• Journal of Conservation Science
• /
• v.26 no.3
• /
• pp.335-340
• /
• 2010

Urethane resin applicable for the first transcription of historical site and transcription of soil layer were synthesized in order to replace the imported urethane resin, NS-10. Comparing to the NS-10, the urethane polymers showed similar penetration to wet soil and formed a stable layer of polyurethane during progress working the peeling off the polyurethane pre-product from epoxy surface of final product. The urethane resins used for the first transcription of historical site improved tensile strength, which is consistent with that of NS-10. In addition the urethane resin for transcription of soil layer was supplied with hardness that have a also same strong point as like NS-10. This property is advantage due to simplifying the transcription work of soil layer in backward. When we tested to the real ground soil as well as experimentation compressed soil with use these synthesis urethane resin, we ca get the satisfying result in penetration property and stability and these properties evaluated the resins as an advanced product serving better convenience for worker.

• Journal of Applied Biological Chemistry
• /
• v.44 no.4
• /
• pp.190-193
• /
• 2001

Genipin, aglycone of geniposide isolated from fruits of Gardenia jasminoides, was transformed into blue pigments through reaction with glycine and methylamine. The blue pigments formed from glycine-reacted genipin were passed through Bio-Gel P-2 resin yielding fractions GG1 and GG2, and those from methylamine-reacted genipin were separated into fractions GM1-GM4. The first eluted higher molecular-weight fractions, GG1 and GM1, had higher tinctorial strength than the later eluted lower molecular-weight fractions, GG2 and GM2-GM4, respectively. $^1H-NMR$ spectra of GG1 and GM1 showed very broad peaks indicating that structures of the pigments were highly polymeric. $^1H-NMR$ spectra of GG2, GM3, and GM4 showed several sharp peaks at aliphatic and aromatic regions with accompanying broad peaks, although the spectrum of GM2 was rather simple. Determination of the structural and physical nature of the isolated pigments is in progress.

• Journal of Sericultural and Entomological Science
• /
• v.43 no.1
• /
• pp.41-48
• /
• 2001

The purification, dissolution and powdering of stained waste silk obtained from weaving and dyeing process were studied for the surface modification of textile fabric and plastic materials. The whiteness of stained waste silk could be improved through degumming and bleaching with sodium hydrosulfite. The water-soluble fibroin solution can be obtained by dissoving the degummed waste silk in a boiling solution of 50% calcium chloride for 60 minutes. The salts and heavy metals contained in fibroin solution were removed by electric dialysis, wool fiber filtration and gel filtration chromatography. The fibroin powder was prepared by using a fine grinder after the alkali treatment for weakening the silk fiber. The fine fibroin powder of particle size around 30 ㎛ was obtained with a ultra fine-mill, while it was finer below 10 ㎛ with a ball-mill. The dissolved or powdered silk was applied to the surface of fabric with addition of the binder (a urethane resin). The moisture content of polyester and nylon fabrics treated with the silk solution was improved due to hygroscopic property of silk. The fine fibroin powder mixed with the binder ws coated on the surface of synthetic film by use of the air pressed sprayer. It was revealed that the hygroscopicity as well as the softness of fibroin powder coated film was much improved. Therefore, it is thought that the fine silk fibroin powder is applicable as an coating agent for the surface modification of plastic and synthetic leather.

• Polymer(Korea)
• /
• v.36 no.5
• /
• pp.662-667
• /
• 2012

Poly(ethylene terephthalate) (PET) base films with high light transmittance have been used for the substrate of various functional films in the flat panel display. The effects of the reflective index of coated films, the roughness of the film surface and the content of inorganic silica particles on the light transmittance were studied in this article. Light transmittance was increased by coating a water soluble resin with a low reflective index at an optimum thickness. The roughness of the film did not affect light transmittance when the Ra of the film surface was less than a quarter of the wavelength of incident light. Inorganic silica particles decreased light transmittance due to their absorbance and scattering of the incident light.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.5
• /
• pp.71-77
• /
• 2009

In a range of forms, such as latex, water-soluble polymer, liquid resin, and monomer, polymer dispersions have been widely used in the construction industry as cement modifiers because of their excellent properties, such as acid-resistance, water-proofness, and good ductility in mortar and concrete. Polymer cement slurry (polymer-modified slurry) is made of cement and polymer dispersions, with a high polymer-cement ratio of 50% or more. The purpose of this study is to evaluate the water permeability and drying shrinkage of polymer cement mortar (polymer-modified mortar) and cement concrete coated by polymer cement slurry. The polymer cement mortar and cement concrete are prepared with various polymer types, polymer-cement ratios and curing methods, and are tested for water permeability, drying shrinkage and strength. The test results showed thatthe weight of permeable water of polymer cement mortar decreases with an increase in the polymer-cement ratio, reaching a minimum at the polymer-cement ratio of 20%. In particular, the weight of permeable water of St/BA-modified mortar with a polymer-cement ratio of 20% coated with St/BA-modified slurry is about 1/55 that of unmodified mortar. The EVA- and St/BA-modified slurries coated on cement concrete have about 4 or 5 times higher drying shrinkage compared to cement concrete. The strength of polymer cement mortars tends to increase with a higher polymer-cement ratio, and is considerably higher than that of unmodified mortar. It is thus concluded that polymer cement mortars coated by polymer cement slurry are effective for industrial application, and have superior properties such as waterproofness and strengths, compared with conventional cement mortar.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.5
• /
• pp.1741-1746
• /
• 2010

