• Journal of Marine Life Science
• /
• 제7권2호
• /
• pp.196-204
• /
• 2022

This study observed changes in survival, growth performance and water quality for 90 days to confirm the possibility of Leiocassis ussuriensis farming using Biofloc technology (BFT) using Bacillus subtilis. Feed and molasses were added to the experimental tank to produce BFT water before planting the experiment, and B. subtilis was inoculated to stabilize the water quality for 40 days. The survival rate of the experimental fish was 92.7±3.2% in the control group and 95.8±3.3% in the BFT group. The Weight gain (WG) was 118.1±9.0% of the control and 197.7±15.6% of the BFT, and the Specific growth rate (SGR) was 0.87±0.5% of the control and 1.21±0.06% of the BFT. As for the feed efficiency, the control was 43.7±2.6% and the BFT was measured at 70.1±4.1%, indicating that the feed efficiency of the BFT was higher. As a result of measuring the water quality change during the experimental period, pH was reduced in both the control and the BFT, and Mixed Liquor Suspended Solids (MLSS) did not show any change in the control, but the BFT showed a significant increase at 90 days. NH₄⁺-N and NO₂^--N showed a significant increase from the 30 days of the experiment in the control, but showed no change in the BFT. In conclusion, as a result of applying the BFT system using B. subtilis to the process of cultivating Leiocassis ussuriensis, the water quality tended to stabilize, and the growth rate and feed efficiency were found to be higher than those of the control, confirmiWng that it had a positive effect.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• 제14권4호
• /
• pp.265-273
• /
• 2002

In this paper, wave absorbing characteristics of a horizontal submerged punching plate are investigated throughout the calculation and the experiment. The punching plate with the array of circular holes can force the flow to separate and to form eddies of high vorticity and cause significant energy loss. As an analytic tool, the linear water wave theory and the eigenfunction expansion method is applied. Darcy's law that the normal velocity of the fluid passing through the punching plate is linearly proportional to the pressure difference between two sides of the punching plate is assumed. The proportional constant called the porous coefficient is deeply dependent to the porosity. To obtain the relationship between the porosity and the porous coefficient the systematic model test for the punching plates with 6 different porosities is conducted at 2-dimensional wave tank. It is found that the porous coefficient is linearly proportional to the porosity(b=57.63P-0.9717). It is also noted that the optimal porosity value is near P=0.1 and the optimal range of submergence depth is $d/h\\leq0.2$ within entire frequency range.

• Journal of Aerospace System Engineering
• /
• 제13권6호
• /
• pp.9-16
• /
• 2019

The experiment on the liquid jet in crossflow in supersonic BFS (backward-facing step) flow was conducted to investigate the mixing characteristics. The working fluids are nitrogen and water. The shadow graph technique was used to visualize the flow field. Images captured by the high-speed camera were applied to analyze the flow phenomena. The liquid jet was injected at the re-circulation zone created by the supersonic jet flow. Experimental conditions are defined based on the pressure of the nitrogen gas chamber and pressurized liquid tank. In respective cases, the penetration depth of liquid jet and location of the Mach disc were observed to be proportional to the momentum ratio of gas and liquid jets.

• Journal of the Society of Naval Architects of Korea
• /
• 제51권6호
• /
• pp.459-479
• /
• 2014

This paper considers experimental and numerical studies on added resistance in waves. As the numerical methods, three different methods, strip method, Rankine panel method and Cartesian-grid method, are applied. The computational results of vertical motion response and added resistance are compared with the experimental data of Series 60($C_B=0.8$) hull, S175 containership and KVLCC2 hull. To investigate the influence of above-still water hull form, a Rankine panel method is extended to two nonlinear methods: weakly-nonlinear and weak-scatterer approaches. As nonlinear computational models, three ships are considered: original KVLCC2 hull, 'Ax-bow' and 'Leadge-bow' hulls. Two of the three models are modified hull forms of original KVLCC2 hull, aiming the reduction of added resistance. The nonlinear computational results are compared with linear results, and the improvement of computational result is discussed. As experimental approach, a series of towing-tank experiment for ship motions and added resistance on the three models (original KVLCC2 hull, 'Ax-bow' and 'Leadge-bow') are carried out. For the original KVLCC2 hull, uncertainty analysis in the measurement of vertical motion response and added resistance is performed in three waves conditions: ${\lambda}/L=0.5$, 1.1, 2.0. From the experimental results, the effects of hull form on added resistance are discussed.

