• Membrane and Water Treatment
• /
• 제14권3호
• /
• pp.115-120
• /
• 2023

The design theory for nanoporous filtration membranes needs to be established. The present study shows that the performance and technical advancement of nanoporous filtration membranes are determined by the fundamental parameter I (in the unit Watt^1/2) which is formulated as a function of the shear strength of the liquid-pore wall interface, the radius of the filtration pore, the membrane thickness, and the bulk dynamic viscosity of the flowing liquid. This parameter determines the critical power loss on a single filtration pore for initiating the wall slippage, which is important for the flux of the membrane. It also relates the membrane permeability to the power cost by the filtration pore. It is shown that for biological cellular membranes its values are on the scale 1.0E-8Watt^1/2, for mono-layer graphene membranes its values are on the scale 1.0E-9Watt^1/2, and for nanoporous membranes made of silica, silicon nitride or silicon carbonized its values are on the scale 1.0E-5Watt^1/2. The scale of the value of this parameter directly measures the level of the performance of a nanoporous filtration membrane. The carbon nanotube membrane has the similar performance with biological cellular membranes, as it also has the value of I on the scale 1.0E-8Watt^1/2.

• Membrane and Water Treatment
• /
• 제12권1호
• /
• pp.37-41
• /
• 2021

This paper presents the multiscale calculation results of the very fast volume transport in micro/nano cylindrical tubes with the wall slippage. There simultaneously occurs the adsorbed layer flow and the intermediate continuum fluid flow which are respectively on different scales. The modeled fluid is water and the tube wall is somewhat hydrophobic. The calculation shows that the power loss on the tube no more than 1.0 Watt/m can generate the wall slippage even if the fluid-tube wall interfacial shear strength is 1 MPa; The power loss on the scale 104 Watt/m produces the volume flow rate through the tube more than one hundred times higher than the classical hydrodynamic theory calculation even if the fluid-tube wall interfacial shear strength is 1 MPa. When the wall slippage occurs, the volume flow rate through the tube is in direct proportion to the power loss on the tube but in inverse proportion to the fluid-tube wall interfacial shear strength. For low interfacial shear strengths such as no more than 1 kPa, the transport in the tube appears very fast with the magnitude more than 4 orders higher than the classical calculation if the power loss on the tube is on the scale 104 Watt/m.

• Journal of the Korean Wood Science and Technology
• /
• 제23권1호
• /
• pp.35-41
• /
• 1995

Persimmon boards of 30mm thick were dried, their temperatures were monitored during drying with 490 and 200watt microwave, and the drying efficacy and problems were investigated. The effects of pretreatments such as presteaming and prefreezing were also examined. The persimmon green lumbers of 80% moisture content were dried to 10% for only 50~60 and 110 minutes with 49watt and 200watt microwave, respectively. Severe internal checks were, however, found in all boards. The presteamed boards collapsed on their surfaces earlier than the controls. It may attribute to the high temperature inside boards during microwave drying and the decrease of their internal tensile strength caused by the presteaming treatment. To increase the internal tensile strength of the pretreated boards and to reduce their internal checks, they were air-dried at room temperature. The air-dried boards could be dried to 10% moisture content clearly and free from defects with 200watt microwave. The heating efficiency were also calculated with the maximum weight loss per minute of 490watt and 200watt.

• 한국항해항만학회지
• /
• 제27권5호
• /
• pp.505-511
• /
• 2003

본 논문에서는 UHF(470∼806 MHz) 대역에서 전송장치로 사용 가능한 DTV 중계기용 1 Watt 급 구동증폭단을 설계 및 제작하였다. 구동증폭단은 유전율 2.53, 두께 0.8 mm 기판을 사용하여, 전치증폭기 및 1 Watt 단위증폭기를 단일기판상에 집적화 하였다. 바이어스 전압 28 V DC, 전류 900 mA를 구동증폭단에 인가하였을 때, 470∼806 MHz의 대역에서 53.5 dB 이상의 이득, $\pm$0.5 dB의 이득 평탄도 및 -12 dB 이하의 입ㆍ출력 반사손실이 나타났다. 또한 출력전력이 1 Watt일 때 사용주파수 대역에서 2 MHz 주파수 간격의 두 신호를 구동증폭단에 입력하여 설계사양보다 우수한 48 dBc 이상의 상호변조왜곡 특성이 나타남을 알 수 있었다.

• 대한전기학회논문지
• /
• 제40권1호
• /
• pp.67-72
• /
• 1991

For improving the magnetic properties of the amorphous Fe-B-Si alloy, we annealed the sample in a magnetic field oriented in the plane of the ribbon longitudinal to its long axis. By field annealing, coercive force and total core loss are reduced from 0.04 Oe to 0.02 Oe, and from 0.25 watt/kg to 0.15 watt/kg respectively in comparsion with non-field annealed specimen. These reductions were caused by the formation of 180 dcmain wall parallel to the annealing field due to the induced anisotropy.

