• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2003년도 봄 학술발표회 논문집
• /
• pp.343-348
• /
• 2003

Generally, waterproof agent has been used only for the waterproof effect. But in this paper, through the durability test of concrete using inorganic waterproof agent, we recognized that the concrete using this agent is more excellent in some peculiar properties of durability than general concrete. In this paper, we did compressive strength test, permeability test, pore volume test, etc. And the conclusion is as followings. The concrete of using this agent is more excellent in economy, waterproof, durability, strength.

• 산업기술연구
• /
• 제31권A호
• /
• pp.79-86
• /
• 2011

This paper is results of centrifuge model experiment of investigating geotechnical engineering behavior of waterproof dike, located in soft grounds, in Saemankem in progress of construction. Centrifuge test with artificially increased gravitational level of 50g were performed to find ground settlements and excess pore-pressures developed during construction of waterproof dike by simulating the construction stages being predicted to occur in field so that the stability of waterproof dike could be assessed.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.41-42
• /
• 2023

Test results for a total of four types of complex waterproofing methods were analyzed. In the case of the A method, the stress generated by high-viscosity compounds adhering to the base test body during the behavior of the test body was transferred to the sheet surface layer. In the case of the B method and the C method, the properties of the waterproof sheet consisting of a non-hardened seal based and a non-hardened seal are well reflected and stress absorption in the non-hardened seal layer acts strongly, rapidly reducing stress transfer to the surface of the waterproof sheet. In the case of the D method, slip occurs due to repeated behavior, and the stress on the attachment surface is reduced, and the stress transfer to the surface is greatly reduced. As a result, four types of composite waterproofing methods resulted in changing the stress transfer mechanism caused by behavior on the concrete surface due to the physical properties of the internal constituent material of the waterproof sheet.

• 센서학회지
• /
• 제28권5호
• /
• pp.318-322
• /
• 2019

In shooting training, an impact point identification system that uses the impact wave of the bullet to check the impact point in the target plate has been recently used. Acoustic sensors used in these systems must be able to detect shock waves of high sound pressure levels and be both waterproof and dustproof for rainy weather and dusty environments, respectively. In this study, membranes with excellent waterproof, dustproof, and sound transmitting characteristics were selected through a characteristics test; a protection cap was installed to install the selected materials. After coupling the produced protection cap to the acoustic sensor housing, the sensitivity and phase characteristics of the acoustic sensor were checked. Through the waterproof and dustproof test, the performances of its sensitivity and phase characteristics were confirmed. Finally, the normal shockwave of a 5.56 mm diameter bullet was measured using a shockwave detection signal collecting plate equipped with a prototype of the acoustic sensor at a 100 m firing range.

• 품질경영학회지
• /
• 제46권3호
• /
• pp.425-440
• /
• 2018

Purpose: This study is aimed at developing of the flex resistance testing process at low temperature with the waterproof fabric to suit the military environment, and is designed to fit for the purpose of the waterproof materials in order to optimize the test method by finding out matters to improve from existing the test method and through previous studies. Methods: The test method, which has been applied to flex resistance of existing water-repellent materials, was improved and consequently, differentiated test results could be obtained according to the test temperature, sample size, and flexing method. Results: The testing of the total of 8 samples revealed that performance of the military requirement could hardly be met just by presenting the materials or 2~3 layers when the quality criteria for high functional water repellent fabrics were applied. PTFE(Polytetrafluoroethylene) is preferred to PU(Polyurethane) to be used in the extremely low-temperature environment, but durability under the low-temperature environment may be varied depending on film thickness or laminating technique even if the materials of waterproof films are identical. Therefore, in addition to the material or texture, the test method capable of reflecting durability under the low-temperature environment shall be suggested, and the newly designed test method proposed in this study was shown to suggest differentiated quality criteria by the material. Conclusion: The water resistance measurement and the test method following flex resistance with expanded range of flex will enable the differentiable test of the samples according to the number of repetition. This study is meaningful in that it suggests a differentiable test method capable of establishing a basis of deciding suitable material when selecting military goods made of water repellent material by properly improving the test method.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.208-209
• /
• 2021

In 2017, 100 aftershocks with a magnitude of 2.0~3.0 and 615 minor earthquakes in Pohang in Korea caused the collapse and destruction of aggregate, tile, glass, and other structural components of multi-family houses constructed as finishing materials for buildings, causing damage to vehicles and casualties. Based on this factor, seismic design standards were established for non-structural elements of buildings that were applied only to past structures. Therefore, this study reinterpreted various vibration response spectra transmitted to waterproof layers as well as the definition and concept of the waterproof layer demand response spectrum derived by developing various vibration response test evaluation devices through a new testing apparatus.

