• 한국수자원학회논문집
• /
• 제56권10호
• /
• pp.655-665
• /
• 2023

본 연구에서는 일정한 경사와 조도를 갖는 가상 유역에서 10가지 규모의 강수가 순간적으로 발생할 때 단위유량도를 산출하였다. 그런 다음 강수 규모에 대하여 단위유량도 첨두유량의 관계와 첨두발생시간의 관계를 각각 산출하였다. 이때 강수 규모만이 유역의 단위유량도 첨두치에 주는 영향을 파악하기 위해서 자연 유역을 대신하여 마름모 형태, 일정 경사, 일정 조도의 유로 환경 상태 등으로 단순화한 가상 유역을 적용하였다. 그리고 유역에 내린 강수는 유효우량이고 유출은 직접유출이고 낙하지점에서 출구 방향으로 직선적인 등류로 유출된다고 가정하였다. 강수 규모를 10가지로 유효강수 10 mm, 40 mm, 90 mm, 160 mm, 250 mm, 360 mm, 640 mm, 1,000 mm, 1,210 mm, 1,690 mm의 경우로 하여 단위유량도의 첨두유량과 첨두발생시간을 각각의 관계를 산출하였다. 본 연구에서 주목할 만한 성과는 유역의 저류 효과가 없어도 강수 규모가 커질수록 유출 깊이가 커져서 유역의 유속이 빨라지고 단위 시간당 유하 거리도 커지므로 첨두유량은 커지고 첨두발생시간은 빨라진다는 것이었다. 이는 유역 유출의 비선형적 특성이다.

• 한국수자원학회논문집
• /
• 제43권4호
• /
• pp.399-408
• /
• 2010

본 연구에서는 지형학적 분산을 고려한 특성유속에 따른 Nash 모형 매개변수의 민감도 분석을 실시하였다. 또한 이러한 특성유속의 변동에 따른 순간단위도의 형상의 변화를 수치실험을 통해 비교 분석하였다. 대상유역은 보청천 유역 중 본류에 위치하고 있는 4개의 소유역을 선정하였다. 각 대상유역에 대해 지리정보체계를 이용하여 지표면과 하천의 배수경로길이에 대한 평균과 분산을 산정하였다. 산정된 배수경로길이와 특성유속에 의한 Nash 모형 매개변수를 추정하였다. 추정된 매개변수에 의해 순간단위도를 유도하여 형상의 변화를 비교하였다. 이러한 연구를 통해 도출된 주요 결과는 다음과 같다. Nash 모형 매개변수는 지표면 특성유속에 민감하게 반응함을 알 수 있었다. 또한 순간단위도의 감수부의 형상과 첨두유량은 지표면 특성유속에 지배적인 영향을 받으며, 순간단위도의 상승부의 형상과 첨두시간은 하천 특성유속에 지배적인 영향을 받음을 알 수 있었다.

• Current Research on Agriculture and Life Sciences
• /
• 제10권
• /
• pp.35-40
• /
• 1992

