• Bulletin of the Korean Chemical Society
• /
• 제12권3호
• /
• pp.265-270
• /
• 1991

Theoretical calculations on the stabilization energies of framework atoms in hydrolyses Co(Ⅱ )-exchanged zeolite A were made using some potential energy functions and optimization program. The protons which are produced by hydrolysis of $[Co(H_2O)_n]^{2+}$ ion in large cavity showed a tendency to attack the framework oxygen atom O(1) preferentially, and the oxygen atom O(4) within OH- ion was coordinated at Al atom. The weakness of bonds between T(Si, Al) and oxygen by attack of proton and too large coordination number around small aluminum atom will make the framework of Co(Ⅱ)-exchanged zeolite A more unstable. The stabilization energy of $Co_4Na_4$-A framework (- 361.57 kcal/mol) was less than that of thermally stable zeolite A($Na_{12-}$A: - 419.68 kcal/mol) and greater than that of extremely unstable Ba(Ⅱ)-exchanged zeolite A($Ba_{6-}$A: - 324.01 kcal/mol). All the data of powder X-ray diffraction, infrared and Raman spectroscopy of Co(Ⅱ)-exchanged zeolite A showed the evidence of instability of its framework in agreement with the theoretical calculation. Three different groups of water molecules are found in hydrated Co(Ⅱ )-exchanged zeolite A; W(Ⅰ) group of water molecules having only hydrogen-bonds, W(Ⅱ) group water coordinated to $Na^+$ ion, ans W(Ⅲ) group water coordinated to Co(Ⅱ) ion. The averaged interaction energy of each water group shows the decreasing order of W(Ⅲ)>W(Ⅱ)>W(Ⅰ).

• Journal of Information Display
• /
• 제10권4호
• /
• pp.137-142
• /
• 2009

Transparent top-gate Al-Zn-Sn-O (AZTO) thin-film transistors (TFTs) with an $Al_2O_3$ protective layer (PL) on an active layer were studied, and a transparent 2.5-inch QCIF+AMOLED (active-matrix organic light-emitting diode) display panel was fabricated using an AZTO TFT backplane. The AZTO active layers were deposited via RF magnetron sputtering at room temperature, and the PL was deposited via two different atomic-layer deposition (ALD) processes. The mobility and subthreshold slope were superior in the TFTs annealed in vacuum and with oxygen plasma PLs compared to the TFTs annealed in $O_2$ and with water vapor PLs, but the bias stability of the TFTs annealed in $O_2$ and with water vapor PLs was excellent.

• 한국세라믹학회지
• /
• 제19권2호
• /
• pp.95-100
• /
• 1982

Instead of barium carbonate, domestic barite was used as the flux in manufacturing theinsulating porcelain. To avoid the problems arising from the decomposition of barite in the body during firing, BaO.$Al_2O_3$ was synthesized at $1300^{\circ}C$ for 5 hours. synthetic BaO.$Al_2O_3$ was mixed with other materials such as kaoline, alumina, clay, dolomite. The RO content (CaO. MgO. BaO) of the batches was varied from range of 4 to 14wt. % at 2wt. % - intervals, and firing temperature was varied from 1280 to 140$0^{\circ}C$-at 4$0^{\circ}C$ intervals The properties such as water absorption, bulk density. mechnical strength, specific resistance, and linear shrinkage were measured. The body containing 12 wt.% of RO content showed the satisfactory for the application in the Fixed Carbon Film Resistor.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1630-1636
• /
• 2009

Nine alkali-activated (AA) mortars were mixed and cured at water or air-dried conditions to explore the significance and limitation for the application of the combination of Ba and Ca ions as an alkali-activator. Ground granulated blast-furnace slag (GGBS) was used for source materials, and calcium hydroxide (Ca(OH)₂) and barium hydroxide (Ba(OH)₂) were employed as alkali activators. Test results clearly showed that the water curing condition was more effective than the air-dried curing condition for the formation of the denser calcium silicate hydrate (C-S-H) gels that had a higher molar Si/Ca ratio, resulting in a higher strength development. At the same time, the introduction of Ba(OH)₂ led to the formation of 2CaO·Al₂O₃·SiO₂·8H₂O (C₂ASH₈) hydrates with higher molar Si/Al and Ca/Al ratios. Based on the test results, it can be concluded that the developed cementless mortars have highly effective performance and high potential as an eco-friendly sustainable building material.

