• 대한전자공학회논문지
• /
• 제12권3호
• /
• pp.13-19
• /
• 1975

CuCl, KDP 결정체를 이용한 지그재그형 진헹파 전기광학적 레이저 변조기에 대해 자세히 해석했다. 변조기와 크기와 대역폭은 변조용 결정체의 광학적 특성및 M/W유전특성에 의해 결정됨을 알수 있다. 더욱 광손실과 M/W손실의 영향, 입사각, 회절등의 영향을 규명했고 최적 설계법을 제시했다. 중요한 결과를 요약하면 다음과 같다. (1) CuCl, KDP로 10(GHz)이상의 대역폭에서 3(watt)이하의 변조전력으로 50%변조를 얻었다. (2) 변조주파수 한계의 상한은 레이저 빔폭에 의한 차단주파수로 인해 제한된다. A detailed analysis has been carried out of a zigzag traveling wave electro-optic laser modulator usin3 CuCl, KDP Crystal. The inclusion of such practical factors as M/W and optical loss results in an optimum design in which modulator dimensions and bandwidth limitation are uniquely determined by optical and M/W dielectic properties of modulating crystal. The main conclusion of the analysis are: (1) CuCl, KDP may be used to produce 50% modulation over bandwidth of 10(GHz) with less than (watt) of modulating power. (2) The upper modulation frequency limit is set by a cutoff frequency which arises from finite width of optical beam.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.1142-1145
• /
• 2004

ZnO surge arresters continuously endure the operating voltages during the operation course, and in the mean time, which need to withstand occasionally transient voltages of lightning and switching overvoltages. Under these voltages, the ZnO varistors inside arresters would have aging phenomena, one important result of aging phenomena is the increasing of resistive currents of varistors, which leads to the increasing of power losses of varistors. And the operating voltage is continuously applied on the ZnO varistors, there is a degradation phenomenon existing in ZnO varistors. When the degradation reaches a certain degree, then the arrester must stop operation. The degradation is related to the applied voltage ratio, the applied voltage ratio is high, the degradation is quickly. When the power loss is higher than the thermal dispersion ability of house of arrester, then the arrester will thermally breakdown. In this study the thermal stability characteristics of surge arresters for high power wil be discussed on the view point of watt losses and thermal breakdown.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 하계학술대회 논문집
• /
• pp.236-238
• /
• 1990

For improving magnetic properties of the amorphous Fe-B-Si alloy, we annealed in a magnetic field oriented in the plane of the ribbon longitudinal to its long axis. By field annealing, coercive force and total core loss are reduced from 0.04 Oe to 0.02 Oe, and from 0.25 watt/kg to 0.15 watt/kg respectively comparing with non-field annealed specimen. These reductions were caused by the formation of $180^{\circ}$ domains parallel to the annealing field due to the induced anisotorpy.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 학술대회 논문집
• /
• pp.333-337
• /
• 2005

We have studied the loss characteristics of the electronic ballast for the 250 watt HID lamps. The researched electronic ballast has a low loss, a low THD for input current and the other reliable characteristics. By the experrimental results and the analytical method, we concluded that the switching devices loss is 33%, and the Inductances loss is 42.6% of the total losses.

• 한국자동차공학회논문집
• /
• 제16권4호
• /
• pp.47-55
• /
• 2008

Turbocharger has a main purpose on recycling of the exhaust gas from the engine cylinder. On the basis of the facility characteristics, the turbocharger supported on floating ring bearings has some problems such as the large volume, oil supplement for lubrication and high power loss due to high operating torque. The air foil bearing has been studied as the bearing element to be able to alternate the floating ring bearing without the problems of the floating ring bearing. In this study, the air foil bearing has 2 parts; journal and thrust bearings, and the test facility consists of the engine, exhaust and intake parts. In addiction, the specification of the turbocharger follows a small turbocharger for SUV engine. The engine speed is varied from 750 (idle rpm) to 2,500 rpm and then, the rotating speed of the turbocharger rotor is accelerated from 0 to 100,000 rpm. From those experiments, the comparison between the performances of the air foil bearing and floating ring bearing is conducted and the results show that the air foil bearing has less power loss, maximum 770 watt, than the floating ring bearing, maximum 5,110 watt. This result verifies that the air foil bearing is more efficient and able to output more power under the same condition of the input power.