This study is on development of UV-cured anti-stain coating compounds which have more improved anti-stain function to prevent a surface of PVC tile from stain. To make an anti-stain coating composition, water soluble antistatic agent made from ammonium(IV) salt, antistatic agents for acrylic and polyurethane were used. Their contents varied from 5 to 20wt% against quantities of resin in coating composition. After coating PVC tiles using bar-coating method that can adjust a thickness, we estimated surface properties of coated layer such as anti-stain, electric resistance, adhesive power, thickness of coating, and so on. Results showed that a coating composition added 15wt% of water soluble antistatic agent and coated with No.12 bar-coater had the optimum surface property in electric resistance($3.24{\times}10^9{\Omega}/cm^2$), anti-stain(ink Test, Dust Test) and adhesive power. We could also find electric resistance and anti-stain effect were improved as antistatic agent content increased. However, excessive addition of antistatic agents(over 20wt%) caused the migration.

• Analytical Science and Technology
• /
• v.14 no.1
• /
• pp.72-79
• /
• 2001

Oxidative decomposition of 2, 4, 6-trichlorophenol(TCP) was studied in aqueous solution. Iron and manganese protoporphyrin [or tetrakis(p-carboxyphenylporphyrin)] and their polymer supported derivatives were used as catalysts, and $KHSO_5$ and tert-butyldroperoxide(TBHP) as oxidants. Metalloporphyrin itself shows very poor catalytic activity in oxidative decomposition of TCP with oxidant. However, very high catalytic activity was observed when metalloporphyrin was chemically bound to newly synthesized polymers or XAD2 resin. Additionally, it revealed much higher catalytic activity in the presence of water-soluble polymers having a electron-donating axial ligand such as pyridine and immidazole. Maleic acid and chloromaleic acid were found in the resulting solution by ESI-MS. Especially, XAD2-supported metalloporphyrins can be reused as catalysts due to insolubility to solvent, and stability against oxidant.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.2
• /
• pp.608-613
• /
• 2010

This study is on development of UV-cured water soluble coating composition which have more improved anti-cigar burning to prevent a surface of PVC tile from damage of heat. To make an anti-cigar burning coating solution, thermostable agent that synthesize main materials phosphorus compound, guanidine and ammonium phosphate dibasic used temporary flame retardants, changing their contents from 10 to 30wt% against quantities of resin and compounded. After coating PVC tiles using bar-coating method that can adjust a thickness, we estimated surface properties of coated layer such as anti-cigar burning, adhesive power, chemical resistance, thickness of coating, and so on. Results showed that a coating composition added 30 wt% of phosphorus compound and coated with No.12 bar-coater had the best optimized surface property in anti-cigar burning effect, adhesive power and chemical resistance. Also, we could find anti-cigar burning effect was improved as thermostable agents content and coating thickness increased.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.15 no.1
• /
• pp.47-53
• /
• 2012

As one of the methods for recycling the FRP from the waste ships, separation of roving layer from the mat has some merits in a sense of the eco-friendly and economical recycling process. Similar characteristics, however, between the roving and the mat even with different ratio of the resin and the glass and the thickness of the roving, much thinner than the mat, make the mechanically automatic differentiation difficult. In this study spectrochemical differentiation between the two layers has been made using boiling concentrated sulfuric acid, methanol and isopropanol solution saturated with KOH, or hydrogen fluoride (HF) solution. Furthermore efficiently coloring water-soluble dye following the HF treatment makes the roving layer more distinguishable photophysically. The layer differentiation and the automatic layer distraction move up the date of simple and automatic separation process for the waste FRP.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.20 no.5
• /
• pp.1321-1326
• /
• 2006

Total ginsenosides were purified and their antioxidant, antibacterial and anticancer activities were measured. The crude extracts of ginseng, which were extracted with 75% ethanol by ultrasonification method, were firstly purified on AB-8 macroporous adsorption column to remove water soluble impurities, and decolored on Amberlite IRA 900 Cl anion-exchange column. Then, they were purified on Amberlite XAD16 adsorption column to delete the non-polar impurities. Total ginsenosides contents of the purified extracts were 79.4%, 71.7% and 72.5% in cultured wild ginseng, red ginseng and white ginseng, which were significantly increased than those of crude extracts. All of the three extracts showed concentration-dependant scavenging activities against DPPH radicals, among which white ginseng showed the most powerful activity. Cultured wild ginseng roots showed strongest effect against both B. subtilis PM 125(Gram-positive) and E. coli D31 (Gram-negative) bacteria, while red ginseng and white ginseng only showed the activity against B. subtilis. According to the result of the MTT assay, ail of the three extracts inhibited the growth of U-937 human hohistiocytic lympma cell, which were significantly different (p < 0.05) when compared to the control.