• 제목/요약/키워드: Watt

검색결과 442건 처리시간 0.022초

Reduce on the Cost of Photovoltaic Power Generation for Polycrystalline Silicon Solar Cells by Double Printing of Ag/Cu Front Contact Layer

  • Peng, Zhuoyin;Liu, Zhou;Chen, Jianlin;Liao, Lida;Chen, Jian;Li, Cong;Li, Wei
    • Electronic Materials Letters
    • /
    • 제14권6호
    • /
    • pp.718-724
    • /
    • 2018
  • With the development of photovoltaic industry, the cost of photovoltaic power generation has become the significant issue. And the metallization process has decided the cost of original materials and photovoltaic efficiency of the solar cells. Nowadays, double printing process has been introduced instead of one-step printing process for front contact of polycrystalline silicon solar cells, which can effectively improve the photovoltaic conversion efficiency of silicon solar cells. Here, the relative cheap Cu paste has replaced the expensive Ag paste to form Ag/Cu composite front contact of silicon solar cells. The photovoltaic performance and the cost of photovoltaic power generation have been investigated. With the optimization on structure and height of Cu finger layer for Ag/Cu composite double-printed front contact, the silicon solar cells have exhibited a photovoltaic conversion efficiency of 18.41%, which has reduced 3.42 cent per Watt for the cost of photovoltaic power generation.

목표물 신호 모니터링 및 SPGD 알고리즘 기반 3 채널 타일형 결맞음 빔결합 시스템 연구 (3-channel Tiled-aperture Coherent-beam-combining System Based on Target-in-the-loop Monitoring and SPGD Algorithm)

  • 김영찬;윤영선;김한솔;장한별;박재덕;최윤진;나정균;이주한;강현구;여민수;최규홍;노영철;정윤찬;이혁재;유봉안;염동일;전창수
    • 한국광학회지
    • /
    • 제32권1호
    • /
    • pp.1-8
    • /
    • 2021
  • 단일 레이저의 출력 한계를 뛰어넘기 위한 빔결합 방법으로서, 보강간섭 원리를 이용한 타일형 결맞음 빔결합 시스템에 대해 연구하였다. 와트급 출력의 3 채널 결맞음 광섬유 레이저 및 삼각형 배치의 팁-틸트(tip-tilt) 기능을 갖춘 3 채널 출력단을 자체제작 하였다. 모니터링 시스템, 위상제어기, 3 채널 위상변조기 간의 궤환 제어 시스템(closed-loop system)을 구성하고 SPGD 알고리즘을 적용하여, 위상잠금 속도 5~67 kHz, 이상적인 계산값 대비 중심부 광세기 효율 53.3%의 성공적인 3 채널 위상잠금을 구현하였다. 빔결합 소자가 필요 없고, 가장 고출력 가능성을 가진 타일형 결맞음 빔결합을 위한 요소기술 개발이 완료되어, 향후 다채널, 고출력, 고속 제어 연구로 이어질 수 있을 것으로 기대된다.

A Comparative Study on Effective One-Group Cross-Sections of ORIGEN and FISPACT to Calculate Nuclide Inventory for Decommissioning Nuclear Power Plant

