoring of P-wave velocity from the first loading prior to the second loading allowed real-time observation of the strengthening effect during loading and the recovery effect afterwards. Increasing the number of cycles resulted in the reduction of both elastic wave velocities and Young's modulus, along with a slight rise in Poisson's ratio in both tested cases. The computed crack density showed a monotonically increasing trend with repeated loading, more significant at 53% than at 32% loading. Furthermore, the spatial distribution of the crack density along the height was achieved, validating the directional dependency of microcracking development. This study demonstrated the capability of the crack density to capture the evolution of microcracks in UHPC under cyclic loading condition, as an early-stage damage indicator.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.109-116
• /
• 2000

Rippability refers to the ease of excavation by construction equipment. Since it is related to rock quality in terms of hardness and fracture density, which may be measured by seismic refraction surveys, correlations have been made between rippability and seismic P wave velocities. The 1-channel signal enhancement seismograph(Bison, Model 1570C) was used to measure travel time of the seismic wave through the ground, from the source to the receiver. The seismic velocity measurement was conducted with 153 lines at 5 rock slopes of Chungbuk Youngdong area. Schmidt rebound hardness test were conducted with 161 points on rock masses and the point load test also on 284 rock samples. The uniaxial compressive strength and seismic wave velocity of 60 rock specimens were measured in laboratory. These data were used to evaluate the rock quality of 5 rock slopes.

• 대한기계학회논문집A
• /
• 제35권1호
• /
• pp.99-106
• /
• 2011

본 논문에서는 유한요소법을 이용하여 일정 장력을 받고 있는 가선계 모델에 대한 동적 접촉에 의한 파동 전파와 반사에 대한 연구를 연구하였다. 장력을 고려하기 위하여 새롭게 정의된 3 차원 빔 모델을 정의하였으며 이를 이산화하여 유한요소모델을 수립하였다. 또한 동적 접촉 해석을 위하여 라그랑지 승수법을 이용한 접촉 해석 모델을 정의하여 가선계와 질점하중간의 접촉해석을 수행하였다. 이동하중의 속도를 증가시키면서 발생하는 접촉력의 변화를 관찰하여 파동의 전파와 반사에 대한 수치적인 해를 구하였으며, 이를 이론적인 해와 비교하여 해석모델의 검증을 수행하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1473-1478
• /
• 2010

For the cassion type of breakwater under the condition of large wave loads, stability about lateral movement of breakwater was investigated by performing centrifuge model experiments. Prototype of breakwater was modelled by scaling down to centrifuge model and the soft ground reinforced with grouting was also reconstructed in the centrifuge model experiments. Sandy ground beneath breakwater was prepared with a soil sampled in field so that identical value of internal friction angle could be obtained. Centrifuge model experiments were carried out to reconstruct the construction sequence in field. Lateral static wave load was applied to the model caisson after the final stage of construction sequence was rebuilt and the measured lateral movement of caisson was compared with allowable value by the code to assess the stability about lateral movement of the breakwater.