• Transactions of the Korean Society of Automotive Engineers
• /
• 제20권4호
• /
• pp.125-132
• /
• 2012

Urea-SCR system, which converts nitrogen oxides to nitrogen and water in the presence of a reducing agent, usually AdBlue urea solution, is known as one of the powerful NOx reduction systems for mobile as well as stationary applications. For its consistent and reliable operation in mobile applications, such various problems as transient injection, ammonia slip, and freezing in cold weather have to be resolved. In this work, therefore, numerical study on three-dimensional unsteady heating problems were analyzed to understand the melting and heat transfer characteristics such as urea liquid volume fraction, temperature profiles and generated natural convection behavior in urea solution by using the commercial software Fluent 6.3. After validating by comparing numerical and experimental data with pure gallium melting phenomena, numerical experiment for urea melting is conducted with three different coolant heating models named CH1, 2, and 3, respectively. Finally, it can be found that the CH3 model, in which more coolant is concentrated on the lower part of the urea tank, has relatively better melting capability than others in terms of urea quantity of $1{\ell}$ for start-up schedule.

• Korean Journal of Environmental Agriculture
• /
• 제19권5호
• /
• pp.426-432
• /
• 2000

Field experiment was performed from August 1996 to December 1999 to examine the feasibility of constructed wetland system for sewage treatment in rural areas. A pilot system was installed in Konkuk University and the effluent of septic tank for school building was used as an influent to the wetland treatment basin. The system was composed of sand and reed, and operated continuously including winter time. Average removal rate of about 70% was observed for BOD, COD, and SS, about 50% for T-P, and about 25% for T-N. The reason for poor T-N removal might be due to high loading rate and short retention time. The system demonstrated satisfactory effluent concentration and stable performance in growing season. And it also worked adequately in wintertime even below $10^{\circ}C$ without freezing, and removal was still significant. The amount removed in BOD, COD, and SS was almost the same as in the growing season, and the amount removed in nutrients was about half of the one in growing season. Overall performance of the experimental system was compared with existing data base (NADB, 1994), and it was within the range of general system performance. As study period increased, removal rates for BOD, COD, SS, and T-P were consistently maintained and even enhanced, but removal rate for T-N decreased slightly. Wetland system was thought to be a feasible alternative for sewage treatment in rural area considering its low cost and low maintenance requirement. However, the effluent of the experimental wetland system often exceeded current effluent water quality standards, therefore, further treatment could be required if the effluent should be discharged to public waters. Wetland system of interest locates in rural area and is a part of rural ecosystem, therefore, ultimate disposal of reclaimed sewage for agricultural purpose or subsequent land treatment might be available and further research in this matter is recommended.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• 제35권1호
• /
• pp.35-40
• /
• 1999

We selected horse mackerel Trachurus japonicus, mackerel Scomber japonicus and arrow squid Todarodes pacificus, to use in the experiment. These fishes migrate to the Cheju coast and were caught by set-net. We studied the leading effect on the fish schools using the attracting lamps in an outdoor water tank at the Marine Research Institute in Cheju National University. The results obtained are summarized as follows; 1. The attracting rate of fish schools was increasing as the time between switching on and off each lamp was getting longer when each of the attracting lamps was switched on and off in order. However, the attracting rate of mackerel school showed a tendency to be higher than that of the other two species. 2. The attracting rate of fish schools was increasing as the time of switching off the lamps was getting longer when the attracting lamps which had been switched on were switched off in order. However, the attracting rate of mackerel school showed a tendency to be higher than that of the other two species. 3. The attracting rate of fish schools was decreasing as the speed of moving the attracting lamp was getting faster when the attracting lamp was moving. However, the attracting rate of mackerel school showed a tendency be higher than that of the other two species. 4. To determine the distance between the attracting lamps, there would be two methods. One is switching on and off the attracting lamps in order, and the other is switching off the attracting lamps in order which had been switched on. The methods showed that the attracting rate of fish schools were decreasing as the distance between the attracting lamps were getting longer. However, the attracting rate of mackerel school showed a tendency to be higher than that of the other two species.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• 제50권3호
• /
• pp.287-295
• /
• 2017

