• Structural Engineering and Mechanics
• /
• v.20 no.6
• /
• pp.655-672
• /
• 2005

Seismic random responses due to the wave passage effect are extensively investigated by using the pseudo excitation method (PEM). Two examples are used. The first is very simple but also very informative, while the second is a realistic suspension bridge. Numerical results show that the seismic responses vary significantly with wave speed, especially for low velocity or large span. Such variations are not monotonic, especially for flexible structures. The contributions of the dynamic and quasi-static components depend heavily on the seismic wave velocity and the natural frequencies of structures. For the lower natural frequency cases, the dynamic component has significant effects on the dynamic responses of the structure, whereas the quasi-static component dominates for higher natural frequencies unless the wave speed is also high. It is concluded that if insufficient data on local seismic wave velocity is available, it is advisable to select several possible velocity values in the seismic analysis and to choose the most conservative of the results thus obtained as the basis for design.

• Restorative Dentistry and Endodontics
• /
• v.44 no.2
• /
• pp.22.1-22.8
• /
• 2019

Objectives: The aim of this study was to investigate the effect of glide path preparation with PathFile and ProGlider nickel-titanium (NiTi) files on the cyclic fatigue resistance of WaveOne NiTi files. Materials and Methods: Forty-four WaveOne Primary files were used and divided into four groups (n = 11). In the first group (0 WaveOne), the WaveOne Primary files served as a control group and were not used on acrylic blocks. In the 1 WaveOne Group, acrylic blocks were prepared using only WaveOne Primary files, and in the PF+WaveOne group and PG+WaveOne groups, acrylic blocks were first prepared with PathFile or ProGlider NiTi files, respectively, followed by the use of WaveOne Primary files. All the WaveOne Primary files were then subjected to cyclic fatigue testing. The number of cycles to failure was calculated and the data were statistically analyzed using one-way analysis of variance (ANOVA) and the Tukey honest significant difference multiple-comparison test at a 5% significance level. Results: The highest number of cycles to failure was found in the control group, and the lowest numbers were found in the 1 WaveOne group and the PF+WaveOne group. Significant differences were found among the 1 WaveOne, PF+WaveOne, and control groups (p < 0.05). No statistically significant differences were found between the PG+WaveOne group and the other three groups (p > 0.05). Conclusion: Glide path preparation with NiTi rotary files did not affect the cyclic fatigue resistance of WaveOne Primary files used on acrylic blocks.

• Journal of Navigation and Port Research
• /
• v.28 no.1
• /
• pp.97-104
• /
• 2004

Introduction of wave model, take into account the effect of tide, wind and wave induced currents at the coastal waters of complex bathymetry, is a very important factor for most coastal engineering design and disaster protection problems. As the steady state spectral wave model could simulate depth induced wave shoaling and refraction, current induced refraction effect, steepness induced wave breaking, diffraction, wind wave growth, wave-wave interaction, and wave-current interaction that redistribute energy, this would support and compensate the gap in the real field of design where other wave models could not deal and cause wrong estimation. In this study, for better understanding and analysis of wave transformation process, we applied the spectral wave model to the large coastal waters near Gaduck Island where the Busan new port construction project is going on. We also compared the simulation results with the calculatea from the existing model. From such a trial of this study, we hope that broader and safer use of the spectral model in the area of port design and disaster prevention system come through in near future.

• Journal of Ocean Engineering and Technology
• /
• v.9 no.2
• /
• pp.75-82
• /
• 1995

The free surface effects on the aerodynamic performance of 2-D wings are investigated based on the potential flow approximation. The wing is represented b source and vortex distributions on the wing surface. The steady free surface effect is taken into account by source distribution on the free surface and the velocity potentials of air and water flows are obtained. Using three different techniques, namely, positive image method, inverse image method and source distribution method, numerical results are obtained for wave elevation, pressure distribution and lift coefficient with various foil sections. The wave elevation calculated by the inverse image method is shown to be very small even at higher speeds so that the free surface effect on the performance of wings is regraded negligible. However, the wave elevations by the positive image method and source distribution method are relatively high at higher speeds and accordingly the free surface effects on wings can not be neglected.

• Journal of Ocean Engineering and Technology
• /
• v.16 no.5
• /
• pp.1-6
• /
• 2002

Extreme waves are generated in a model basin based on directional wave focusing. The targeted wave field is described by double summation method and it is applied to serpent-type wavemaker system. The extreme crest amplitude at a designed location is obtained by syncronizing the phases and focusing the directions of wave components. Two distinguished spectrums of constant wave amplitude and constant wave steepness are adapted to describe the frequency distribution of component waves. The surface profile of generated wave packets is measured by wave guage array and the effects of dominant spectral parameters governing extreme wave characteristics are investigated. It is found that frequency bandwidth, center frequency, shape of frequency spectrum and directional range play a significant role in the wave focusing. In particular, the directional effect significantly enhances the wave focusing efficiency.

