• Membrane Journal
• /
• v.29 no.5
• /
• pp.263-275
• /
• 2019

In the present study, thickness of MOR zeolite membranes was controlled by changing seed size, seeding amount, and aging time of hydrothermal solution, and then effect of membrane thickness on pervaporative ethanol dehydration for 90 wt.% ethanol-water mixture was investigated. First, nanosize MOR zeolite seeds with a diameter of 20 to 30 nm was successfully prepared by planetary milling a laboratory synthesized MOR zeolites and the coating amount was controlled by seed concentration and infiltration volume of coating solution during vacuum-assisted seeding. As seeding amount decreased, membrane thickness was reduced up to around $4{\mu}m$. The MOR zeolite membrane having a thickness of $4{\mu}m$ showed a water/ethanol separation factor of 760 and water flux of $1.0kg/m^2h$. The excellent water flux was due to the reduced membrane thickness which was derived from the nanosize seed. Therefore, it could be concluded that membrane thickness control by using nanosize seed can be a crucial factor to improve pervaporative water flux of MOR zeolite membrane.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.915-923
• /
• 2017

The by-products of red ginseng marc showing the improvement of health has been strongly studied because of the expectation of possibility to be used as the functional foods. This research was to investigate the extraction, separation, isolation, and evaluation of crude acidic polysaccharides related to antioxidant activity, sequently chemical structure of those products was evaluated by FT-IR and NMR. Compared with other solvents such as ethanol, methanol, propanol, acetone, and butanol, ethanol was selected. The concentration of red ginseng solution for extraction was selected as 10%(w/v) related to extraction yield(11.95%) and amount(11.8 mg/ml). In the ion exchange chromatography, aidic polysaccharides showing the highest antioxidant activity was obtained when eluted by distilled water. As results of structural analysis by FT-IR and NMR, peaks corresponding to C-O, C-O-O-, C-H, anomeric C-6, and repeated C-1 and C-6 linkages was to be presumed to be ($1{\rightarrow}6$) glycosidic linkage with the typical acidic polysaccharide.

• Journal of the Korean Chemical Society
• /
• v.55 no.5
• /
• pp.751-755
• /
• 2011

A doubly tethered chiral stationary phase (CSP) based on (+)-(18-crown-6)-2,3,11,12-tetracarboxylic acid was applied to the resolution of various aryl ${\alpha}$-aminoalkyl ketones with the use of 80% ethanol in water containing 10 mM sulfuric acid as a mobile phase. The chiral resolution was quite successful, the separation factors (${\alpha}$) and the resolutions ($R_S$) being in the range of 1.39-2.05 and 3.18-5.22, respectively. The separation factors (${\alpha}$) on the doubly tethered CSP were slightly worse than those on the corresponding singly tethered CSP. However, the resolutions ($R_S$) on the doubly tethered CSP were generally greater than those on the corresponding singly tethered CSP. The chromatographic behaviors for the resolution of aryl ${\alpha}$-aminoalkyl ketones on the doubly tethered CSP were demonstrated to be dependent on the type and the content of the organic and acidic modifiers in aqueous mobile phase and the column temperature.

• Applied Chemistry for Engineering
• /
• v.1 no.1
• /
• pp.52-62
• /
• 1990

Cationic polycarbonate type polyurethane was prepared from the quaternization reaction of N-methyldiethanolamine(MDEA) in urethane backbone which was obtained from the reaction of polycarbonate polyol, MDI and MDEA(chain exetender). Tensile strength and modulus of the cationic urethane resins were increased sharply with increasing the ionic content in urethane backbone. But hydrolysis resistance was decreased with increasing ionic contents. The selectivity of the cationic polycabonate urethane membrane for water/ethanol separation by pervaporation was about 20. The carrier mediated transport mechanism was considered the most probable separation mechanism for these membranes.

• Membrane Journal
• /
• v.6 no.3
• /
• pp.182-187
• /
• 1996

Hydrophilic poly(acrylonitrile) [PAN] membrane with good molecular weight cut-off characteristics were prepared by using the phase inversion method. Permeability and molecular weight cut-off of the membranes were measured through the ultrafiltration test. On the surface of the PAN support membranes, poly(acrylic acid) [PAA] was deposited by dip-coating. The water permeability of the PAN support membrane had $0.17~31\textrm{mm}^3/m^{2} \cdot s \cdot Pa$, the molecular weight cut-off 42, 000~150, 000. The transport characteristics of the prepared composite membranes were significantly affected by the variation of the support membrane mophology. The permeability of the composite membrane was decreased with increasing molecular weight cut-off of the support membrane, and the separation factor was slightly changed depending on the feed concentration.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.6
• /
• pp.1839-1844
• /
• 2013

