• 제목/요약/키워드: Waterproofing Performance

검색결과 224건 처리시간 0.021초

표준화된 방수기술 평가기법 개발 및 평가체계 구축 (Proposed Development and Evaluation System for Existing Standardized Waterproof Technology Assessment Methods)

  • 송제영;이선규;최은규;이정훈;김병일;오상근
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2018년도 춘계 학술논문 발표대회
    • /
    • pp.341-342
    • /
    • 2018
  • Waterproofing materials and construction methods have been developed and applied to various construction sites since the past. However, there many cases where the waterproofing performance is not satisfactory, leading to continuous water leakage. It has been observed that a key reason for this is because waterproofing method and material selection is not optimized in terms of the appropriate application area and environmental degradation factors. This paper proposes that future selection of waterproofing methods should consider the following evaluation criteria; 1) waterproof performance evaluation according to site conditions, 2) evaluation of construction method, 3) manufacturing and maintenance of waterproofing systems.

  • PDF

표준화된 방수기술 평가기법 개발 및 평가체계 구축 (생산기술, 유지관리 평가 중심) (Proposed Development and Evaluation System for Existing Standardized Waterproof Technology Assessment Methods(Production technology, maintenance evaluation))

  • 송제영;서현재;최은규;이정훈;김병일;오상근
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2019년도 추계 학술논문 발표대회
    • /
    • pp.235-236
    • /
    • 2019
  • Waterproofing materials and construction methods have been developed and applied to various construction sites since the past. However, there many cases where the waterproofing performance is not satisfactory, leading to continuous water leakage. It has been observed that a key reason for this is because waterproofing method and material selection is not optimized in terms of the appropriate application area and environmental degradation factors. This paper proposes that future selection of waterproofing methods should consider the following evaluation criteria; 1) waterproof performance evaluation according to site conditions, 2) evaluation of construction method, 3) manufacturing and maintenance of waterproofing systems.

  • PDF

국내 발전소 지붕방수설계 시스템 및 단열 성능에 관한 연구 (A Study on the domestic power plant roof waterproofing system & insulation efficiency)

  • 정광호
    • 한국디지털건축인테리어학회논문집
    • /
    • 제11권1호
    • /
    • pp.33-42
    • /
    • 2011
  • As the development of construction technology and new materials, building requirements has been varied gadually. Comfortable environment and serviceability of production activity and energy conservation are being dealt with very seriously. Recently localization of engineering technology of Power Plant, however, construction materials and domestic technology are being developed forcingly. According to above topics this thes is going to study roof waterproofing, thermal insulation and evaluate adiabatic performance and evaluation of properties of waterproofing materials and energy conservation. The results of studying and evaluating of roof waterproofing, thermal insulation and adiabatic performance of Power Plant are as follows. 1. Sheet waterproofing method is better than that of asphalt waterproofing method in that adaptability of wearhertight, thermal resistant, contraction and expansion. 2. It is required to replace polyurethane or ethylene used as thermal insulation with rock wool which is noncombustible materials. 3. It is recommended to usd outer insulation method than inner insulation method due to superioty of outer insulation method. Efficiency of insulation materials used in power plant is generally good except perlite mortar used in the power plant(YGN 1-2, GRI 1-2).

구조적 성능이 보강된 차수용 박층 멤브레인의 기초 물성평가 (Experimental Study on Enhanced Structural Properties of Sprayable Waterproofing Membrane)

  • 이철호;김진태;최명식;장준희;강태호;최순욱
    • 한국지반신소재학회논문집
    • /
    • 제17권4호
    • /
    • pp.93-102
    • /
    • 2018
  • 차수용 박층 멤브레인은 폴리머로 구성된 재료로 기존 방수포(sheet membrane)를 대체할 수 있는 뿜어 붙이는 방식의 차수 재료이다. 시공에 있어서 뿜어 붙이는 방식을 사용하기 때문에 타설이 용이하고 상대적으로 높은 부착성능을 보인다. 차수용 박층 멤브레인의 배합은 영구 지보재로 쓰이는 TSL(Thin Spray-on Liner)와 매우 유사한 구성을 갖으나 적용 목적에 따라 차수와 지보재로 구분하고 있다. 본 연구에서는 차수용 박층 멤브레인의 차수 성능을 확보한 상태에서 구조적인 성능을 보강할 수 있도록 배합비를 조절하였다. 이를 검토하기 위해, 영구 지보재용 멤브레인 재료에 사용되는 성능 기준에 따라 시험을 수행하고 결과를 검토하였다. 시험결과 본 연구에서 고려한 차수용 박층 멤브레인의 구조적 성능은 영구 지보재로도 사용이 가능한 정도의 성능을 보였다.

폴리머수지와 폴리이소부틸렌을 복합한 자착식시트의 방수성능평가를 위한 역학적 실험연구 (A Mechanical Experimental Study for Waterproofing Performance Evaluation of Self Adhesive Sheet Combined Polymer Resin and Poly-Iso Butylene)

  • 민인기;태기호
    • 한국안전학회지
    • /
    • 제27권5호
    • /
    • pp.126-134
    • /
    • 2012
  • The purpose of this study is to investigate waterproofing performance of self adhesive sheet combined polymer resin and poly-iso butylene. For the performance estimation of external waterproofing of concrete underground structures, there can be required various properties such as adhesion strength, hair crack resistance, repeat low and high temperature test, and so on. In this study, there engineering properties of composite system using polymer resin and poly-iso butylene were examined and could be confirmed to satisfy the guidelines of KS. Especially, it was turn out that the adhesion properties was excellent and high crack-resistance up to 1.49mm will be perform.