Egg development and morphological change of larvae of the Sakhalin sole Limanda sakhalinensis were studied by observing specimens obtained in a rearing experiment from fertilized eggs to the juvenile stage. The wild broodstock was collected in January 2010 and kept in a circular water tank (${\O}1.5{\times}1m$) at a temperature of $14.5{\pm}0.5^{\circ}C$. Fertilized eggs ranged from 0.72 to 0.82 mm ($0.77{\pm}0.07mm$, $mean{\pm}SD$) in diameter. The eggs were spherical, transparent and adhesive demersal. The egg yolk was divided from the oocyte 10 min after fertilization (AF), and an embryo was formed in 36 h AF. More than 50% of the eggs hatched within 133 h AF. The mouth and anus did not open until $3.5{\pm}0.25mm$ total length (TL). At 4, days after hatching (AH), the fish became larvae 3.7 to 4.2 mm ($4.0{\pm}0.36mm\;TL$), yolk absorption was completed and the mouth began to open. The left eye moved upward and the nostril moved to the right at 39 days AH. These post-larvae ranged from 8.0 to 9.9 mm TL ($8.9{\pm}1.33mm\;TL$). At 50 days AH, the fish became juveniles ($12.4{\pm}1.20mm\;TL$) There were 70-72 dorsal fin rays, 55-56 anal fin rays, 11 pectoral fin rays, and 6 ventral fin rays and the juveniles adopted a benthic life.

• The Journal of the Acoustical Society of Korea
• /
• 제25권3E호
• /
• pp.115-122
• /
• 2006

The bistatic scattering of an incident wave by a hemi-spherically capped cylinder is of particular interest because it has rarely been studied until the present day. The configuration of a hemi-spherically capped cylinder is similar to naval underwater weapons (submarines, mines, torpedos, etc.), but which is not exactly the same. This paper describes a novel laboratory experiment aimed at direct measurement of bistatic scattering by a hemi-spherically capped cylinder. Bistatic scattering by a hemi-spherically capped cylinder was measured in an acoustic water tank (5m long, 5m wide, 5m deep) using a high frequency projector (120kHz) and hydrophone. Measurements of monostatic scattering were also made under the same conditions. The bistatic scattering pattern by a hemi-spherically capped cylinder was measured against the incident angles $(0^{\circ},\;15^{\circ},\;20^{\circ},\;30^{\circ},\;45^{\circ},\;60^{\circ},\;90^{\circ})$ in order to verify various scattering pattern characteristics by the change of incident angle. The results indicate that the bistatic scattering TS at a wide scattering angle is much stronger than the mono static scattering TS. In bistatic scattering, the forward scattering TS is significantly stronger than the backward scattering TS, and the forward scattering pattern is also broader. In case of seven incident angles, the maximum value of forward scattering TS is about 14dB stronger than that of backward scattering TS. It is also found that forward scattering varies with the incident angle of sound to a much less extent than backscattering, and it is not seriously affected by the incident angle. These features could be the advantages of using forward scattering for detecting underwater targets at long range and increasing detection area and probability.

• Journal of IKEEE
• /
• 제14권3호
• /
• pp.244-249
• /
• 2010

We fabricated optical sensor system that take a measurement particles using a line-CCD in ocean. To measure particles, we used 680nm laser diode which is appropriate. we tested to operate optical system in water tank and ocean. It has performance that detected signal of sensors transfer microprocessor, FPGA as long as move up and down it's motion. The system algorithm also analysis output -pressure, temperature, particle numbers in depth.-For experiment, our particle sensor system has high accuracy counter. therefore, we proposed that a line-CCD is available on optical sensor system in ocean.