• Restorative Dentistry and Endodontics
• /
• 제37권4호
• /
• pp.220-227
• /
• 2012

Objectives: The study was to compare the shaping ability of Reciproc (VDW) and WaveOne (Dentsply Maillefer) instruments compared with ProTaper, Profile and hand instrument during the preparation of simulated root canals. Materials and Methods: Five groups (n = 5) were established. Reciproc, WaveOne, ProTaper, Profile and K file (K-flexo file) were used to prepare the resin simulated canals. A series of preoperative and postoperative images were taken by a microscope and superimposed in 2 different layers. The amount of resin removed from both the inner and the outer sides of the canal was measured to the level of 10 mm from the apical tip, with a 1 mm increment. Results: The mean of resin removal from the inner canal wall was not different from the outer canal wall for Reciproc and WaveOne groups at apical third (1 - 3 mm level). There was no difference in the change of working length and maintenance of canal curvature. NiTi instruments are superior to stainless-steel K file in their shaping ability. Conclusions: Within the limitation of this present study, Reciproc and WaveOne instruments maintained the original canal curvature in curved canals better than ProTaper and Profile, which tend to transport towards the outer canal wall of the curve in the apical part of the canal.

• The Journal of the Acoustical Society of Korea
• /
• 제17권1E호
• /
• pp.44-53
• /
• 1998

Bolt degradation has become a major issue in the nuclear industry since the 1980's due to failure during operation. If small cracks in stud bolt are not detected early enough, they grow rapidly and cause catastrophic disasters. Their detection, despite its importance, is known to be a very difficult problem due to the complicated structures of the stud bolts. This paper presents a method of detecting and sizing a small crack in the root between two adjacent crests in threads. The key idea is from the fact that the Rayleigh wave propagates slowly along a crack from the tip to the opening and is reflected from the opening mouth. When there exists a crack, a small delayed pulse due to the Rayleigh wave is detected between large regularly spaced pulses from the thread. The delay time is the same as the propagation delay time of the slow Rayleigh wave and is proportional to the size of the crack. To efficiently detect the slow Rayleigh wave, three methods based on digital signal processing are proposed : modified wave shaping, dynamic predictive deconvolution, and dynamic predictive deconvolution combined with wave shaping.

• Restorative Dentistry and Endodontics
• /
• 제27권5호
• /
• pp.521-529
• /
• 2002

The purpose of this study was to compare the shaping time of two shaping methods and the leakage of three different obturation techniques. Ninty three canaled human molar teeth were used, which were randomly divided into two groups of forty teeth each and ten control teeth. After working length determination, the one group was prepared crown-down technique using rotary root canal instruments of GT rotary files .12/20, .10/20, .08/20 and .06/20 taper(Maillefer Instrument SA. Switzerland). The other group was instrumented with Gates Glidden burs(#1, #2, and #3) to coronal preparation and GT rotary files .08/20 and .06/30 taper to apical preparation. Shaping time was measured. After root canals were instrumented, they were divided to three subgroups and obturated as follows : Subgroup 1, obturated with single cone method Subgroup 2, obturated with lateral condensation : Subgroup 3, obturated with continuous wave technique. Three subgroups were obturated using non-standardized gutta-percha cone(Diadent, Korea, .06 or .08 taper) and AH-26(Dentsply DeTrey, Germany) as a root canal cement. Ten unobturated teeth served as positive and negative controls. After immersion in 2% methylene blue solution for 1 month, the teeth were washed during 24h. The teeth were demineralized in 10% nitric acid and dehydrated by immersion in 80, 90 and 100% ethyl alcohol. The teeth were finally cleared and stored in 100% methylsalicylate, and apical dye penetration was evaluated under stereomicroscope(Leica M420, LC, U.S.A)at $\times$8.75 magnification. Liner measurement of dye penetration was assessed with the use of digitalized image analysing system (analySIS, GmbH, Germany) The data were analysed statistically using independent T-test and Two-way ANOVA and Tukey test. The result were as follows 1. In canal prepared with GT$^{TM}$ rotary file, shaphing time taked more than the group of using Gates Glidden drill to coronal preparation without statistical significance (p>0.05) 2. The group of single cone obturation using canal preparation of GT$^{TM}$ rotary files showed significantly more apical leakage than those of lateral condensation and continuous wave technique regardless of shaping method (p<0.05). 3 The group of single cone obturation using canal preparation of GT$^{TM}$ rotary files and Gates Glidden drill showed significantly more apical leakage than those of continuous wave technique regardless of shaping method (p<0.05). 4. Regardless of shaping method, The group of continuous wave obturation showed less apical leakage than those of lateral condensation without statistical significance (p>0.05). 5. The group of single cone obturation using canal preparation of GT$^{TM}$ rotary files and Gates Glidden drill showed more apical leakage than the group of lateral condensation using same shaping method with-out statistical significance (p＞0.05).

• Restorative Dentistry and Endodontics
• /
• 제43권2호
• /
• pp.15.1-15.7
• /
• 2018

Objectives: The present study aimed to evaluate the shaping ability of 2 thermally treated nickel-titanium reciprocating systems in simulated curved canals. Materials and Methods: Forty simulated canals were prepared to apical size 25 using Reciproc Blue R25 (VDW) and WaveOne Gold Primary (Dentsply Sirona) instruments. Standard pre- and post-preparation images were taken and superimposed. The removal of resin material was measured at 5 standard points: the canal orifice, halfway between the canal orifice and the beginning of the curve, the beginning of the curve, the apex of the curve, and the end-point of the simulated canal. The data were analysed using the independent sample t-test with a 5% significance threshold. Results: The canals in which Reciproc Blue R25 was used showed a significantly greater widening than those in which WaveOne Gold was used at 4 of the 5 measurement points (p < 0.05). The Reciproc Blue R25 instrument removed significantly more resin from the inner aspect of the curve at 2 of the 5 points and similar amounts at the remaining 3 points. At the 2 apical points, there was no significant difference between the Reciproc Blue R25 and WaveOne Gold Primary instruments. Conclusion: Both instruments respected the original canal anatomy; however, WaveOne Gold resulted in a more conservative shape with less transportation.