일체부착형 합성고분자 시트를 이용한 지하구조물 방수 성능향상에 관한 실험적 연구 (An Experimental Study on Improvement in Waterproofing Performance of Ground Structures applied to Synthetic Polymeric Sheet of monolithic adhesion Type)

  • 강효진;송제영;권시원;오상근
    • 한국건축시공학회지
    • /
    • 제5권3호
    • /
    • pp.125-129
    • /
    • 2005
  • The waterproofing in slab and wall of underground structure, have a couple of construction methods which are inside waterproofing methods for inner surface, and outside waterproofing methods for out wall and slab surface waterproofing. In resent years, however, it has been adapted the inside waterproofing construction method, as increasing of construction expenses cost and low workability and technology, nevertheless, outside waterproofing has set a most high value construction method. In inside waterproofing construction method, it is difficult to repair and assure durability and safety for concrete which has direct water-press. So, It is necessary for adopt the outside waterproofing method. For that reasons, this study based on the application for outside waterproofing method on the under ground structure, to more increase durability, to introduce mono adhesive sheet waterproofing materials. as considering chemical, physical properties.

무기질계 탄성 도막재와 고무 아스팔트를 적층한 일체형 방수재의 시공특성에 관한 실험적 연구 (A study on a performance the appliable rubber asphalt of monolithic waterproofing material of construction quality and the cement polymer modified waterproof coating membrane material of surface treatment.)

  • 박진상;최성민;박영태;오상근
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
    • /
    • pp.223-226
    • /
    • 2005
  • In this study on the appliable Asphalt sheet of monolithic and inorganic matter waterproofing ,Fing material using of field because of problem of complex waterproofing sheet. Before this cement polymer modified waterproof coating and appliable asphalt sheet of monolithic whether have stability by method of construction about all style waterproofing that evaluate to new method of construction development naturally big emphasis put and try to approach. Did performance test item first at, as a result, drew by suitable thing in all KS items. This is considered to have more effective spot construction work because if means that have stability by material as well as method of construction.

  • PDF

공동주택 방수 시공 부위에 따른 성능등급의 필요성 확인 - AHP 분석을 중심으로 - (Necessity for Performance Grade for Residential Structure Waterproofing based on Application Areas - Using AHP Methodology -)

  • 안기원;오규환;오상근
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2021년도 봄 학술논문 발표대회
    • /
    • pp.21-22
    • /
    • 2021
  • Domestic residential buidling grading is currently comprised of 5 fields; sound-proofing, structure, ambient condition, living environment and fire-proofing. However, factors the take up most of the civil complaints are related to leakage, and waterproofing is not listed as part of the grading system. In particular, the Ministry of Land and Transport claims that the most crucial problems are leakage related in residential structures. Therefore, this study proposes to provide such grading system for waterproofing by AHP methodology based on waterproofing application locations in residential structures.

  • PDF

방수재료의 거동대응성능 시험시 비 구속조건에서의 구조물 거동 대응성능 평가의 한계와 향후 개선 방안 제안 (Limitations of Structural Behavior Response Performance Evaluation for Waterproofing Materials Under Non-Constrained Conditions and Suggestions for Future Improvement Measures)

  • 안기원;오규환;김수연;오상근
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2021년도 가을 학술논문 발표대회
    • /
    • pp.212-213
    • /
    • 2021
  • As structure and the waterproofing material are compressed through the backfilling process after the waterproofing material is installed on the underground structure at the actual site, there is a difference between the behavioral response force of the waterproofing material in the compressed state and the behavioral response force in the non-constrained state. In this regard, we will analyze the limitations of the current structural behavioral response evaluation and suggest an improvement plan so that the future test and evaluation environment can be evaluated under conditions similar to the field.

  • PDF

건축 복합방수공법의 최적성능에 관한 기초연구 (A Fundamental study on the Optimum Performance of the Architectural Hybrid Water-proofing Systems)

  • 임석호;임병훈
    • 한국건축시공학회지
    • /
    • 제5권2호
    • /
    • pp.123-130
    • /
    • 2005
  • The purpose of this study is to present the optimum performance of hybrid waterproofing technology, which is including material and construction method. Recently, Hybrid waterproofing technology is developed little by little in KOREA. But there is not any other criterion of performance and evaluation of this technology. So, It is needed that appropriate performance items is are settled urgently. This paper were obtained by the SPSS analysis. In this study the safety factor are more important performance of building waterproofing materials than durability comfortability and productivity. And results of this analysis showed that (1) safety performance consists of Fatigue resistance, Crack Control performance deterioration Processing of tensile performance, Compressive Strength test (2) comfortability performance consists of watertightness, bond performance (3) persistency performance consists of abrasion resistance, tensile performance, flexural strength (4) productivity performance consists of dimension, unit space weight.