• 산업경영시스템학회지
• /
• 제39권3호
• /
• pp.39-46
• /
• 2016

Loss of postural stability can possibly lead to slip and fall accidents in the number of workplaces and everyday life. This study was aimed to examine the effects of whole body fatigue and partially limited visual field on the ability of maintaining postural balance during quiet standing. A group of twelve healthy male subjects participated in the experiment. Before and after experiencing the whole body fatigue induced by bicycling exercises, the position coordinates of subject's center of pressure (COP) were obtained under the two levels of visual field condition (i.e., open visual field and limited visual field). Four levels of the whole body fatigue examined were rest, 300watt, 600watt, and 900watt. Position coordinates of COPs measured on a force plate were then converted into the total length of postural sway path in both the medio-lateral (ML) direction and the anterior-posterior (AP) direction. Two-way ANOVA result showed that the length of sway path in the AP direction became significantly larger as the whole body fatigue accumulated. Post-hoc test revealed statistically significant differences between rest and 900watt and between 300watt and 900watt. The significant increase of the sway length was also found when the visual field was partially obstructed by the boxes. In the ML direction, however, there was no statistically significant difference of the postural sway in both the AP and ML directions. The results imply that the ability of maintaining postural stability can be reduced significantly due to such tasks along with whole body fatigue. The postural balance can also be impaired by the limited visual field.

• 한국항해항만학회지
• /
• 제26권2호
• /
• pp.215-220
• /
• 2002

본 논문에서는 DTV 중계기용 Temperature Independent Biasing을 이용한 100 watt급 단위 전력증폭기를 설계한 후, 제작하였다. $20^{\circ}C$에서 $100^{\circ}C$까지의 온도변화에 대하여 단위 전력증폭기의 DC 동작점은 능동 바이어스에 의해서 고정되며, 증폭기의 소모전류의 변화량이 0.6A 이하의 우수한 특성을 얻었다. 제작된 단위 전력증폭기는 12dB 이상의 이득, $\pm$0.5dB 이하의 이득 평탄도, DTV 중계 주파수범위(470-806 MHz)에 걸쳐 15dB 이하의 입.출력 반사손실을 나타내었다. 100 Watt 단위 전력증폭기는 출력 전력이 100 watt일 때 2MHz의 오프셋에서 32dBc 이상의 상호 변조 왜곡(IMD)을 나타내었다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2063-2066
• /
• 2005

This paper presents an approach to detect the dielectric condition of FRP Hot Stick in EHV high voltage cable whereas shutting down the power system is not necessary. The radio frequency generating method is adopted by transmitting radio wave into the Electrodes. This instrument is small, easy to use and also inexpensive. Furthermore, the impurity level of dirt on high voltage insulator (non-ceramic type) will be analyzed by using the methods based on IEEE Std.978-1984 at 105 kV.DC. /305 mm. and OSHA Regulation 1910.269 Part J - live line tools. The frequency at 10-20 MHz is applied to FRP Hot Stick via Electrode1 and from FRP Hot Stick surface to Electrode 2. After that the results will be evaluated by testing in each condition of FRP Hot Stick, such as dry surface, hot surface, foil winding and conductor inserting. Finally, the watt loss will be examined and compared with the loss from humidity and Carbon tracking. The important components of this system are radio frequency generating unit, frequency stabilizing unit, frequency amplifier, FRP Hot Stick frequency counter, processing unit, and display unit.

• 조명전기설비학회논문지
• /
• 제12권2호
• /
• pp.121-128
• /
• 1998

새로운 형태의 자기식 형광등 안정기를 설계 개발하여 고효율화 성능시험을 수행하였다. 새로운 철심재료인 고성능의 G-9 재료를 사용하고, 철심구조와 모양을 개선하였고 코일의 동선을 짧고 굵은 것으로 대체하여 직류저항 성분을 줄여서 안정기 자체의 에너지 손실을 감소시켰다. 반도체형 점등회로를 대폭 개선하여 순간 점등을 가능하게 하고 형광램프의 사용수명연장, 화재방지 등을 할 수 있게 하였다. 안정기 자체의 에너지 감소가 1.7Watt, 형광등 조명광 향상이 7.6[%] 증가 등 큰 에너지 절약을 보였다. 본 연구결과는 형광등 안정기의 기술 향상과 국가 전력소비 절감효과 등 중요한 의미가 있다.

• 영어영문학
• /
• 제64권4호
• /
• pp.629-649
• /
• 2018

To date, one of the prevailing criticisms of Daniel Defoe's Robinson Crusoe has seen the adventure novel as a celebration of the rise of mercantile capitalism and the beginnings of colonialism. From this point of view, the Englishman has often been interpreted as an early embodiment of the concept of the sovereign economic subject. Prominent social critics who took up this interpretation have included Karl Marx, Max Weber, and Jean-Jacques Rousseau. Within literary studies proper, the work of Ian Watt offered perhaps the earliest version of this point of view of the novel. Influenced by both Weber and Rousseau, Ian Watt argued that Defoe's wandering protagonist embodies the rise of economic individualism. More recent criticism has tended to challenge this dominant interpretation by laying greater stress on such countervailing factors as Crusoe's mental uncertainty and inner conflict. Drawing inspiration from Fredric Jameson's diagnosis of the ills of late capitalism, this paper analyzes the ways in which Defoe's hero, rather than championing modern rationality, can in fact be seen as suffering from many forms of emotional psychosis. Robinson Crusoe can, after all, be better viewed as a contradictory multi-layered text that, despite its outward valorization of economic individualism, portrays its hero as a victim of negative capitalistic forces, a hero driven by his desire to possess but haunted by a fear of loss, a hero who flaunts inflated feelings of self-worth even as he reveals deflated notions of material insecurity and mental persecution.