• 자원리싸이클링
• /
• 제12권5호
• /
• pp.23-28
• /
• 2003

전로슬래그에 시약급 $SiO_2$와 $Al_2O_3$를 5~10wt% 첨가하고 환원.개질후 수냉한후 시멘트 혼화재로의 사용을 검토하였다. 보통 포틀랜드 시멘트에 혼화재를 10~30wt% 혼합하여 9종류의 혼합시멘트를 제조하여, 혼화재의 종류와 혼합양에 따른 혼합시멘트의 모르타르 압축강도를 시험하고, 보통 포틀랜드 시멘트 모르타르의 압축강도와 비교하였다. 또한, 혼합시멘트의 수화반응을 주사전자현미경과 X선 회절로 분석하고, 시멘트 모르타르의 압축강도에 미치는 혼화재의 영향을 조사하였다.

• 대한치과보철학회지
• /
• 제49권1호
• /
• pp.49-56
• /
• 2011

연구 목적: 최근 지르코니아가 전부도재관의 코어로 많이 사용되고 있다. 지르코니아와 레진 시멘트의 결합 강도를 높이기 위한 기계적, 화학적인 표면 처리 방법들이 연구되고 있다. 이 연구에서 여러 표면 처리 방법에 따른 지르코니아와 레진 시멘트의 전단결합강도를 알아보고자 한다. 연구 재료 및 방법: 80개의 지르코니아 (Lava, 3M ESPE, St. Paul, MN, USA) 시편과 80개의 지르코니아/알루미나 복합체 (Zirace, Acucera Co Inc, Korea) 시편을 디스크형태로 제작하여 에폭시레진에 매립하였다. 이들을 각각 4개의 군으로 나누어 $50\;{\mu}m$ $Al_2O_3$ sandblasting, $110\;{\mu}m$ $Al_2O_3$ sandblasting, $50\;{\mu}m$ $Al_2O_3$ sandblasting과 프라이머 (Z-PRIME Plus, Bisco Inc, Schaumburg, IL, USA) 사용, $110\;{\mu}m$ $Al_2O_3$ sandblasting과 프라이머 (Z-PRIME Plus) 사용 군으로 나누었다. 표면 처리한 지르코니아 표면에 2가지 레진 시멘 (Calibra, Panavia F)으로 접착하였다. 그 후 증류수 ($37^{\circ}C$)에 24시간 보관 후 전단 결합 강도 실험을 시행하였고, SEM을 사용하여 표면 처리한 표면과 전단강도 실험 후 파절양상을 관찰하였다. 결과: ANOVA분석에 따르면, 두 가지 종류의 시편 모두에서, 프라이머 (Z-PRIME Plus)를 사용하여 표면 처리한 군들이 전단 결합 강도가 높았다 (P < .05). 결론: 기계적 결합 강도와 함께 새로운 프라이머를 사용하는 것이 지르코니아와 레진 시멘트의 접착 강도를 증가시킨다.

• Bulletin of the Korean Chemical Society
• /
• 제19권12호
• /
• pp.1363-1368
• /
• 1998

Mo/γ-Al2O3 catalysts were prepared by impregnation method in various conditions to identify the states of surface Mo species. TPR (Temperature-Programmed Reduction) and Raman spectroscopy were applied to analyze the surface Mo species. TPR analysis revealed that MoO3 was reduced to Mo through MoO2, the intermediate state and the increase of Mo loading enhanced the reducibility of Mo oxide till the formation of monolayer coverage. High temperature calcination induced oxygen defects in MoO3 giving their unstable states for easier reduction. Raman spectroscopy analysis showed that the increase of Mo loading induced the polymeric Mo oxide.

