• 조명전기설비학회논문지
• /
• 제26권5호
• /
• pp.79-84
• /
• 2012

As the huge economical loss and function paralysis of information technology-based systems can be caused by the misoperation of residual current devices(RCDs) due to surge voltages and currents, RCDs shall not operate by surge currents. In this paper, in order to evaluate the reliability of residual current operated circuit-breakers with integral overcurrent protection for household and similar uses((RCBOs) stressed by surges, the unintended trip characteristics of RCBOs under surge currents were experimentally investigated using the combination wave generator. Seven different types of single-phase RCBOs being present on the domestic market were investigated according to KS C IEC 61009-1 standard. As a result, all kinds of specimens were satisfied the requirements for 0.5 [${\mu}s$]/100[kHz] ring wave impulse currents. Most of specimens stressed by the 8/20[${\mu}s$] impulse current tripped at least one or more, and some of them were broken down during consecutive tests. It was found that only one type of specimens meets the L-N mode immunity to the combination wave of 1.2/50[${\mu}s$] impulse voltage and 8/20[${\mu}s$] impulse current.

• 한국융합학회논문지
• /
• 제10권2호
• /
• pp.201-206
• /
• 2019

해안 영역에서의 해수의 범람은 재산 및 인명피해를 야기한다. 이러한 피해를 최소화 하고자 방파시설을 설치하지만, 고정식 방파시설의 경우, 변화하는 해상상태에 대응할 수 없으며, 과도한 설정에 의한 설치는 환경적 피해를 일으킨다. 본 연구에서는 환경적 피해를 줄이고 선박의 항행에 지장이 없는 가변식 초기 쇄파 장치에 대한 연구를 실험적 방법과 입자법을 이용한 수치 해석적 방법으로 연구하였다. 초기 쇄파 장치의 유무에 따라 해안절벽으로 넘어오는 파의 범람은 큰 차이가 있었으며, 이는 실험과 수치 해석 모두 확인되었다. 또한 초기 쇄파 장치의 위치에 따른 영향 역시 고려되었으며, 위치 역시 중요한 요소임이 확인되었다.

• 대한조선학회논문집
• /
• 제47권4호
• /
• pp.525-532
• /
• 2010

In this paper, wave breakers which occur in two dimensional coasts are simulated using a SPH(Smoothed Particle Hydrodynamics) method which represents the movement of fluidic physical volume with particles. As continuative fluid is approximated to the particles, the simulations are performed using fully Lagrangian method without any grid system. Two-dimensional Navier-Stokes equations and continuity equation are used for the numerical simulations. To generate incident waves, a piston type wavemaker is employed. The accuracy of the wave which is numerically generated by the wavemaker is verified by comparing with analytical results. The computations are carried out with various wave heights and slopes. The wave patterns generated through the numerical simulations are compared with several existing experimental and computational results. Agreement between the experimental data and the computation results is comparatively good. Also, the breaker depth index and the breaker height index from the present calculations are compared with the existing experimental results, and the tendency is very similar.

• 한국해안해양공학회지
• /
• 제11권2호
• /
• pp.87-94
• /
• 1999

圓形斷面 部材를 갖는 해안 및 해양구조물의 설계에서 波力은 주로 正弦波의 입사를 가정한 모리슨식을 적용하여 산출하는 것이 상례이나. 구조물에 대하여 강한 卷波性 碎波가 작용할 경우에는 모리슨식에 의한 계산치보다 훨씬 큰 衝擊碎波力이 발생한다. 그러나, 충격쇄파력은 그 작용시간이 매우 짧기 때문에 구조물 설계로의 반영 여부 및 규모를 결정하기 위해서는 충격쇄파력 작용에 대한 구조물 전체의 動的擧動을 검토하여야 한다. 본 연구는 충격쇄파력의 작용에 의한 단일 연직파일의 동적변위를 해석하기 위한 수치해석기법을 수리하였으며, 파일의 제원을 달리하는 여러 예제해석을 통하여 파일의 정적변위와 동적 변위를 비교하였다.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제54권11호
• /
• pp.519-526
• /
• 2005

This paper presents computer simulation results for developing new type of SF$_{6}$ Circuit Breaker in terms of cold gas flow after small current interruption. This cold gas flows down a nozzle into the chamber of a circuit breaker. There are many difficult problems in analyzing the gas flow due to complex geometry, moving boundary, shock wave and so on. When predicting the dielectric capability of a gas circuit breaker after interruption, the gas pressure and density distributions due to the cold gas must be considered in addition to the electrical field imposed across the gas. A self-coded computational fluid dynamics (CFD) program is used for the simulation of cold gas flow in order to evaluate the electrical field characteristic across open contacts and transient characteristics of insulations after small current interruption.

• 한국해양공학회지
• /
• 제24권1호
• /
• pp.106-115
• /
• 2010

This study described the stability of riprap, which was examined by a two-dimensional physical model of a scattered riprap submarine breakwater. Artificial reef structures made of scattered riprap are used like artificial intertidal zone structures as waterfront seaside structures. To prevent topography change in such an artificial intertidal zone the energy is reduced at the scattered riprap submarine breakwater by intercepting high waves. The breaking waves are converted into flow on the front surface slope of the submarine breakwater, which follows the upper part of the artificial intertidal zone. Because of this phenomenon of resisting water flow, it is very important to calculate the required weight of the riprap to maintain its stability. The results of a physical model can be abstracted as shown below. First, distribute the wave breaking types occurring on the front surface slope of the submarine breakwater and arrange it in relation to the movement of riprap. Second, using the hydraulic phenomenon that occurs at the depth of the scattered riprap submarine breakwater, propose a calculation formula for the velocity distribution showing the influence on the stability of the riprap. Third, propose and compare values, which can be obtained by experiments and calculations for riprap stability on the front surface of the artificial intertidal zone. Fourth, calculate the required weight for riprap stability.