• 한국해안해양공학회지
• /
• 제5권2호
• /
• pp.51-57
• /
• 1993

포텐셜 이론으로 구해지는 해저면 유속은 일반적으로 난류경계층에서의 파유속과 같다고 가정한다. 해저면 가까이에서 파운동에 의한 유속분포를 해석하기 위한 최근의 이론과 수치모형에서 발견되는 실험결과와의 오차는 주로 이 가정의 문제점으로부터 연유하는 것으로 사료된다. 경계층 최상점에서의 유속에 대한 이론치와 실유속치와의 관계식을 본고에서 제의하였다. 이 관계식을 이용하여 Jonsson(1967)과 Fredsoe(1984)가 각각 개발한 기존 이론식을 수정하였으며, 수정된 이론을 이용하여 파마찰계수를 산정한 결과, 발표된 실험치들과 비교하여 상당한 향상을 얻을 수 있었다.

• 한국안전학회지
• /
• 제24권1호
• /
• pp.37-42
• /
• 2009

The present study is to estimate the effect of wave height affecting at the front face of breakwater systems, when a submarine trench is dredged in the distant offshore from outer breakwater. The wave diffraction field, which is important hydraulic factor in the ocean, is considered to be two dimensional(2D) plane and the configuration of the submarine trench on the sea bed designated by single horizontal long-rectangular system. The numerical simulation is performed by using Green function based on the boundary integral equation and meshed at moving boundary conditions. The results of present numerical simulations are illustrated by applying the normal incidence. It is shown that the ratios of wave height reduction at the front face of breakwater systems are approximately 20% by the effect of placing long trench on the sea bed. This study can effectively be utilized for safety assessment to various breakwater systems in the ocean field.

• 한국한의학연구원논문집
• /
• 제17권3호
• /
• pp.87-96
• /
• 2011

Objectives : The study on the affected factor of the pulse wave is important in the pulse wave part. The purpose of this study is to secure the objective data of pulse-wave parameter on the food intakes affected the radial pulse-wave. Methods : The study was carried out healthy adult men. We researched the blood circulation index and the changes of the pulse factor according to 'before meal', 'right after meal', '30 minute after meal', '1 hour after meal' and '2 hours after meal'. We analyzed the changes according the time schedule. And analyzed the difference between 'before meal' and 'after meal'on the pulse-wave parameter. Results : The results were as follows. 1. HR, ECO and ECI were showed the highest increase 'after meal' and the significant decrease in '2 hours after meal' with 'before meal' degree. 2. In the pulse energy, 'left hand average pulse energy' was showed the highest increase 'after meal', and 'right hand average pulse energy' and 'right Quan(關)' were showed the highest increase in '30 minute after meal'. 3. h1 of '6 part of left and right hand'(Chon-Quan-Chuk, 寸關尺) was showed the significant difference statistically in 'left Chuk' and 'right Quan'. 4. T was showed the highest 'before meal' and the lowest after meal in '6 part of left and right' (Chon-Quan-Chuk, 寸關尺). 5. RAI was showed the highest 'before meal' in '6 part of left and right'(Chon-Quan-Chuk 寸關尺). Conclusions : From the about results, the food intakes was considered important factor of pulse formation. On the factor affected the pulse, we considered that continuous study needs for the future.

• 한국해안·해양공학회논문집
• /
• 제23권6호
• /
• pp.414-421
• /
• 2011

경사입사파 내습시 직립구조물의 마루높이 산정을 위해 기존 연구의 대부분은 입사각에 따른 월파량 저감계수를 제시하였다. 그러나 기존 연구에서 파랑증폭과 월파의 공간적 분포는 고려하지 않았다. 본 연구에서는 직립구조물을 따른 파랑 증폭현상에 의한 월파의 공간적분포를 실험적으로 검토하였다. 실험결과에 의하면, 직립구조물 시점으로부터 유의파 파장 기준 3파장까지 구간은 직각입사와 동일한 방법으로 마루높이를 산정하고, 그 이후 구간에 대해서는 파랑의 증폭과 월파의 공간적 분포를 고려한 월파량 저감계수를 사용하는 것이 합리적인 것으로 검토되었다.