• 한국음향학회지
• /
• 제8권5호
• /
• pp.33-50
• /
• 1989

본 논문에서는 비선헝 왜곡법을 사용하여 악기음을 합성하였다. 비선형 왜곡법은 기본적으로 하나의 정현파 발생기와 이에 의해 발생된 정현파에 인위적인 왜곡을 일으키는 증폭기로 구성된다. 출력파는 비선형 증폭기의 전달함수, 즉 파형 형성 항수를 변화시킴으로써 제어되는 배음을 갖는다. 파형 형성 함수는 녹음된 악기음을 분석하여 얻어진 각 부분음 크기를 바탕으로 체비세프 다항식을 이용하여 얻어진다. 합성 시스템은 IBM-PC에서 수행되는 프로그램이며, 합성 결과는 파형과 스펙트럼 분석기에 의한 스펙트럼으로 보였다. 또한 합성 결과의 검증을 위해 전문가를 대상으로 시청 테스트를 수행하여, 합성음의 만족도를 평가하였다.

• Journal of Power Electronics
• /
• 제9권2호
• /
• pp.173-179
• /
• 2009

This paper proposes a new three-phase diode rectifier system with a sinusoidal input current at unity power factor and a regulated and isolated output voltage at low level. The inherent natural wave-shaping capability of the reduced kVA polyphase transformer together with an active current wave-shaping technique results in a significant reduction of input and output filter requirements associated with switching ripple and EMI. The operation principles are described along with a design example and a comparative evaluation. Experimental results on a 1.5kW prototype are provided to validate the proposed concept.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2008년도 동계학술발표회 논문집
• /
• pp.409-410
• /
• 2008

• 구강회복응용과학지
• /
• 제30권2호
• /
• pp.121-130
• /
• 2014

목적: Reciprocating 파일인 WaveOne과 continuous rotary 파일인 ProTaper와 ProFile로 근관 형성시 상아질 벽의 표면성상과 상아질 삭편 크기와 도말층 제거 효과를 비교하였다. 연구 재료 및 방법: 60개 단근치를 ProFile, ProTaper, WaveOne으로 성형 후 근관이 보이도록 grinding 하였다. 근관 성형 동안 상아질 삭편을 모아 건조하였다. Scanning electron microscope으로 상아질 삭편 크기와 근관 표면의 불규칙성과 도말층을 관찰하였다. 결과: 표면 함요부의 범위는 ProFile, ProTaper 그리고 WaveOne에서 $150{\mu}m$, $70{\mu}m$, 그리고 $80{\mu}m$의 범위 내에서 관찰되었다. 상아질 삭편의 크기는 ProFile, ProTaper 그리고 WaveOne에서 $7{\mu}m$, $6.5{\mu}m$, 그리고$4{\mu}m$의 범위 내에서 관찰되었다. 도말층은 WaveOne의 중간 1/3과 근단 1/3에서 유의하게 더 많이 관찰되었다. 결론: WaveOne은 중간 1/3과 치근단 1/3의 도말층 제거 효과를 제외하고, ProFile과 ProTaper와 근관 표면 성상과 상아질 삭편에서 큰 차이가 없는 것으로 사료된다.

• 대한전자공학회논문지
• /
• 제12권6호
• /
• pp.21-30
• /
• 1975

본 논문에서는 복소함수에 대한 최적설계 이론을 제안하여 연산회로, 파형성형회로, 여파기, 증폭기, 전송선로 등의 설계에 적용하여 본 결과, 실험치와도 잘 일치하였으며, 복소함수의 두가지 요소인 절대치와 위상을 동시에 고려한 회로망의 최적설계를 가능하게 하였으며, 또 여러 가지 상이한 회선정수를 포함하는 경우라도 설계가능하도록 무게함수의 선정 방법을 제시하였다. A method by which one can optimize the complex responses of electronic circuits has been suggested. represented in the complex forms, the optimization methods presented so far have dealt with real magnitude and phase responses of circuits. Design examples are shown on the optimal designs of an amplifier, filter, operational circuits transmission lines. and a wave-shaping circuit.

• 한국광학회지
• /
• 제9권2호
• /
• pp.104-110
• /
• 1998

Cu 도핑된(0.04 wt.%) 광굴절 (K/sub 0.5/Na/sub 0.5/)/sub 0.2/(Sr/sub 0.61/Ba/sub 0.39/)/sub 0.9/Nb/sub 2/O/sub 6/ 결정에서 두 빔간의 에너지 교환특성을 632.8 nm He-Ne 레이저 파장에서 해석하고 측정하였다. 또한 신호빔 혹은 기준빔이 고주파에서 진폭 변조될 때 광유기된 굴절율 부피 격자의 코히어런트한 2광파 결합 특성을 해석하고 실험하였으며, 코히어런트 광통신 시스템 및 광신호처리 분야에서 동적 광굴절 결합기및 펄스 shaping 소자로 활용하기 위한 예비 실험 결과를 제시했다.