  • Cha, Gilyong;Kim, Soonyoung;Lee, Minhye;Kim, Minchul;Kim, Hyunmin
    • Journal of Radiation Protection and Research
    • /
    • 제47권2호
    • /
    • pp.99-106
    • /
    • 2022
  • Background: The radionuclide inventory calculation codes such as ORIGEN and FISPACT collapse neutron reaction libraries with energy spectra and generate an effective one-group cross-section. Since the nuclear cross-section data, energy group (g) structure, and other input details used by the two codes are different, there may be differences in each code's activation inventory calculation results. In this study, the calculation results of neutron-induced activation inventory using ORIGEN and FISPACT were compared and analyzed regarding radioactive waste classification and worker exposure during nuclear decommissioning. Materials and Methods: Two neutron spectra were used to obtain the comparison results: Watt fission spectrum and thermalized energy spectrum. The effective one-group cross-sections were generated for each type of energy group structure provided in ORIGEN and FISPACT. Then, the effective one-group cross-sections were analyzed by focusing on 59Ni, 63Ni, 94Nb, 60Co, 152Eu, and 154Eu, which are the main radionuclides of stainless steel, carbon steel, zircalloy, and concrete for decommissioning nuclear power plant (NPP). Results and Discussion: As a result of the analysis, 154Eu and 59Ni may be overestimated or underestimated depending on the code selection by up to 30%, because the cross-section library used for each code is different. When ORIGEN-44g, -49g, and -238g structures are selected, the differences of the calculation results of effective one-group cross-section according to group structure selection were less than 1% for the six nuclides applied in this study, and when FISPACT-69g, -172g, and -315g were applied, the difference was less than 1%, too. Conclusion: ORIGEN and FISPACT codes can be applied to activation calculations with their own built-in energy group structures for decommissioning NPP. Since the differences in calculation results may occur depending on the selection of codes and energy group structures, it is appropriate to properly select the energy group structure according to the accuracy required in the calculation and the characteristics of the problem.

개에서 전기제모술을 이용한 첩모중생의 치료 1례 (A case of distichiasis treatment using electroepilation in a dog)

  • 강명곤;한동현;한세명;정은겸;김경민;이신호;신윤주;강주빈;이동빈;고필옥;조재현;원청길;김충희
    • 한국동물위생학회지
    • /
    • 제45권4호
    • /
    • pp.325-330
    • /
    • 2022
  • Distichiasis is one of the diseases commonly encountered in companion animals, and these abnormal eyelashes cause corneal ulcers, continuous eye irritation, eye pain, glare, epiphora, foreign body sensation and can cause corneal opacity and vision loss in severe cases. In this study, an eyelash epilation needle for animals was developed and applied to a real case, and the results were observed. In a case of corneal ulcer caused by distichiasis of a 2-year-old Shih Tzu, a high-frequency surgical instrument for animals was converted into an electric epilation needle to attempt a procedure to destroy the eyelash hair follicles on the upper eyelid. A epilation needle was developed to have a diameter of 0.1 mm and a length of 4 mm at the end of the handle of DOCTANZ 400, an electrosurgical instrument for animals only. In the procedure, 2~3 mm of an epilation needle was inserted into the hair follicle, and 1 watt of electric power was applied to the hair follicle for about 5 sec. to carry out electrolysis until white bubbles were generated around the meibomian glands thereby destroying the hair follicle. As a result, no eyelashes grew any longer in the treated area indicating that the treatment was successful. It is hoped that the method developed in this study will be applied so that it will be widely used as a treatment method for distichiasis in companion animals that can be frequently seen hereafter.

지반절삭 전기에너지를 활용한 회전굴착토크 예측에 관한 연구 (A Study for Predicting Rotational Cutting Torque from Electrical Energy Required for Ground Drilling)

  • 최창호;조진우;이용수;정하익;박용부
    • 한국지반공학회논문집
    • /
    • 제23권7호
    • /
    • pp.57-64
    • /
    • 2007
  • 본 연구는 지반의 회전굴착에 필요한 굴착 토크(torque)를 회전 오거 구동에 소요되는 전기에너지를 활용하여 예측할 수 있는 방법을 제시한다. 지반회전굴착은 선굴착 말뚝 시공, 연약지반 개량을 위한 소일-시멘트 그라우팅(soil-cement grouting), 사전 지반조사 등 지반공학 분야에 흔히 사용되고 있다. 오거를 통한 회전굴착에 소요되는 전기에너지와 회전 토크의 상호 관계를 이해하기 위하여 소형 실내 실험기기를 제작하고 파일럿(pilot)실험을 수행하였다. 실험기기는 직경 $D=5{\sim}10mm$의 일반 드릴 비트를 회전하여 CBR몰드에 다짐 제작된 토사공시체를 굴착할 수 있도록 설계되었다. 드릴 비트는 감속기어를 통하여 19RPM의 정격 속도로 회전하며, 구동 모터는 25Watt 용량의 교류 유도 전동기이다. 드릴 비트로 공시체를 회전 절삭하며 구동 모터에 소요되는 전류의 증가량과 실제 비트에 작용하는 토크(torque)를 측정하였고, 선형 회귀분석을 통하여 전류 증가량과 토르크 증가량의 상호관계를 파악하였다. 구하여진 회귀분석 결과를 활용하여 굴착시 소요되는 전류 증가량으로부터 굴착토크를 예측하여 계측된 토크값과 비교하였다. 비교로부터 굴착에 소요되는 전기력을 활용하여 굴착토크를 예측할 수 있다는 결론을 얻었으며, 이로부터는 굴착 전기력의 분석을 통해 지반의 전단강도 특성을 예측할 수 있음을 증명하고자 하였다.