• Geophysics and Geophysical Exploration
• /
• v.9 no.2
• /
• pp.148-154
• /
• 2006

The effect of small-scale near surface inhomogeneity on Rayleigh wave propagation and dispersion has been investigated in this study using two-dimensional FEM elastic modeling. Various inhomogeneity models with a variety of geometrical shape and embedment depth which exist in homogeneous half-space and two-layered media are considered. Results show that any near surface inhomogeneity greater than one wavelength in terms of minimum wavelength of Rayleigh wave shows dispersion characteristics. Such dispersion effect become stronger as the dimensions of the inhomogeneity increase. The effect of horizontal dimension is more dominant factor governing the dispersion characteristics than vertical dimension. However, the dispersion effect can not be identifiable in seismogram if the horizontal dimension is not wide enough. Nonetheless, even in this case, the existence of inhomogeneity can be inferred by the reflection or transmission event of Rayleigh wave. The results can be expected to provide insights on the behavior of Rayleigh wave which may be helpful for designating field work or new processing scheme to detect near surface inhomogeneity by surface wave method.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.4
• /
• pp.355-367
• /
• 2004

The heat transfer and friction characteristics of the heat exchangers having sinusoidal wave fins were experimentally investigated. Twenty-nine samples having different waffle heights (1.5 mm and 2.0 m), fin pitches (1.3mm to 1.7mm) and tube rows (one to three) were tested. Focus was given to the effect of the waffle configuration (herringbone or sinusoidal) on the heat transfer and friction characteristics. Results show that the sinusoidal wave geometry provides higher heat transfer coefficients and friction factors than the herringbone wave geometry, and the difference increases as the number of row increases. The i/f ratios of the herringbone wave geometry, however, are larger than those of the sinusoidal wave geometry. Compared to the herringbone wave geometry, the sinusoidal wave geometry yielded a weak row effect, which suggests a superior heat transfer performance at the fully developed flow region. Possible explanation is provided considering the flow characteristics in wavy channels. Within the present geometric range, the effect of the waffle height on the heat transfer coefficient was not prominent. The effect of the fin pitch was also negligible. Existing correlations highly overpredicted both the heat transfer coefficients and friction factors. A new correlation was developed using the present data.

• Journal of Korea Trade
• /
• v.23 no.8
• /
• pp.45-72
• /
• 2019

Purpose - This study examines the mediating effect of switching costs (economic risk costs and setup costs) on the relationships of country image with product attitude and product attachment. Switching-cost effects for the Korean Wave, which are insufficiently addressed in the literature, were investigated using the country image of Korea as a proxy for the Korean Wave. Moreover, this study examined the economic effects of the Korean Wave and the negative effect of the Terminal High Altitude Area Defense (THAAD) deployment on these economic effects. Design/methodology - A total of 302 Chinese consumers were surveyed using a questionnaire. Because this was an exploratory study and was not based on a classical model, the PLS-SEM method was employed to test the stability of the model and its hypotheses. Findings - Switching costs had mediating effects on the relationships of country image with product attitude and product attachment. The switching-cost effects for the Korean Wave were verified. However, neither the economic image nor cultural image of Korea had significant effects on the economic risk costs. Moreover, the economic image of Korea had no significant effect on the set-up costs. Originality/value - This study broadened the understanding of the relationships among country image, switching costs, product attitude, and product attachment and advanced the knowledge of relevant theories. The results contribute theoretically to the literature on switching-cost effects for the Korean Wave. The results confirmed the negative effect of THAAD deployment on the economic effects of the Korean Wave. In the rapidly developing international environment, these research results could serve as theoretical reference guidelines for suppliers when developing marketing strategies.

• The Journal of the Korea Contents Association
• /
• v.19 no.5
• /
• pp.296-305
• /
• 2019

With the growth of the Korean Wave and the importance of the fandom economy, it is necessary to consider the competitiveness of the Korean Wave with its fandom viewpoint. Particularly, the fandom phenomenon shows the characteristics of identifying the favorite star and actively acquiring and sharing related information in the fan community. Therefore, in this study, we examined the influence of Korean national image on consumers' intention to use Korean contents, and examined the mediating effects of fandom identification among Chinese, Japanese and Vietnamese consumers. As a result of the empirical analysis, cultural image, corporate image, and product image were found to have statistically significant influence on the intention to use Korean Wave contents. In addition, star identification and pan community identification showed partial mediation in the effect of cultural images on the intention to use Korean contents. The results of this study suggest that the Korean Wave is a leading factor for the continuous development of Korean Wave, not the halo effect point for improving the national image, and the mediating effect of the fandom phenomenon is tested empirically.

• Asia-Pacific Journal of Business
• /
• v.12 no.4
• /
• pp.1-12
• /
• 2021

Purpose - This study is an empirical study on the relationship of Thai consumers' attitude toward Korean Wave with the visit intention of Korean restaurants and a mediation effect of consumption value of Korean restaurants. Design/Methodology/Approach - Data were collected using a structured questionnaire of 245 Thai consumers and the hypotheses presented were verified by regression analysis and structural equation models. Findings - As a result of the empirical analysis, it was found that the higher the attractiveness and favorableness of Thai consumers for K-Wave, the higher the intention to visit Korean restaurants, and the Korean Wave attitude have a positive effect on the functional and symbolic values of Korean restaurants. In particular, the important result that can be presented in this study is that the better the attitude toward K-Wave, the higher the consumption value (functional/symbolic value) of Korean restaurants and the symbolic value plays a significant mediating effect on the relationship of the attitude of K-Wave and visiting intention, while the effect of functional value is not verified. Research Implication or Originality - These results means that in order to lead Thai consumers to a Korean restaurant using K-Wave, a strategy to make Thai ones perceive symbolic value of a Korean restaurant higher would be more effective. The main strategic implication of this study is that a high-end positioning strategy with a high symbolism, which make Korean restaurant as a suitable place as a means to show off one's value (or self) or as a means to show off one's social status (or role) to Thai consumers, will be relatively effective.