• 한국지구물리탐사학회:학술대회논문집
• /
• 한국지구물리탐사학회 2007년도 공동학술대회 논문집
• /
• pp.237-240
• /
• 2007

The evaluation of shear modulus (or shear wave velocity) profile of site is very important in the various fields of geotechnical engineering. To obtain shear wave velocity profile, various in-situ seismic methods using surface waves have been developed. These surface wave based in-situ seismic methods have their own strength and weakness. In this study, new seismic site characterization method using the harmonic wavelet analysis of wave (HWAW) was proposed to overcome some of weaknesses in the existing surface wave based seismic site characterization methods. HWAW method which is based on time-frequency analysis using harmonic wavelet transform have been developed to determine phase and group velocities of waves. In order to estimate the applicability of HWAW method, field tests were performed. Through field applications and comparison with other test results, the applicability of the proposed method were verified.

• Journal of applied mathematics & informatics
• /
• 제20권1_2호
• /
• pp.197-208
• /
• 2006

This paper deals with the exact solution of surface gravity waves in an ocean with irregular bed topography. In order to obtain water surface elevation and run-up of infra-gravity waves when the bed is either wavy or exponential, closed form solutions are obtained. Numerical computations indicate that when solitary wave or sinusoidal wave conditions are applied at the boundary, water surface elevation attains near Gaussian profile.

• 대한토목학회논문집
• /
• 제36권5호
• /
• pp.819-830
• /
• 2016

아직까지 밀도성층을 통과하는 파랑변형에 관한 동수학적 특성에 대해서 명확히 밝혀진 부분은 그다지 많지 않다. 따라서 본 연구에서는 2층 밀도성층을 통과하는 파랑의 수리특성을 수치적으로 해석하기 위하여 온도와 염분에 따른 밀도류를 해석할 수 있게 개량된 3차원 수치파동수조(LES-WASS-3D ver. 2.0)를 이용하여 수치시뮬레이션을 수행하였다. 그리고 이용하는 수치파동수조의 타당성 및 유효성을 확인하기 위하여 Stokes 3차 파랑이론에 근거한 내부파형을 비교 검토하였다. 수치시뮬레이션 결과로부터 밀도성층을 통과하는 수면파 및 내부파의 파고가 감소하는 현상을 알 수 있었으며, 이것은 상 하층의 밀도차이에 기인한 전파속도 차이로 인하여 계면에서 강한 와도가 발생하기 때문으로 확인되었다. 또한 밀도성층의 밀도차이가 증가할수록, 상 하층의 수심비가 증가할수록(상층의 수심이 깊어질수록) 와도가 강하게 발생하여 수면파 및 내부파의 파고감쇠를 심화시키는 것을 확인할 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.280-285
• /
• 2000

It is very important to evaluate the surface or subsurface microstructure because of their influences on mechanical properties of materials. Surface SH-wave which is horizontally polarized shear wave traveling along near surface and subsurface layer is an attractive technique for material evaluation. The destructive method is widely used for the estimation of material degradation but it has a great difficulty in preparing specimens from in-service industrial facilities. In this study, nondestructive evaluation for degraded structural materials used at high temperature though surface SH-wave method is discussed. 2.25Cr-1Mo steel specimens which were prepared by the isothermal aging heat treatment at $650^{\circ}$ were evaluated though ultrasonic nondestructive evaluation techniques investigating the change of sound velocity, attenuation coefficient and amplitude spectra. In addition, it has verified experimentally the frequency-dependence of attenuation coefficient though wavelet analysis method.

• Journal of Advanced Research in Ocean Engineering
• /
• 제2권2호
• /
• pp.48-60
• /
• 2016

Accurate simulation of free-surface wave flows around a ship is very important for better hull-form design. In this paper, a computational fluid dynamics (CFD) code which is based on the open source libraries, OpenFOAM, was developed to predict the wave patterns around a ship. Additional anti-diffusion source term for minimizing a numerical diffusion, which was caused by convection differencing scheme, was considered in the volume-fraction transport equation. The influence of the anti-diffusion source term was tested by applying it to free-surface wave flow around the Wigley and KCS model ships. In results, the wave patterns and hull wave profiles of the Wigley and KCS model ships for various anti-diffusion coefficients showed quite close patterns. While, the band width of the water volume-fraction values between 0.1 to 0.9 at the Wigley and KCS model hull surfaces was narrowed by considering the anti-diffusion term. From the results, anti-diffusion source term decreased free-surface smearing.