농촌의 전력및 전기기기의 이용특성분석 (Analysis of the Utilization Characteristics of Electrical Power and Equipments on the Farms)

  • 박승우;류한열
    • 한국농공학회지
    • /
    • 제17권4호
    • /
    • pp.3943-3955
    • /
    • 1975
  • The purposes of this study are to evaluate the utilization characteristics of electrical power consumption, to grasp the present trends in the use of electrical equipments, to estimate the demand factor and load factor being held, and to evaluate the efficiency of electical uses for the recently electrified farms cultivating paddy rice. For the purposes, 109 sample farms located in eleven villiages electrified in six different years from 1968 to 1973, were chosen at random and investigated on 35 items concerning to electrical uses and wiring systems. The survey was carried out in 1975, in the vinicity of Suweon city. The results are summarized as follows: i) The average annual power consumption on sample farms is considered to be low, being 242.9 Kwh. in 1974, and varied according to the different electrified year and size of cultivated land, respectively. It has significant positive correlation to the area of farm, too. ii) Between the number of year of electrical uses and the power consumption, there is very significant positive correlation, which could be expressed as Y=43.041+16.108 X, where X represents the number of years of electrical uses. The annual increment of power consumption is much greater at the beginning of the electrification than that at the later years, its average being approximately 20 percent. However, it is recommended that any estimation of long-term increments should be carefully investigated. iii) The monthly power consumption varies considerably throughout a year, in which the heaviest farm load occurs in November. Observing the seasonal variation of consumption, the winter-time is the heaviest season while the summer is the lowest. The result implies house lighting is chief contribution to the present electrical consumption on the farms. Comparing the variation of monthly consumption ratios between the sample farms and industries, the electrical uses on the farms are independant of the industrial uses, and further, the agricultural uses are of inverse pattern to the farms from the results that there is negative correlationship between them, iv) The number of electrical equipments used on the farms are occupied chiefly by lighting sources. Next to the lighting sources, household appliances of small quantity and some motors are used. The mean electrical quantity is about 1, 127.4 watt, which corresponds to about 37.6 per cent to the contracted quantity. The composition of quantity is chiefly occupied by the electrical motor of about 1.5 hp., single-phased. The number of the annual utilization hours of each equipment is tabulated in Table IV-5. In contradiction to the high utilization of lighting sources and small household appliances, the motor is poorly used for approximately 22 hours in a year. v) More than 55 per cent of farms want to purchase new electrical equipments such as small household appliances and electrical motors in their number. The impulse of purchasing such items is stimulated by the contacts to the mass media and their knowledge on such equipments. Consequently, the increase of electrical uses could be prompted by such trials as education and demonstration. vi) The demand and load factors on the farms vary considerably according to the greater variation of the power consumption, daily or monthly. The daily demand factor is 22.4 per cent and load factor 18.6 per cent, while the annual demand factor is 1.3 per cent and load factor 70 per cent approximately. Therefore, the low efficiency of construction cost requires re-evaluation of the present contracted quantity of 3 Kw. or increase of electrical uses. vii) The electrical energy on the farms devoted chiefly to lighten the farm residences does not contribute to the farm incomes. Consequently, the cost of electrical consumption presses considerably upon the farm economy. Therefore, there is great need to build up the electrical uses on the farms through the development of new works and techinques to utilize any electrical equipments on the production of farm products. Further more, such the development should be related to increase the actual income of the farm consumers.

