• Fashion & Textile Research Journal
• /
• v.19 no.4
• /
• pp.493-503
• /
• 2017

This study investigated water vapor permeability of the 73 breathable fabrics for sports-wear according to the materials, finishing methods and fabric structural parameters. The water vapor permeability by KS K 0594 method of PET breathable fabric was superior than that of nylon one, in addition, water vapor permeability of coated or laminated breathable fabrics were higher than those of hot melt or dot laminated fabrics. The water vapor permeability of breathable fabric was dependent on the thickness, weight and density, which was consistent with measuring method. However, water vapor permeability according to materials and finishing method showed different results according to measuring method. The correlation coefficient of WVP of PET breathable fabrics between ISO and KS K measuring methods was -0.83 and the correlation coefficient of WVP of coated breathable fabrics was -0.72 and -0.71 for KS K and ASTM and -0.72 for KS K and ISO in hot melt laminated breathable fabrics. According to regression analysis, WVP of PET breathable fabric by both KSK and ISO measuring methods was highly dependent upon on the density and weight. In addition, WVP of hot melt laminated breathable fabric was highly dependent upon thickness, weight and density. Therefore, relevant measuring method for WVP of breathable fabrics has to be adopted to measure precise breathability.

• Macromolecular Research
• /
• v.17 no.7
• /
• pp.528-532
• /
• 2009

The size and shape of free volume (FV) holes available in membrane materials control the rate of gas diffusion and its permeability. Based on this principle, a segmented, thermo-sensitive polyurethane (TSPU) membrane with functional gate, i.e., the ability to sense and respond to external thermo-stimuli, was synthesized. This smart membrane exhibited close-open characteristics to the size of the FV hole and water vapor permeation and thus can be used as smart food packaging materials. Differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), positron annihilation lifetimes (PAL) and water vapor permeability (WVP) were used to evaluate how the morphological structure of TSPU and the temperature influence the FV holes size. In DSC and DMA studies, TSPU with a crystalline transition reversible phase showed an obvious phase-separated structure and a phase transition temperature at $53^{\circ}C$ (defined as the switch temperature and used as a functional gate). Moreover, the switch temperature ($T_s$) and the thermal-sensitivity of TSPU remained available after two or three thermal cyclic processes. The PAL study indicated that the FV hole size of TSPU is closely related to the $T_s$. When the temperature varied cyclically from $T_s-10{\circ}C$ to $T_s+10^{\circ}C$, the average radius (R) of the FV holes of the TSPU membrane also shifted cyclically from 0.23 to 0.467 nm, exhibiting an "open-close" feature. As a result, the WVP of the TSPU membrane also shifted cyclically from 4.30 to $8.58\;kg/m^2{\cdot}d$, which produced an "increase-decrease" response to the thermo-stimuli. This phase transition accompanying significant changes in the FV hole size and WVP can be used to develop "smart materials" with functional gates and controllable water vapor permeation, which support the possible applications of TSPU for food packaging.

• Food Science and Biotechnology
• /
• v.14 no.1
• /
• pp.108-111
• /
• 2005

To improve water-resistance and physical properties of sodium alginate film, effects of sodium alginate and plasticizer concentrations, divalent cation types and concentrations, and immersion time of films into divalent cation solutions on sodium alginate films were evaluated, based on elongation strength (ES), elongation rate (E), water vapor permeability (WVP), and water solubility (WS). Film made from 1.5% sodium alginate solution (w/w) had low WVP and WS, which are optimal characteristics for application of film preparation. Addition of plasticizer increased E and WS. Less than 2% $CaCl_2$ addition and 15min immersion time reduced WVP, WS, and E significantly (p<0.05). Sodium alginate films treated with $CuCl_2$, and $ZnCl_2$ solutions had lower WVP and WS, whereas $MgCl_2$ had no influence on improving water resistance of films.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.2 no.2
• /
• pp.122-125
• /
• 1997