• 한국지역사회생활과학회지
• /
• 제27권2호
• /
• pp.295-304
• /
• 2016

This study was conducted to evaluate and compare the waterproofness and water vapor transport properties of 30 waterproof and breathable textiles in the market. MVTR upright cup test with water, MVTR inverted cup test with potassium acetate, and sweating hot plate test method were used for measuring the breathability of fabric samples. The waterproofness of all fabric samples and evaporative resistance of garment ensembles made with 5 selected waterproof and breathable textiles out of 30 samples were tested. The results of this study were as follows. The base fabrics of the most samples were basic weave structure with either polyester or nylon fiber. The waterproofness was over $5000mmH_2O$ for all the samples except densely woven fabrics. The evaporative resistance of garments that were made out of 5 fabric samples with a range of low to high breathability ranged $39.9{\sim}56.7m^2{\cdot}P{\cdot}W^{-1}$. The data of the water vapor transport properties of fabric samples varied with different test methods. Overall the bicomponent film fabrics showed better breathability and less standard deviation regardless of test methods. It is expected the breathability data without the information of test conditions used for marketing would confuse the consumers and the apparel manufacturers.

• 한국농공학회논문집
• /
• 제52권2호
• /
• pp.59-66
• /
• 2010

This study was performed to develop the embankment protection method that can reduce demage by prevention of embankment loss and collapse from overflow due to heavy rain and flood. For overflow test, model dam was prepared and embankment behaviors were monitored with the established piezometer and strain meter during overflow. As a result of overflow test for model dam, in case of embankment without waterproof mat, the lower end of embankment was collapsed within 40 seconds after beginning of overflow. On the other hand, in case of embankment with waterproof mat, embankment collapse didn't occurred during overflow. Accordingly, establishment of waterproof mat for embankment showed that be absolutely effective for the embankment protection during overflow in reservoir. Also, it showed that the minimum establishment range of waterproof mat to prevent embankment collapse in reservoir is from maximum storage level to the lower end of embankment.

• 한국구조물진단유지관리공학회 논문집
• /
• 제9권3호
• /
• pp.187-194
• /
• 2005

일반 무기계방수제의 경우 지하구조물에서 수분이 있을 경우, 용출되어 방수성을 잃어버리는 경우가 있고, 유기계의 경우에는 유기실리콘을 물에 유화시켜 사용하는 것으로 분산이 어려운 단점이 있다. 이러한 문제점을 향상, 개선시키기 위한 목적으로 무기계 규불화염을 주 원료로 하는 방수혼화제를 사용하여 시공성, 경제성, 내구성을 증진시킨 콘크리트의 제조를 시도하였다. 시험결과 미소수화열의 경우 WP의 사용량이 증가할수록 수화발열량이 감소하고, 지연되는 현상이 나타나 서중 콘크리트 혹은 댐과 같은 매스 콘크리트의 지연제로도 사용이 가능함을 확인할 수 있었다. 그리고, 압축강도시험을 해 본 결과, 치환율이 증가할수록 압축강도가 약 10%정도까지 증가되는 것으로 나타났다. 이는 콘크리트의 내부공극을 더욱 치밀하게 충진하여 나타난 결과라고 판단된다. 투수시험의 경우 WP가 혼입된 경우 금속불화물의 미립자가 형성되어 일반 콘크리트보다 방수효과가 현저히 뛰어남을 확인할 수 있었다. 내부공극시험을 실시해본 결과 WP의 첨가로 경화조직이 치밀해지고, 모세관 공극 존재에 의한 조직의 결함이 매우 억제되는 결과로부터 공극량이 상당히 감소됨을 확인하였다. 상기의 시험들을 통하여 무기계 구체 방수제를 사용한 콘크리트의 경우 방수성능을 보다 경제적으로 향상시킬 수 있고, 보다 뛰어난 수밀성을 가진 콘크리트를 제조할 수 있음을 확인할 수 있었다.

• 한국안전학회지
• /
• 제31권4호
• /
• pp.82-89
• /
• 2016

In this paper, various of experiments were performed for checking the usefulness of Pozzolan Inorganic Polymer(PIP) Waterproof Admixture. The results of the experiment enabled to set the optimum mixture ratio of PIP waterproof admixture as 3.5%. Then, the test specimen mixed with PIP waterproof admixture was produced and consider whether meeting the quality standard of waterproofing admixture for concrete (KS F 4926) From the results, all the items such as mechanical properties and durability were meet the quality standard of KS. The PIP waterproof admixture concrete shows the high resistance of absorption, permeability and chloride ion penetration thanks to its internal components such as siliceous powder, zinc stearate and dispersive polymer.