  • PDF

Nano-ZnO/Laponite/PVA 광촉매 흡착볼의 메틸렌블루 제거효율 평가 (Evaluation on Removal Efficiency of Methylene Blue Using Nano-ZnO/Laponite/PVA Photocatalyzed Adsorption Ball)

  • 오주현;안호상;장대규;안창혁;이새로미;주진철
    • 대한환경공학회지
    • /
    • 제35권9호
    • /
    • pp.636-642
    • /
    • 2013
  • 광촉매인 나노크기의 산화아연(ZnO)과 흡착기능의 지지체인 Laponite, 결합제인 poly vinyl alcohol (PVA)를 혼합하여 붕산(boric acid)과 가교반응(crosslinking)을 통해 흡착과 광분해가 동시에 발생하며 회수가 불필요한 nano-ZnO/Laponite/PVA (ZLP) 광촉매 흡착볼을 개발하였다. ZLP 광촉매 흡착볼 제작을 위한 최적의 배합비는 Nano-ZnO:Laponite:PVA:deionized water의 구성비가 3:1:1:16 (by weight)으로 도출되었으며, PVA가 붕산과의 가교결합을 통해서 다층의 망(mesh network)과 막(film)을 형성하여 Laponite의 팽윤과 ZnO의 탈리 현상을 억제하는 것으로 사료된다. 수중안정성을 개선하고 비표면적을 높이기 위한 최적의 건조방법은 microwave를 활용하는 방법이며, SEM과 TEM의 분석을 통해 다양한 크기(55~500 ${\mu}m$)의 공극(pore)이 분포하며 ZnO의 균질한 분포를 확인할 수가 있었다. 메틸렌블루 광분해 특성은 반응 초기(40분)에는 Laponite와 메틸렌블루의 이온결합에 따른 흡착제거가 주요 제거 기작이며, 메틸렌블루의 흡착이 포화상태에 도달 후 광분해를 통한 제거가 발생함을 확인하여 흡착과 광분해가 동시에 발생하여 수중에 용해된 메틸렌 블루를 효과적으로 제거할 수 있음을 확인하였다. 본 연구를 통해 짧은 시간에 흡착과 광분해가 동시에 진행되어 난분해성 오염물질을 효과적으로 제거하는 광촉매 흡착볼의 제작이 가능하며, 나노물질의 탈리로 인해 발생하는 환경 및 수용체에 미치는 위해성도 최소화 할 수 있을 것으로 판단된다.

915 MHz 극초단파 자입온열시 온도분포 적정화에 관한 연구 -조직등가물 및 가묘대뇌를 대상으로- (The Study of Standardization of Temperature Distribution of Interstitial Hyperthermia -In Phantoms and Living cat's brain tissue (Normal Tissue)-)

