• Journal of the Korean Society of Propulsion Engineers
• /
• v.11 no.5
• /
• pp.72-77
• /
• 2007

The combustion test results of the sub-scale combustor having dual swirl injector with internal mixing for a liquid rocket engine are described. The sub-scale combustor uses liquid oxygen(LOx) and kerosene as propellants and has an injector head, an ablative material combustor wall and a water cooled nozzle. The injector head has LOx manifold, fuel manifold, fire face plate, one center swirl injector and 18 main swirl injectors of internal mixing. The combustion tests were successfully performed at design and off-design points without any damages on the injectors. Combustion characteristics velocity of 1756m/s was measured at design point. High frequency combustion instability was not observed but low frequency pulsations occurred at off-design conditions.

• Journal of architectural history
• /
• v.19 no.6
• /
• pp.7-22
• /
• 2010

This study includes a review of the relevant literature and data on the Gyeolseong Eupseong, a coastal castle town of the Joseon Period. During the process of building the Gyeolseong Eupseong, Eupchi(administrative office) was transferred to several different locations for the following reasons:. first, to strengthen defensive capabilities by utilizing the locational advantages of the Seokdang Mountain Fortress, second, to secure sufficient space for holding the castle and have access to water in times of emergencies, third, to strengthen coastal defence by utilizing geographical advantages. Most of the Gyeolseong Eupseong was damaged during the Japanese colonial period. At present, there remain only part of the castle's facilities and some facilities that were restored later in modern times; 4 building sites have been identified. Remaining and destructed buildings can be identified through old maps(the local maps of 1872) and Zirizi and Eupzi(geography books). Also identified were 2 castle gate sites where a 1,500m-long stone castle wall and an ongseong(a crescent-shaped defensive structure), 5 chiseongs, and a most were constructed. The Gyeolseong area is assumed to have been a strategic foothold to defend the west coast from the days before the Three Kingdom Period. However it is very difficult to find any records created before the Joseon Period. Therefore, the time of the restoration of the Eupchi should be determined based on records created in the late Joseon Period. Finally, excavation work needs to be done to identify the locations of the castle's facilities.

• Korean Journal of Medicinal Crop Science
• /
• v.17 no.6
• /
• pp.379-387
• /
• 2009

The aim of this investigation was to examine the influence of extrusion on dietary fiber profile and the content of bioactive compounds, rutin and quercetin in young sprout, whole seed, and matured stem of Tartary buckwheat. WSI(water soluble index) is increased by a function of both screw profile and process temperature, compared to control in different parts of Buckwheat. Also, WSI of ME is increased more than 5.2 times in grain, compared to that of control. The effect of precooking by extrusion on the dietary fiber profile of buckwheat flour was evaluated. Precooking by extrusion significantly increased SDF in flour, although in most cases extrusion decrease in TDF a little. The thermo-mechanical treatment undergone by the buckwheat flour during extrusion led to redistribute part IDF fraction to SDF, leading to an increase in the latter. The content of rutin was increased about two fold in extruded flour of sprout, compared to in control. This increase maybe why these compounds are released from cell wall by high shear processing under high temperature.

• International Journal of Fluid Machinery and Systems
• /
• v.3 no.4
• /
• pp.315-323
• /
• 2010

This work investigates the influence of water compressibility on pressure pulsations induced by rotor-stator interaction (RSI) in hydraulic machinery, using the commercial CFD solver ANSYS-CFX. A pipe flow example with harmonic velocity excitation at the inlet plane is simulated using different grid densities and time step sizes. Results are compared with a validated code for hydraulic networks (SIMSEN). Subsequently, the solution procedure is applied to a simplified 2.5-dimensional pump-turbine configuration in prototype with different speeds of sound as well as in model scale with an adapted speed of sound. Pressure fluctuations are compared with numerical and experimental data based on prototype scale. The good agreement indicates that the scaling of acoustic effects with an adapted speed of sound works well. With respect to pressure fluctuation amplitudes along the centerline of runner channels, incompressible solutions exhibit a linear decrease while compressible solutions exhibit sinusoidal distributions with maximum values at half the channel length, coinciding with analytical solutions of one-dimensional acoustics. Furthermore, in compressible simulation the amplification of pressure fluctuations is observed from the inlet of stay vane channels to the spiral case wall. Finally, the procedure is applied to a three-dimensional pump configuration in model scale with adapted speed of sound. Normalized Pressure fluctuations are compared with results from prototype measurements. Compared to incompressible computations, compressible simulations provide similar pressure fluctuations in vaneless space, but pressure fluctuations in spiral case and penstock may be much higher.

• Journal of the Korean Ceramic Society
• /
• v.50 no.4
• /
• pp.263-268
• /
• 2013

Porous biphasic calcium phosphate scaffolds were fabricated by a freeze-gel casting technique using a tertiary-butyl alcohol (TBA)-based slurry. After sintering, unidirectional macropore channels of scaffolds aligned regularly along the TBA ice growth direction were tailored simultaneously with micropores formed in the outer wall of the pore channels. The crystallinity, micro structure, pore configuration, bulk density, and compressive strength for the scaffolds were investigated with X-ray diffractometery, scanning electron microscopy analysis, a water immersion method, and a universal test machine. The results revealed that the sintered porosity and pore size generally resulted in a high solid loading which resulted in low porosity and small pore size, which relatively increased the higher compressive strength. After being sintered at $1100-1300^{\circ}C$, the scaffolds showed an average porosity and compressive strength in the range 35.1-74.9% and 65.1-3.0 MPa, respectively, according to the processing conditions.