• 한국전자파학회논문지
• /
• 제22권8호
• /
• pp.805-808
• /
• 2011

본 논문에서는 220 V의 AC 전원을 공급받아 13.56 MHz의 RF 신호를 출력하는 고효율, 고출력 Class E 전력송신기를 설계하였다. 송신기는 AC-DC 변환기와 class E 전력 증폭기로 구성된다. 설계된 AC-DC 변환기는 220V/60 Hz의 가정용 전원을 공급 받아서 약 290 V의 DC 전압을 출력한다. 이때, AC-DC 변환기는 98.03 %의 매우 높은 변환 효율을 가진다. 변환 효율을 최대로 하기 위하여 별도의 DC-DC 변환기를 사용하지 않고, AC-DC 변환기의 출력 전압을 주 전력 증폭기의 드레인 바이어스 전압으로 사용하였다. 또한, class E 전력 증폭기의 전력손실을 최소화하기 위해 high-Q 인덕터를 제작하였다. 측정 결과, 13.56 MHz에서 동작하는 class E 전력 증폭기는 최대 출력 전력 323.6 Watt에서 84.2 %의 PAE(Power-Added Efficiency)를 가진다. AC-DC 변환기를 포함한 class E 전력 송신기는 323.6 Watt에서 82.87 %의 매우 높은 효율 특성을 나타낸다.

• Computers and Concrete
• /
• 제17권3호
• /
• pp.305-322
• /
• 2016

The work is intended to demonstrate that the loss of bond between concrete and flexural steel which led in recent years a number of flat-slab structures to punching collapse under service loading conditions is also relevant to ultimate limit-state design. It is based on a comparative study of the results obtained from numerical experiments on flat slab-column sub-assemblages. The slabs were designed for punching either in compliance with the EC2 code requirements, which do not allow for such loss of bond, or in accordance with the compressive force-path method which considers the loss of bond between concrete and the flexural reinforcement in tension as the primary cause of punching. The numerical experiments are carried out through the use of a nonlinear finite element analysis package for which, although ample published evidence of its validity exists, additional proof of its suitability for the purposes of the present work is presented.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2537-2540
• /
• 2001

The purpose of this study is to examine the calculated method of loss characteristics of full-bridge eletronic ballast for 250Watt HID lamps by approximated modeling. These lamps have the most emit effiency and color rendering. Especially, the majority of losses appear to the MOSFET do full-bridge, L of output terminal and driver IC, besides losses occur to the R in the ballast. These losses cause heating and breakage of MOSFET. When HID-lamp arrivals the steady-state, loss of ballast is measured 9% and analyzed value is 8% approximately. Accordingly it is not too much to say that greater part of losses is examined.

• 한국염색가공학회지
• /
• 제10권6호
• /
• pp.1-9
• /
• 1998

The effects of oxygen plasma treatments at different discharge power, reaction pressure, treatment time on yellowing of polyester fabrics were studied. Surface characteristics of the treated fabrics were also investigated by means of SEM and ESCA. The results were as follows : The yellowing of fabrics increases as the power and the treatment time are increased, and decreases as the pressure is increased. The plasma treatment of 100 Watt, 200 mTorr, 5 min. is the optimal condition which is most effective in holding whiteness as well as high weight loss of fabrics.

• 전자공학회논문지A
• /
• 제30A권10호
• /
• pp.27-32
• /
• 1993

Separate-confinement hetero-structure (SCH) broad area Laser Diodes (LD's) were fabricated from $Al_{0.07}$Ga$_{0.93}$/. As single-quantum-well (SQW) grown by metal organic chemical vapor deposition (MOCVD). Under pulsed operation, we obtained maximum output powers of about 0.8watt/facet and 1.83watt/facet from LD's with 60$\mu$m and 160$\mu$m channel width, respectively, without facet coatings. The differential quantum efficiency of the 60$\mu$m wide LD was about 21.7%/facet and its threshold current density was about 1k [A/cm$^{2}$]. The differential quantum efficiency of the 160$\mu$m wide LD was about 25.6%/facet and its threshold current density was about 1k[A/cm$^{2}$]. The minimum threshold current density of 60$\mu$m wide LD's was 620[A/cm$^{2}$] when the cavity length was 603$\mu$m and the minimum threshold current density of 160$\mu$m wide Ld's was 675[A/cm$^{2}$] when the cavity length was 752$\mu$m. The internal quantum efficienty and the internal loss of both LD's were 92.3% and 18.1cm$^{1}$, respectively.