• 한국해안해양공학회지
• /
• 제14권2호
• /
• pp.95-107
• /
• 2002

신뢰성설계법의 적용성을 확대하기 위하여 혼성제 직립 케이슨의 활동에 대한 신뢰성 해석이 수행되었다. 충격쇄파 효과를 고려한 결정론적 설계법에 의하여 단면의 안전성이 자세히 해석되었으며, 특히 신뢰성 해석의 결과를 직접 결정론적 설계법의 결과와 연결시키기 위한 연구가 시도되었다. 해석 결과에 의하면 현재의 결정론적 설계 법에서 적용되고 있는 안전율은 약간 안전 측에 속한다. 또한 동일한 입사조건과 안전율에 대하여 수심이 증가함에 따라 신뢰지수는 감소하는 경향을 보이고 있다. 한편 방파제가 그 기능을 수행하는데 지장이 없을 것으로 예상되는 목표 파괴확률을 설정하고 그 목표 범위내에서 가장 최적의 파괴 확률을 산정하였는데, 입사조건에 따라 약간 씩 다른 최적의 안전율이 추정되었다. 마지막으로 혼성제 케이슨의 단면 결정에 영향을 주는 변수들의 변화에 따른 민감도 분석이 수행되었다. 해석 결과에 의하면 입사각, 주기의 영향이 크게 나타났으며 하상의 경사나 마운드의 두께에 대한 영향의 정도는 상대적으로 낮게 평가되었다.

• 대한전기학회논문지
• /
• 제38권11호
• /
• pp.896-904
• /
• 1989

PWM techniques which eliminate and reduce harmonics of output voltage in PWM Inverter driving System with fluctuating input volotage are described. First, harmonic factors are analyzed from harmonic equation of general PWM waveform and by examination of control possiblity of each factor, controllable factor is selected. Applying controllable factor to NPWM, PWM techniques using reference wave and carrier wave modulation are introduced. Actually, by the experiment applied with this strategy, the reduction of harmonics of output voltage is confirmed.

• Journal of Magnetics
• /
• 제6권2호
• /
• pp.43-46
• /
• 2001

The reflection-amplitude approximation is used to calculate the interlayer exchange coupling in (001) Co/Cu/Co multilayers. The dependence of the phase factor of the reflection amplitude on the energy and wave vector is included. The contribution of each period is calculated and the results are compared with those from asymptotic behavior. It is shown that the energy and wave-vector dependence of the phase factor may affect the interlayer exchange coupling significantly.

• 대한기계학회논문집B
• /
• 제22권11호
• /
• pp.1555-1563
• /
• 1998

Heat transfer and pressure drop for ${\phi}10.07$ dry surface fin-tube heat exchanger with wave and wave-slit fins were measured for different fin spacings and number of tube rows. Longitudinal and transverse tube spacings of the heat exchangers are 21.65mm and 25mm respectively, and wave depth of wave fin is 1.5mm. The experiments were performed for 4 different fin spacings, 1.3, 1.5, 1.7 and 2.0mm, and the number of tube rows were 1,2 and 3 rows. The present results were compared with the previous results for the wave depth of 2mm. Also hydrophilic coated and bare fins were tested. Correlations for Colburn j-factor and friction factor were developed.

• 수산해양기술연구
• /
• 제16권1호
• /
• pp.43-47
• /
• 1980

The author designed and tested the high sensitive three-phase power factor meter and relay circuit, and dealt with the circuit to detect the phase of the current and the voltage. An operational amplifier comparator circuit and two single-phase transformers are used to control and detect the phase angle between the current and the voltage. The results obtained are as follows: 1. Converting the sine wave input current into the constant amplitude rectangular wave form by using a transistor chopper circuit, the power factor can be measured precisely over the load current of 0.08 A. 2. Using the moving coil type current meter, the power factor meter can be read in uniform . scale all over the range. 3. Using the three-phase power factor meter, the power factor relay which works at any power factor can be made.

• 한국해양공학회지
• /
• 제29권1호
• /
• pp.62-69
• /
• 2015

Coastlines are protected by breakwater structures against the erosion of sand or other materials along beaches due to wave action. This research examined the use of physical modeling to determine the effects of the tetrapod size and vertical walls of a rubble mound on the volume of wave overtopping under irregular wave conditions in coastal areas in Busan Yacht Harbor. In this analysis model, the structures were studied using irregular waves and the JONSWAP wave energy spectrum. To understand the effects of the tetrapod size and heights of the vertical wall, the study considered vertical walls of 0, 1.78, 6.83, and 9.33 cm with armor double layered material tetrapods of 8, 12, 16, and 20 tons. An extensive number of experiments covering a relatively large range of variables enabled a comprehensive discussion. First, in the presence of a short vertical wall, the water level played a key role in the overtopping discharge. In such circumstances, the values of the wave overtopping discharge decreased with increasing freeboard size. In the presence of a tall freeboard and middle, the value of the wave overtopping discharge was equally influenced by the vertical wall factor. Moreover, the tetrapod size decreased by an increase in the vertical wall factor, and relationship between them resulted in a short wall height. From an engineering point of view, considering a small water level may allow the choice of a shorter vertical wall, which would ultimately provide a more economical design.