• 한국항해항만학회지
• /
• 제38권5호
• /
• pp.443-450
• /
• 2014

The objective of this study is to examine the nonlinear fluid characteristics near and inside a moonpool in various sea conditions. We estimate the flow of the free surface in a moonpool taking into account the viscosity effect and the hydrodynamic forces that affects a moonpool and hull through CFD calculations. The comparison of horizontal forces per wave length shows that the hydrodynamic force is greater for the long wave length than short wave length, and the greatest hydrodynamic force acts on the moonpool when the wave length is equal to the ship's length. The horizontal force decreases as the wave amplitude decreases, and the hydrodynamic force acting on the moonpool in ${\lambda}=LBP$ is 10 times that in ${\lambda}=LBP/3$. The free surface demonstrates the piston mode, in which it oscillates up and down while remaining essentially flat, and the rise of the free surface level increases as the wave length increases. We can assume that the hydrodynamic force acting on the moonpool increases owing to the effect of a strong vortex for ${\lambda}=LBP$ and owing to the rise of the free surface level for ${\lambda}=LBP{\times}2$.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.111-111
• /
• 2009

In this work, we discuss simulation of surface acoustic wave device using Comsol Multiphysics. The structure SAW device based on piezoelectric thin film aluminum-nitride (AlN) on silicon was simulated. Some parameters of SAW device such as surface velocity, displacement of piezoelectric thin film were evaluated by software. Many modes and shapes of wave are also discussed in this paper. For evaluation physical parameters of AlN piezoelectric layer, the SAW resonator was modeled and simulation results were also compared with experiment results. we simulated arid evaluated the surface Rayleigh wave of AlN thin film on silicon substrate. Results simulation and experiment showed the surface velocity of AlN thin film was about 5200 m/s and shape of surface wave was also displayed. This paper has also proposed as method to study SAW characteristic of piezoelectric thin film and found out measurement values accurately of film such as stiffness matrix, piezoelectric matrix. These values are very important in calculation and design SAW device or MEMS device based on AlN piezoelectric layer.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2022년도 추계학술대회
• /
• pp.113-114
• /
• 2022

본 연구는 선박의 내부의 비금속 재질 등으로 인하여 표면파 공진기의 설치가 어려운 환경에서 이를 극복하는 방법으로 플렉서블 기판을 이용한 표면파 공진기의 적용 가능성에 대하여 제작 및 실험을 통해 확인하였다. 설계 제작된 플렉서블 공진기의 곡면구조에서 실험한 결과 평면구조에서 평면형 공진기보다 성능은 열화되지만, 곡면구조에서 평면형 공진기 대비 높은 전송속도를 확인하여 그 적용 가능성을 확인하였다. 본 실험을 통해 평면형 표면파 공진기가 부착되기 어려운 구조물에서도 금속체 표면파 통신이 가능할 것으로 생각되며, 선실 선교 등 내부가 비금속 포장재로 되어 있는 공간에서도 내부의 연결된 금속 파이프를 통해 선박 전 구간에서 최적의 금속체 표면파 통신 구성이 가능할 것으로 생각한다.

• 한국전자파학회논문지
• /
• 제26권10호
• /
• pp.869-875
• /
• 2015

본 논문에서는 배열 안테나 설계 시 격리도의 문제를 야기시키는 표면파에 관한 기초적인 연구를 진행하였다. 마이크로스트립 패치 안테나의 표면파와 유사한 환경에서 모의실험을 진행하기 위해 접지된 유전체 평판(grounded dielectric slab) 모델을 사용하였으며, DGS, PMC, Soft 표면, Hard 표면 등 다양한 접지면 형태에 따른 표면파 전파에 대해 모의실험을 진행하였다. 모의실험 결과에 의하면 TM-wave 입사 시 DGS의 경우 25 % 정도의 전파 차단 효과가 나타났으며, PMC와 Soft 표면의 경우 95 % 이상의 전파를 차단하는 결과를 나타내었다. 이 연구는 격리도 향상을 통한 배열안테나의 이득 증대에 유용하게 사용될 것이다.

• 한국해양공학회지
• /
• 제9권2호
• /
• pp.75-82
• /
• 1995

The free surface effects on the aerodynamic performance of 2-D wings are investigated based on the potential flow approximation. The wing is represented b source and vortex distributions on the wing surface. The steady free surface effect is taken into account by source distribution on the free surface and the velocity potentials of air and water flows are obtained. Using three different techniques, namely, positive image method, inverse image method and source distribution method, numerical results are obtained for wave elevation, pressure distribution and lift coefficient with various foil sections. The wave elevation calculated by the inverse image method is shown to be very small even at higher speeds so that the free surface effect on the performance of wings is regraded negligible. However, the wave elevations by the positive image method and source distribution method are relatively high at higher speeds and accordingly the free surface effects on wings can not be neglected.