• 제목/요약/키워드: Wave fin

검색결과 57건 처리시간 0.029초

사력댐 동적물성 추정을 위한 현장조사기법 적용 및 분석 (Application and Analysis of Field Test and Geophysical Exploration for Dynamic Material Properties of Rockfill Dam)

  • 이종욱;김기영;전제성;조성은
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 2005년도 지반공학 공동 학술발표회
    • /
    • pp.352-359
    • /
    • 2005
  • In this study, seismic refraction survey and MASW at dam crest and down-hole test and cross hole test in the boring holes located in dam crest through the core are performed to fin out dynamic material properties, are needed to evaluate dynamic safety of rockfill dam using dynamic analysis method. From the field test and geophysical exploration, applied such as above, p-wave and s-wave velocity profile of each layer of dam body. Dynamic material properties, such as elastic modulus, shear modulus, poissong's ration, are obtained from p-wave and s-wave velocity profile and density profile from formation density logging test.

  • PDF

자세제어장비를 장착한 선박의 파랑중 운동 모델링 및 시뮬레이션 (Modeling and Simulation of a Ship with Anti-Rolling Devices in Waves)

  • 윤현규;이경중;이창민
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2004년도 춘계학술대회 논문집
    • /
    • pp.285-290
    • /
    • 2004
  • 파도에 의한 힘과 모멘트는 운항하는 선박에 운동을 발생시킨다. 이러한 운동은 승무원의 작업 능률 저하, 화물의 안전 및 승선감 등에 영향을 주게 되어 안전 운항 저해 요소가 되므로 파도에 의한 운동이 큰 선박들은 자세제어장비(anti-rolling devices)의 장착이 요구된다. 본 연구에서는 수ㆍ능동의 이동질량 안정기(moving weight stabilizer), 감요탱크(anti-rolling tank), 핀 스태빌라이저(fin stabilizer)와 같은 자세제어장비의 동적 거동을 수학적으로 모델링 하였다. 기존에는 자세제어장비의 운동을 선박의 횡동요에만 고려한 반면, 본 연구에서는 선박의 6자유도 운동을 모두 고려하여 연성 운동방정식을 정립하였다. 마지막으로 자세제어장비를 장착한 선박의 파중 운동 계산 프로그램을 작성하여 시뮬레이션을 수행하였다.

  • PDF

적층형 EGR Cooler의 Pitch 길이 변화가 열교환 특성에 미치는 영향 (Effects of Pitch Length of Stack-type EGR Cooler on Heat Exchange Characteristics in a Diesel Engine)

  • 황세준;김민철;장상훈;김형만
    • 한국자동차공학회논문집
    • /
    • 제18권2호
    • /
    • pp.135-140
    • /
    • 2010
  • An important goal in diesel engine research is the development of a means to reduce the emissions of nitrogen oxides (NOX). The use of a cooled exhaust gas recirculation (EGR) system is one of the most effective techniques currently available for reducing nitrogen oxides. Since Particular Matter (PM) fouling reduces the efficiency of an EGR cooler, a trade-off exists between the amount of NOX and PM emissions, especially at high engine loads. In the present study, engine dynamometer experiments have been performed to investigate the heat exchange characteristics of the stack-type EGR coolers with wave fin pitches of 3.6 and 4.6 mm. The results show that the heat exchange effectiveness is decreased as surface area decrease with pitch of 4.6 mm due to PM fouling. As surface area increase at pitch of 3.6 mm, super-cooling happens in the recirculated exhaust gas.

물고기 로봇 개발을 위한 유연한 꼬리 지느러미 관절의 강성에 따른 최대 추력 조건 연구 (Maximum Thrust Condition by Compliant Joint of a Caudal Fin for Developing a Robotic Fish)

  • 박용재;정우석;이정수;권석령;김호영;조규진
    • 제어로봇시스템학회논문지
    • /
    • 제18권2호
    • /
    • pp.103-109
    • /
    • 2012
  • Fish generates large thrust through an oscillating motion with a compliant joint of caudal fin. The compliance of caudal fin affects the thrust generated by the fish. Due to the flexibility of the fish, the fish can generate a travelling wave motion which is known to increase the efficiency of the fish. However, a detailed research on the relationship between the flexible joint and the thrust generation is needed. In this paper, the compliant joint of a caudal fin is implemented in the driving mechanism of a robotic fish. By varying the driving frequency and stiffness of the compliant joint, the relationship between the thrust generation and the stiffness of the flexible joint is investigated. In general, as the frequency increases, the thrust increases. When higher driving frequency is applied, higher stiffness of the flexible joint is needed to maximize the thrust. The bending angles between the compliant joint and the caudal fin are compared with the changes of the thrust in one cycle. This result can be used to design the robotic fish which can be operated at the maximum thrust condition using the appropriate stiffness of the compliant joint.