  • 고경환;조철구;박영환;류성렬;김종현;이승훈
    • Radiation Oncology Journal
    • /
    • 제8권1호
    • /
    • pp.7-15
    • /
    • 1990
  • 원자력병원 치료방사선과에서는 자입온열치료 등을 위한 역동적 조직 등가물을 자체 고안하여 제작된 역동적 조직등가물에서 얻은 결과와 실제 가묘 대뇌실질에 자입온열치료를 시행해서 얻은 결과에서 다음과 같은 결론에 도달하여 향후 인위적으로 유발시킨 가묘 대뇌실질 내 악성종양에 대한 실험적 연구의 기초가 되고 암치료율 향상을 위한 시발로 삼으려 한다. 1, 915MHz 극초단파를 이용한 자입온열기 단말의 치료가능 용적은 $50\%$ S.A.R. (specific absorption rate)에 의하면 $2\;cm\times\;cm\times6\;cm$이었다. 2, 순환이 되지 않는 정적 조직등가물에서는 공기 중 압력분포와 같았고 자입온열치료기 가동후 $5\~10$분 내에 극초단파에 의해 간섭받지 않는 Ga-As fiberoptic thermistor로 측정되지 않는 $55^{\circ}C$ 이상의 온도 이상으로 상승됨이 관찰되었다. 3, 생리식염수를 순환시킨 역동적 조직등가물에서 자입온열치료기 가동 후 5분 이내의 경과기(transit period)를 거쳐 45분 이상의 안정기 (steady peroid)를 얻을 수 있었다. 4, 역동적 조직등가물에서 순환을 차단하면 정적 등가물과 같은 온도 상승이 관촬되었다. 5, 가묘 대뇌실질에 대한 자입온열치료를 5 Watts이하의 출력으로 사용하는 경우 비교적 안정되게 시행 가능했고 순환차단에 의한 급격한 온도상승이 관찰되었고 최고 $55^{\circ}C$ 이상까지 걸리는 시간이 출력 5, 10 및 15 Watts에서 각각 15.2 (SE 0.4), 9.7 (SE 0.3) 그리고 6.3 (SE 0.4)분 이었다. 본 연구는 기초 생물학적 실험이지만, 그 결과는 임상 암치료 방법에 직접 이용되는 것이며 또한 치료수행을 위해 반드시 필요한 과정이다. 따라서 치료방법의 결정, 성적분석, 치료 부작용의 예측 및 대책확립 등에 적용될 뿐만 아니라, 외국의 치료결과와 비교시 본원 온열치료의 특성제시에 활용될 수 있다.

  • PDF

심한 만성기류폐쇄 환자의 Impairment/Disability 측정에 있어 폐기능검사 및 운동부하검사의 역할 (The role of the pulmonary function test and the exercise test for assessing impairment/disability in patients with chronic airflow obstruction)

  • 천선희
    • Tuberculosis and Respiratory Diseases
    • /
    • 제43권3호
    • /
    • pp.377-387
    • /
    • 1996
  • 연구배경 : 폐기능의 경한 저하는 운동능력이나 작업능력을 제한 시키지 않지만 심한 폐기능 저하는 중요한 제한 요인이 된다. 1980년 세계보건기구(WHO)에서는 폐기능의 감소를 impairment, 운동기능의 감소를 disability로 구분하였으며, 1986년 ATS에서 FVC가 50% 이하로 감소, FEV1이 40% 이하로 감소, FEV1/FVC가 40% 이하로 감소, 혹은 DLCO가 40% 이하로 감소된 경우, 또는 운동부하 검사에서 VO2max가 15 ml/Kg/min 이하이면 거의 모든 작업기능을 수행할 수 없는 심한 장애상태로 평가하였다. 이에 심한 기류폐쇄환자를 대상으로 impairment/disability를 평가하는데 있어 안정시 폐기능 검사와 운동부하검사의 역할 및 상관관계를 살펴보고자 하였다. 방법 : 성한 만성기류폐쇄(CAO; chronic airflow obstruction) 환자 19예를 대상으로 안정시 spirometry와 body plethysmograph를 시행하였으며, cycle ergometer를 이용하여 증상제한적 최대 운동검사(symptom limited maximal exercise test)를 분당 5 - 10 watt 씩 증가시키면서 시행하였다. 환자를 안정시 폐기능검사 결과에 따라 FEV1이 40% 이하인 경우 severe impairment군, 이상인 경우 non-severe impairment 군으로 구분하여 비교하였다. 결과 : 1. Severe impairment 군은 non-severe impairment 군에 비하여 기도폐쇄 및 저산소증이 유의하게 심하였고, VO2max가 유의하게 감소되어 운동수행상태가 현저하게 감소되어 있었다. 2. Severe impairment 군은 운동부하검사에서 환기제한장애(ventilatory limitation)를 보였으며, 운동제한 증상은 10예중 9예가 호흡곤란이었다. 3. 만성기류폐쇄 환자중에서 결핵 파괴성 폐질환 환자의 장애가 가장 심하였다. 4. 안정시 폐기능검사 결과 중에서 FEV1이 심한 장애를 결정하는 가장 유용한 지표였으며, VO2max와의 상관관계도 가장 컷다(r = 0.81, p < 0.001). 5. 안정시 폐기능검사에 의한 심한 폐기능장애(impairment by WHO)는 sensitivity 80%, specificity 89%로 심한 운동장애(disability by WHO)를 예측할 수 있었다. 결론 : 심한 기류폐쇄환자에서는 안정시 폐기능검사 특히 FEV1으로 운동수행상태를 잘 예측할 수 있어, 운동부하검사를 시행하지 않고서도 안정시 폐기능검사인 폐기능 장애(impairment by WHO)에 따라 운동기능 장애(disability by WHO)를 충분히 판단할 수 있을 것으로 생각된다.