전국(全國) 112개(個) 저수지(貯水池)를 대상(對象)으로 유성인자간(流城因子間)의 관계(關係) 및 유성인자(流城因子)와 첨두유량(尖頭流量)과의 관계(關係)를 조사(調査) 분석(分析)한 결과(結果) 다음과 같은 결론(結論)을 얻었다. 1. 유성면적(流城面積)과 주하천장(主河川長), 유성면적(流城面積)과 유성(流城)의 주장(周長), 유성면적(流城面積)과 지류총연장(支流總延長), 주하천장(主河川長)과 유성(流城)의 주장(周長), 주하천장(主河川長)과 하천중심장(河川重心長), 주하천(主河川) 평균경사(平均傾斜)와 유성(流城)의 평균표고(平均標高)와의 관계(關係)를 상관분석(相關分析)하여 상호간(相互間)의 상관관계식(相關關係式)을 유도(誘導)하였다. 2. 각 유성인자(流城因子)와 첨두류량(尖頭流量)과의 단순상관분석(單純相關分析) 결과(結果) 상관계수(相關係數) r=0.004~0.546으로 비교적(比較的) 낮게 나타나 유성(流城)으로부터의 유출현상(流出現象)은 그 유성(流城)의 여러 인자(因子)에 영향(影響)을 받는다는 것을 확인(確認)할 수 있었다. 3. 유성면적(流城面積), 주하천장(主河川長), 주하천(主河川) 평균경사(平均傾斜), 저수지(貯水池) 설치점(設置點)의 표고(標高)를 독립변수(獨立變數)로 하여 첨두유량(尖頭流量)과의 다중상관분석(多衆相關分析)을 실시(實施)한 결과(結果) $Q_{100}=66.43A^{0.869}L^{-0.536}S^{0.456}Hs^{-0.122}$인 상관식(相關式)이 유도(誘導)되었다.

• 한국물환경학회지
• /
• 제24권2호
• /
• pp.169-173
• /
• 2008

A field monitoring was conducted in order to find out the discharge characteristics of non-point source pollutants in the agricultural area. Event Mean Concentration (EMC) of TSS, $BOD_5$, $COD_{Mn}$, TP, TN was calculated based on the monitoring data of 10 rainfall events at agricultural watersheds. A significant relationship was observed from the correlation between EMCs and rainfall characteristics. The result shows that EMC ranges of 95% confidence intervals were 50.5~203 mg/L for TSS, 0.8~14.2 mg/L for $BOD_5$, 4.2~20.7 mg/L for $COD_{Mn}$, 2.4~4.5 mg/L for TN and 0.2~0.5 mg/L for TP, respectively. The correlation coefficients between TSS and TP and between $BOD_5$ and $COD_{Mn}$ were found to be 0.912 and 0.961. But TN was lower correlated with other EMC factors. It was also found that rainfall characteristics was not correlated with EMCs.

• 한국농공학회논문집
• /
• 제62권2호
• /
• pp.1-15
• /
• 2020

In this study, the characteristics of crop damage area by flooding for 113 middle range watersheds during 2000-2016 were analyzed and future crop damage area by flooding were analyzed using 13 GCM outputs such as hourly maximum rainfall, 10-min maximum rainfall, number of days of 80 mm/day, daily rainfall maximum, annual rainfall amount associated with RCP 4.5 and RCP 8.5 scenarios and watershed characteristic data such as DEM, urbanization ratio, population density, asset density, road improvement ratio, river improvement ratio, drainage system improvement ratio, pumping capacity, detention basin capacity, and crop damage area by flooding. A constrained multiple linear regression model was used to construct the relationships between the crop damage area by flooding and other variables. Future flood index related to crop damage may mainly increase in the Mankyung watershed, Southwest part of Youngsan and Sumjin river basin and Southern part of Nackdong river basin. Results are useful to identify watersheds which need to establish strategies for responding to future flood damage.

• 한국농공학회논문집
• /
• 제57권5호
• /
• pp.89-99
• /
• 2015

In this research, 1,032 data of precise safety inspection from 2004 to 2013 are gathered and constructed for finding effective safety inspection systems. Items are extracted from constructed data and factors for typology are decided with statistical method such as principle component analysis and cluster analysis. For factor decision, we extruded independent characteristics such as morphological and geographical characteristic, and deleted items which can be expressed by combination of independent characteristics. Four factors such as total storage, watershed ratio, levee length ratio, and spillway length ratio are extracted in this process. In cluster analysis, levee length ratio is excluded because it is not separated as cluster. Finally nine types of agricultural reservoir are extruded by total storage, watershed ratio, and spillway length ratio with frequency analysis.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 2005년도 학술발표논문집
• /
• pp.534-539
• /
• 2005