Molecularly imprinted microsphere for chloramphenicol (CAP) with high adsorption capacity and excellent selectivity is prepared by aqueous suspension polymerization, in which chloramphenicol is used as template molecule and ethyl acetate as porogen. The CAP-imprinted microspheres are used as high performance liquid chromatography (HPLC) stationary phase and packed into stainless steel column ($150mm{\times}4.6mm$ i.d.) for selective separation of chloramphenicol. HPLC analysis suggests that chloramphenicol can be distinguished from not only its structural analogs but also other broad-spectrum antibiotic such as erythromycin and tetracycline. In addition, the binding experiments of CAP-imprinted microspheres are carried out in ethanol/water (1:4, V:V), the results indicate that the maximum apparent static binding capacity of molecularly imprinted microspheres is up to 66.64 mg $g^{-1}$ according to scatchard model.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1993.10a
• /
• pp.56-57
• /
• 1993

고분자 막을 통한 투과증발에서의 전달기구는 액체 혼합액의 막으로의 용해, 막을 통한 확산, 막 하부에서의 증발을 거쳐 분리가 일어난다고 알려져 있다. 이때 투과증발의 선택도는 수착선택도와 확산선택도의 곱으로 표현 될 수 있다(1). 물의 선택적 분리의 관점에서 친수성 고분자 막을 이용하는 경우, 선택도는 대부분 수착선택도에 기인하며, 우수한 투과속도와 함께 집중적인 연구의 대상이 되었으나 가소화 현상이 심하게 일어나는 단점이 있다. 한편 소수성 고분자 막을 이용하는 경우의 투과 증발 선택도는 대부분 확산선택도에 기인하며, 가소화 현상은 억제되나 투과속도가 낮은 단점이 있다. 그러나 소수성 고분자 막을 이용하는 경우에도 물에 대해 높은 선택도를 달성 할 수 있는데, 예를 들어 polystyrene(PS)으로 만들어진 고분자 막 및 fluoroalkylacrylatemethylstyrene copolymer로 만들어진 고분자 막은 물-에탄올 공급액으로 부터 물에 대한 높은 선택성을 보여주고 있다(2,3). 그러므로 막분리층의 두께를 가능한 한 얇게 하면 분리에 유효한 막이 될 수 있다.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.250-255
• /
• 2003

TMA clathrate that is used as PCM of low temperature thermal storage system in this research creates hydrate crystallization at higher temperature then pure water, and its application is expected as PCM because of comparatively big latent heat without phase separation phenomenon. Acetone, Ethylen Glycol, and Ethanol is used as additive and evaluated experimentally for the purpose of the improvement in subcooling of TMA clathrate. In view of the results so far achieved subcooling is improved, the running time of the refrigerator is reduced. Thus the results are expected to use for the increase of coefficient of performance of low temperature thermal storage system in the building.

• Analytical Science and Technology
• /
• v.17 no.6
• /
• pp.532-535
• /
• 2004

A method on the determination of Co(II) after adsorbing of Co(II) on 2-mercaptobenzothiazole-loaded silica gel was studied. The conditions on the separation of Co(II) such as pH of solution, the amount of 2-mercaptobenzothiazole, the flow rate for adsorption, and the desorption solvent were optimized to 9.0, 0.05 g, $10mL\;min^{-1}$ and 1 M $HNO_3$ in ethanol, respectively. Under these optimum conditions, the calibration curve of Co(II) was obtained over concentration range of $2{\sim}120ng\;mL^{-1}$. The detection limit was $0.6ng\;mL^{-1}$. Recovery yields of Co(II) in various natural water samples were more than 90%.

• Applied Chemistry for Engineering
• /
• v.5 no.1
• /
• pp.127-138
• /
• 1994

In the process of pervaporation separation for aqueous ethanol solution through cellulose tai-acetate(CTA) membrane, the modelling on the solution-diffusion permeation mechanism was built up on the basis of sorption and permeation experimental results. Also its function type and parameter were examined. The composition of sorption equilibrium in three component system(Ethanol/Water/CTA) were compared with the calculated value by Flory-Huggins' equation using the pure component sorption data. In order to apply the thermodynamic equilibrium relationship between the membrane free composition in the membrane and the equilibrium composition in the liquid phase, the apparent activity this system, however, the results were not satisfied. Diffusion equations were expressed with the concentration gradient considering permeate alone, and a concentration-dependent diffusion coefficient which includes a parameter was used. And this model was fitted with the measured permeation rates. If the permeation rate and the amount of sorption of one component were much larger than those of the other, the bulk flow term could not be negligible. The flux and selectivity were increased with increasing temperature, and with decreasing downstream pressure.