  • PDF

북극항로 시대에 대비한 부산지역의 미래성장 유망산업 및 정책 평가에 관한 연구 (The Analysis of Future Promising Industries of Busan and Marine Policy in the Era of the Northern Sea Route)

  • 류동근;남형식
    • 한국항만경제학회지
    • /
    • 제30권1호
    • /
    • pp.175-194
    • /
    • 2014
  • 최근 우리나라 정부와 지자체들은 북극해와 관련한 다양한 정책을 발굴하고 북극해 대응 기구를 구성하여 북극항로 시대에 대비하고 있다. 북극해 정책 수립에 앞서 가장 먼저 고려해야 할 사항은 북극해 및 북극항로 활성화에 따른 국내 유망산업은 무엇인지, 현재 정부에서 추진하고 있는 해양, 해운, 항만물류, 수산 정책 중 어떤 정책들이 북극해 및 북극항로와 관련이 있는지를 파악하는 것이 중요하다. 본 연구의 목적은 부산 지역의 미래 유망산업에 대한 성장성과 경쟁력을 평가하고, 북극항로 활성화를 위한 추진 사업의 중요성과 시급성 그리고 부산지역 경제 기여도를 분석하고자 한다. 이를 위하여 해양 해운 항만물류, 수산 관련 업계 관계자, 해양수산부 및 부산시의 정책담당자, 관련학계, 연구원 등 총 64명의 전문가 집단 설문조사 및 인터뷰를 진행하였다. 북극항로 상용화에 대비하여 부산경제가 발전하기 위해서는 북극항로를 이용하는 선박이 부산항에서 선박급유, 선박수리, 선용품공급 서비스를 받을 수 있는 여건을 마련해야 한다. 이를 위해 관련 산업의 육성이 필요하다. 한편 동남권에는 조선산업이 발달되어 있다. 북극항로의 상업화로 내빙선박의 수요가 증가하고 국내 조선 및 조선기자재 산업이 성장할 수 있다. 따라서 북극항로를 이용하는 특수선박에 대한 조선기술을 지속적으로 개발하여 극지용 선박 건조를 선점해야 할 것이다. 북극항로가 활성화되면 부산항은 북극 자원개발을 위한 해양플랜트 전진기지가 될 수 있다. 이를 위해 고부가가치 해양플랜트, 기자재 및 관련 서비스업 육성, 해양플랜트 공급기지 구축 등의 정책이 추진되어야 할 것이다. 북극해와 관련된 전문인력 양성을 통해 북극해 사업 진출 확대와 향후 북극해 및 북극항로 이용에 따른 전문 인력 수요 증대에 주도적으로 선도해야 할 것이다. 이를 위하여 단기적으로는 북극항로 전문 인력 양성은 러시아 등의 교육 전문기관과의 제휴를 통하여, 극지 전문인력 양성 교육 기술을 습득해야 한다. 그리고 중장기적으로는 해운 항만 물류분야의 전문 인력인 빙해역 항해사(Ice Navigator), 선박관리 전문가, Ice Pilot의 양성을 추진해야 할 것이다. 수산산업의 경우 북극해 지역까지의 어장 확대로 인해 원양 어획량 증대가 예상되며 이에 따른 원양어업과 수산물 가공업이 유망산업이 될 것으로 예상된다. 원양 어업과 관련해 조업 가능 대상국의 법 제도 파악과 극지 조업이 가능한 어선 및 어업 장비 개발이 선행되어야 할 것이다.