• Microbiology and Biotechnology Letters
• /
• v.40 no.3
• /
• pp.282-285
• /
• 2012

In this study, the ability of Chlorella vulgaris and Dunaliella salina to use biomass resources for anaerobic digestive biogas production was examined. The differences in cell wall structure pretreatments affecting the yield of soluble products showed that D. salina is a better candidate for biogas production than C. vulgaris. There was no significant difference between pretreated and non-pretreated D. salina in terms of methane production yield by inocula obtained from anaerobic digestion systems. Therefore, D. salina is a suitable algal biomass for biogas production due to its high biomass productivity, simple pretreatment needs, and easy conversion to biogas.

• Journal of Soil and Groundwater Environment
• /
• v.7 no.1
• /
• pp.41-51
• /
• 2002

Recently, domestic waste landfills are constructed sometimes on seashore area to provide large landfill area. In order to strengthen the foundation of landfills and to prevent the infiltration of leachate through the bottom, many cases of constructing cement hardened liners on seashore clays are found. In these cases, it is possible to have cracks in the hardened liners due to settlement with waste load since the stiffness of the hardened liner Is greater than that of clay liners. In this study, the capability of Self-Sealing and Self-Healing (SSSH) liner made with a seashore clay in the metropolitan landfill to prevent the percolation of water and leachate is examined using flexible-wall permeameter test and using uniaxial compression test. Applicability of SSSH to weathered granitic soil is also examined for self-sealing capabilities. The result of Flexible permeameter test for SSSH with the seashore clay showed that permeability obtained was lower than permeability criteria of Korean waste management law. The permeability and strength characteristics of SSSH with granitic soil and bentonite showed better results than with the seashore clay.

• Nuclear Engineering and Technology
• /
• v.31 no.5
• /
• pp.486-497
• /
• 1999

The local heat transfer coefficient is experimentally investigated for the reflux condensation in a countercurrent flow between the steam-air mixture and the condensate, A single vertical tube has a geometry which is a length of 2.4m, inner diameter of 16.56mm and outer diameter of 19.05mm and is made of stainless steel. Air is used as a noncondensible gas. The secondary side has a shape of annulus around vertical tube and the lost heat by primary condensation is transferred to the coolant water. The local temperatures are measured at 11 locations in the vertical direction and each location has 3 measurement points in the radial direction, which are installed at the tube center, at the outer wall and at the coolant side. In three different pressures, the 27 sets of data are obtained in the range of inlet steam flow rate 1.348∼3.282kg/hr, of inlet air mass fraction 11.8∼55.0%. The investigation of the flooding is preceded to find the upper limit of the reflux condensation. Onset of flooding is lower than that of Wallis' correlation. The local heat transfer coefficient increases as the increase of inlet steam flow rate and decreases as the increase of inlet air mass fraction. As an increase of the system pressure, the active condensing region is contracted and the heat transfer capability in this region is magnified. The empirical correlation is developed by 165 data of the local heat transfer. As a result, the Jacob number and film Reynolds number are dominant parameters to govern the local heat transfer coefficient. The rms error is 17.7% between the results by the experiment and by the correlation.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.6
• /
• pp.30-35
• /
• 2013

To conserve wood resources for papermaking, chemical compositions of the hemp (Cannabis sativa L.) bast fiber cultivated in Korea such as holocellulose, ${\alpha}$-cellulose, lignin, alcohol-benzene extractives, hot and cold water extractives, and ash contents were investigated to manufacture the specialty packaging paper effectively. Significantly very low klason lignin content of 3.3% was accomplished by removing of the outer shell of bark. Laboratory soda pulping method which is very useful for the nonwood fiber was adapted, and it was found that there was no significant difference in both kappa number and H-factor between 25% and 30% NaOH charge. Hemp pulp cooked with the laboratory digester in 25% NaOH at $170^{\circ}C$ were mixed together with the wood pulp(NBKP:LBKP=1:1) in order to find the optimum mixture ratio which exhibited acceptable paper strength properties such as tensile index, burst index, and tear strength. When 10% of hemp soda pulps was mixed with 90% of wood pulps comprised of SwBKP and HwBKP (1:1), all physical strength increased significantly. The physical strength decreased as the amount of hemp pulp increased because the cell wall of bast fiber is very thick which causes low conformability and low fiber-fiber bonding. These results showed that paper made of hemp-wood pulp can be used for the specialty packaging paper which requires both the characteristic surface properties and the high physical strength of hemp fiber.

• Parasites, Hosts and Diseases
• /
• v.53 no.5
• /
• pp.545-551
• /
• 2015

Schistosomiasis is one of the important neglected tropical diseases (NTDs) in Tanzania, particularly in Lake Victoria zone. This baseline survey was a part of the main study of integrated control of schistosomiasis and soil-transmitted helminths (STHs) aimed at describing morbidity patterns due to intestinal schistosomiasis among adults living on Kome Island, Sengerema District, Tanzania. Total 388 adults from Kome Islands (about 50 people from each village) aged between 12 and 85 years, were examined by abdominal ultrasound according to the Niamey protocol. Liver image patterns (LIPs) A and B were considered normal, and C-F as distinct periportal fibrosis (PPF). The overall prevalence of PPF was 42.2%; much higher in males than in females (47.0% in male vs 34.4% in females, P=0.007). Abnormal increase of segmental branch wall thickness (SBWT) and dilated portal vein diameter (PVD) were also more common in males than in females. Hepatosplenomegaly was frequently encountered; 68.1% had left liver lobe hepatomegaly and 55.2% had splenomegaly. Schistosoma mansoni-related morbidity is quite high among adults in this community justifying the implementation of integrated control strategies through mass drug administration, improved water supply (pumped wells), and health education that had already started in the study area.