The purpose of this study is the introduction of pollutant loads's estimation into Saemangeum watershed area with M.E.'s guidebook for TMDL and GIS tool. To estimate reliable pollutants loads, it is necessary to think about characteristic of removal, discharge and runoff as time series. In this study, it was calculated for generation loads which be came from pollutant source, discharge loads which be reduced in the treatment facilities and delivery loads which be considered the self purification parameter and delivery distance. To assess the delivery distance handily, it was particularly estimated using Arc-GIS. It was met with good results that delivery loads of BOD, T-N and T-P was reflected to seasonal precipitation. Lastly to verify the estimated pollutant loads, HSPF developed by USEPA was applied to it. It was showed a relativity of observed to simulated data for flow, Temperature, DO, BOD, $NO_3^--N$ TN and TP. Consequantly, this delivery loads can make full use of model input data for prediction of pollutant loads.

• 한국농공학회논문집
• /
• 제50권6호
• /
• pp.3-12
• /
• 2008

It is important to estimate accurate effective rainfall to analyse flood flow and long-term runoff for the rational planning, design, and management of water resource. The initial abstraction is also important to estimate effective rainfall. The Soil Conservation Service (SCS) has developed a procedure and it has been most commonly applied to estimate effective rainfall. But the SCS method still has weak points, because of unnatural assumptions such as antecedent moisture conditions and initial abstraction. The coefficient of initial abstraction(K) is depending on the soil moisture condition and antecedent rainfall. The maximum storage capacity of Umax which is calibrated by stream flow data in the proposed watershed was derived from the DAWAST(DAily WAtershed STreamflow) model. The values of K obtained from 69 storm events at the five watersheds are ranging from 0.133 to 0.365 and its mean value is 0.207. Effective rainfall could be estimated more reasonably by introducing new concept of initial abstraction. The equation of $K=0.076Sa^{0.255}$ was recommended instead of 0.2 and it could be applicable to the small-medium rural watersheds.

• 한국농공학회논문집
• /
• 제63권6호
• /
• pp.49-60
• /
• 2021

BCSA (Bias-Correction and Stochastic Analog) is a statistical downscaling technique designed to effectively correct the systematic errors of GCM (General Circulation Model) output and reproduce basic statistics and spatial variability of the observed precipitation filed. In this study, the applicability of BCSA was evaluated using the ASOS observation data over South Korea, which belongs to the monsoon climatic zone with large spatial variability of rainfall and different rainfall characteristics. The results presented the reproducibility of temporal and spatial variability of daily precipitation in various manners. As a result of comparing the spatial correlation with the observation data, it was found that the reproducibility of various climate indices including the average spatial correlation (variability) of rainfall events in South Korea was superior to the raw GCM output. In addition, the needs of future related studies to improve BCSA, such as supplementing algorithms to reduce calculation time, enhancing reproducibility of temporal rainfall patterns, and evaluating applicability to other meteorological factors, were pointed out. The results of this study can be used as the logical background for applying BCSA for reproducing spatial details of the rainfall characteristic over the Korean Peninsula.

• 한국지리정보학회지
• /
• 제11권3호
• /
• pp.1-12
• /
• 2008

본 연구에서는 다양한 수문 모형에 적용을 위한 입력자료 도출 기반을 마련하고자 보다 편리하고 체계적인 유역특성자료 분석시스템을 개발하였다. PRMS 모형을 이용하여 유출분석 수행시 입력자료 생성을 위해 사용되는 USGS WEASEL을 참고하여 시스템 개발항목을 도출하고, 체계적이고 효율적인 시스템 개발 및 유지관리를 위하여 UML을 이용한 객체지향 시스템을 설계하였다. 또한, 편리한 사용자 인터페이스 제공 및 다양한 수질 수문 모형에 적용하기 위하여 GIS 컴포넌트 기반인 ArcGIS ArcObjects를 이용하여 유역특성자료 분석시스템을 개발하였다.