• 한국세라믹학회지
• /
• 제47권5호
• /
• pp.401-406
• /
• 2010

For the lower-temperature preparation of calcium monoaluminate(CA, C:CaO, A:$Al_2O_3$) clinker which is hard to synthesize purely within its melting point, an equimolar hydrate was obtained and then used as a starting raw material of clinker burning. The hydrate was prepared from a mixture of waste oyster shell and industrial aluminium hydroxide by heating to $1200^{\circ}C$, grinding and mixing with water. The hydrate was composed of amorphous aluminium hydroxide and $C_3AH_6$(H:$H_2O$) formed by resolution-precipitation mechanism of the system C-A-H. By heating the hydrate, nearly pure and porous calcium monoaluminate clinker was formed at $1400^{\circ}C$ which is fairly lower temperature than that of its melting point. The formation of calcium monoaluminate was performed mainly by the reaction between amorphous alumina and $C_{12}A_7$ caused by the decomposition of $C_3AH_6$. The immediate and earlier formation of $C_{12}A_7$ seemed to be accelerated by not only high surface area and instability of the thermally decomposed hydrate but also the catalytic effect of water decomposed from the hydrate. The final calcium monoaluminate clinker was very porous because of the influence of highly porous shape of the thermally decomposed hydrate.

• Nuclear Engineering and Technology
• /
• 제48권4호
• /
• pp.915-924
• /
• 2016

After a severe accident to the nuclear reactor, the in-vessel retention strategy is a key way to prevent the leakage of radioactive material. Nanofluid is a steady suspension used to improve heat-transfer characteristics of working fluids, formed by adding solid particles with diameters below 100nm to the base fluids, and its thermal physical properties and heat-transfer characteristics are much different from the conventional working fluids. Thus, nanofluids with appropriate nanoparticle type and volume concentration can enhance the heat-transfer process. In this study, the moving particle semi-implicit method-meshless advection using flow-directional local grid method is used to simulate the bubble growth, departure, and sliding on the downward-facing heating surface in pure water and nanofluid (1.0 vol.% $Al_2O_3/H_2O$) flow boiling processes; additionally, the bubble critical departure angle and sliding characteristics and their influence are also investigated. The results indicate that the bubble in nanofluid departs from the heating surface more easily and the critical departure inclined angle of nanofluid is greater than that of pure water. In addition, the influence of nanofluid on bubble sliding is not significant compared with pure water.

• Journal of Biosystems Engineering
• /
• 제32권6호
• /
• pp.448-454
• /
• 2007

This study was conducted to develop a 100 kPa soil tensiometer mainly consisted of a porous ceramic cup, water-holding tube, and a digital vacuum gauge, through theoretical design analysis and experimental performance evaluation. Major findings were as follows. 1. Theoretical analysis showed that air entry value of a porous media decreased as the maximum effective size of the pore increased, and the maximum diameter of the pores was $2.9\;{\mu}m$ for measuring up a 100 kPa of soil-water tension. 2. Property analysis of tensiometer porous cups supplied in Korean domestic market indicated that main components were $SiO_2$ and $Al_2O_3$ with a porosity range of $33.8{\sim}49.3%$. 3. The porous cup selected through sample fabrication and air-permeability tests showed weight ratios of 87% and 11% for $Al_2O_3$ and $SiO_2$. The analysis of SEM (scanning electron microscope) images showed that the sample was sintered at temperatures of about $1150^{\circ}C$, which consisted of pores with sizes of up to 25% of those for commercial porous cups. 4. The prototype soil tensiometer was fabricated using the developed porous cup and a digital vacuum gauge that could measure water tension with a pressure of 85 kPa in air tests. 5. In-soil tests of the prototype conducted during a period of 25-day drying showed that soil-water tension values measured with the prototype and commercial units were not significantly different, and soil-water characteristic curves could be established for different soils, confirming accuracy and stability of the prototype.