주거용 15W COB LED 다운라이트 방열판 최적설계에 따른 열적 특성 분석 및 평가 (Thermal Characteristics of the Optimal Design on 15W COB LED Down Light Heat Sink)

  • 권재현;박건준;김태형;김용갑
    • 한국정보통신학회논문지
    • /
    • 제18권2호
    • /
    • pp.401-407
    • /
    • 2014
  • 열에 관한 문제를 해결하기 위해 여러 개의 LED 칩을 1개의 보드에 밀집으로 배열한 COB(Chip On Board)에 관한 관심이 증가하고 있다. LED소자의 온도가 올라갈수록 수명이 감소하고 스펙트럼선의 파장이 본래의 파장보다 장파장 쪽으로 이동하는 적색 이동 현상 및 접합부 온도 상승에 따라 광 출력이 감소되는 큰 문제점이 대두되고 있다. 이러한 열 문제점을 해결하기위해 본 논문에서는 최적의 Fin 두께와 길이를 선정하여 15W급 COB LED 최적의 2차 방열판을 설계하고, 그 설계한 방열판과 15W COB를 패키지하여 Solid Works Flow Simulation을 통한 열적 특성을 분석하여 제작된 15W COB 다운라이트 방열판을 접촉식 온도계를 사용해 열적 특성, 키슬리 2430을 통한 전기적 특성을 분석하였다.

SpaceX Falcon 9 그리드핀의 공력 특성 (Aerodynamic Characteristics of the Grid Fins on SpaceX Falcon 9)

  • 이형진;조우성;고상호;이열
    • 한국항공우주학회지
    • /
    • 제48권10호
    • /
    • pp.745-752
    • /
    • 2020
  • SpaceX Falcon 9에 탑재된 초음속 그리드핀 유동에 관한 수치해석을 통하여 해당 그리드핀의 공력특성을 평가하였다. 3차원 정상 수치해석 계산의 효율성 향상을 위하여 단위 그리드핀 개념을 도입하였다. 본 연구에서는 발사체의 받음각, 외부 프레임, 그리고 커넥팅 로드 등의 영향성을 보정하는 전후 처리과정을 개선하였고, 이에 따라 최종 공력계산의 정확도가 과거 연구에 비하여 향상되었음을 확인하였다. 이후 천음속과 초음속 비행조건에서 다양한 받음각을 갖는 SpaceX Falcon 9 그리드핀의 공력특성을 평가하였다.

고속 연안순시선 선형개발과 저항성능에 관한 연구 (A Study on the Hull Form Development and Resistance Performance of a High-Speed Coastal Patrol Boat)

  • 정우철;정석호;전호환
    • 한국해양공학회지
    • /
    • 제18권3호
    • /
    • pp.44-49
    • /
    • 2004
  • Initial hull form of 10 G/T and 40 knots class coastal patrol boat is newly developed. The resistance performances are experimentally and numerically investigated by model test and CFD technique. The effect of initial trim and a fin attached at hull side are studied together. Wave patterns are observed to make clear the relation between the performance and the wave characteristics. It can be found that the initial trim plays a role in increasing the resistance performance above a certain velocity, and the CFD technique can be used at the initial design stage of a high-speed planning boats.

30피트급 고속 알루미늄 레저보트 선형개발과 저항성능에 관한 연구 (Study on Hull Form Development and Resistance Performance of High Speed Aluminum Leisure Boat)

  • 정우철;김도정;최홍식
    • 한국해양공학회지
    • /
    • 제26권6호
    • /
    • pp.14-18
    • /
    • 2012
  • A 30ft class aluminum leisure boat is newly developed and the resistance performances are investigated by a model test at a high-speed circulating water channel. The effect of a fin attached to the side of the hull is studied at two different displacements. Wave patterns are observed to make clear the relationship between the resistance performance and wave characteristics. It can be found that a chine position at the draft line can have a strong effect on the resistance performance around a certain velocity range.

자세제어장비를 장착한 선박의 파랑중 운동 모델링 및 시뮬레이션 (Modeling and Simulation of a Ship with Anti-Rolling Devices in Waves)

  • 윤현규;이경중;이창민
    • 한국항해항만학회지
    • /
    • 제28권5호
    • /
    • pp.347-352
    • /
    • 2004
  • 파도에 의한 힘과 모멘트는 운항하는 선박에 운동을 발생시킨다. 이러한 운동은 승무원의 작업 능률 저하, 화물의 안전 및 승선감 등에 영향을 주게 되어 안전 운항 저해 요소가 되므로 파도에 의학 운동이 큰 선박들은 자세제어장비(anti-rolling devices)의 장착이 요구된다. 본 연구에서는 수 능동의 이동질량안정기(moving weight stabilizer), 감요탱크(anti-rolling tank), 핀스태빌라이저(fin stabilizer)와 같은 자세제어장비의 동적 거동을 수학적으로 모델링 하였다 기존에는 자세제어장비의 운동을 선박의 횡동요에만 고려한 반면, 본 연구에서는 선박의 6자유도 운동을 모두 고려하여 복합운동방정식을 정립하였다. 마지막으로 자세제어장비를 장착한 선박의 파중 운동 계산 프로그램을 작성하여 시뮬레이션을 수행하였다.