The utilization of excess whey is necessary to reduce dairy waste because the large amount of whey disposal in waste streams has caused environmental problems. During whey protein film production as the effective means of utilization of excess whey, we have examined the effects of pH, temperature, and plasticizers for water vapor permeability(WVP), tensile strength(TS), and elongation rate(%E) of the whey protein films. The 10% whey protein films had the highest WVP(28.73g$.$mm/kPa$.$day$.$㎡) and TS(1.85${\pm}$0.11Mpa). But, in this case, an increase of WVP was caused by the thickness of whey protein films. At the concentration of 8% whey protein, appropriate thickness was obtained. Whey protein films prepared at the pH 6.75 and 95$^{\circ}C$ showed lower WVP(28.38g$.$mm/kPa$.$day$.$㎡) and elongation rate(12.9%) and higher TS value(3.769${\pm}$0.407 MPa) than at the pH 6.75 and 75$^{\circ}C$. As the temperature increased, WVP of films decreased slightly and tensile strength increased slightly, while elongation rate decreased significantly. Higher WVP and TS were observed at pH6.75 compared to pH7-9. In contrast, significantly higher elongation was observed at pH 9comapred to pH6.75-8. Among the plasticizer types used, the addition of sorbitol showed the highest TS value(6.244${\pm}$0.297 MPa) at the concentration 0.4g sorbitol and elongation rate(49%) at the concentration of 0.6g sorbitol.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.33 no.5
• /
• pp.413-417
• /
• 2000

The effects of film processing conditions on the water vapor permeability (WVP), the solubility of film's protein (SFP) and the soluble film's meterials amount (SFMA) were investigated to establish the conditions for preparing biodegradable and edible Alaska Pollack meal protein isolate (APMPI) film. ms of film were decreased with increasing plasticizer concentration but those were decreased with decrement of APMPI's pH values. SEPs were decreased with increasing APMPI's pH and plasticizer concentration. SFMAS were also strongly affected by plasticizer concentration and APMPI's pH. In the case of adding different plasticizers, WVP was increased in order as follows: glycerol, polyethylene glycol and sorbitol but SFMA showed inverse order.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.46 no.3
• /
• pp.394-399
• /
• 2017

To resolve environmental pollution caused by synthetic packaging materials, biodegradable films have been studied as an alternative. In this study, we prepared rockfish skin gelatin (RFG) and nano-clay (Cloisite $Na^+$ and Cloisite 10A) composite films to compare the effects of nano-clay on the physical properties of RFG film. Gelatin was extracted from rockfish skin and used to prepare RFG film with sorbitol as a plasticizer. Tensile strength (TS), water vapor permeability (WVP), and water solubility (WS) of the RFG film were 15.0 MPa, $2.70{\times}10^{-9}g\;m/m^2\;s\;Pa$, and 53.8%, respectively. Addition of nano-clay to the RFG film increased TS and decreased WVP and WS. The X-ray diffraction analysis and scanning electron microscopic results suggest that RFG/nano-clay composite films formed an exfoliated structure. These results indicate that RFG/nano-clay composite films can be applied as biodegradable packaging materials in the food industry.

• Fibers and Polymers
• /
• v.3 no.4
• /
• pp.153-158
• /
• 2002

A series of waterborne polyurethanes (WBPU) were prepared from 4,4-dicyclohexylmethane diisocyanate ($H_{12}$MDI),2,2-bis(hydroxylmethyl) propionic acid (DMPA), othylenediarnine (EDA), triethylamine (TEA), and triblock glycol [TBG, ($\varepsilon$-caprolactone)$_{4.5}$-poly(tetramethylene ether) glycol (MW= 2000)-($\varepsilon$-caprolactone)$_{4.5}$: $(CL)_{4.5}$-PTMG-$(CL)_{4.5}$, MW=3000] as a soft segment. Two melting peaks of TBG at about 14$^{\circ}C$ and 38$^{\circ}C$ were observed indicating the presence of two different crystalline domains composed of CL and PTMG dominant component. The effect of soft segment content (60-75 wt%) on the colloidal properties of dispersion, and thermal and mechanical properties of WBPU films, the water vapor permeability (WVP) and water resistance (WR) of WBPU-coated Nylon fabrics, and the adhesive strength of WBPU- coated layer and Nylon fabrics was investigated. As soft segment contents increased, the water vapor permeability of WBPU- coated Nylon fabrics increased from 3615 to 4502 g/$m^2$day, however, the water resistances decreased from 1300 to 500 mm$H_2$O.O.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.32 no.5
• /
• pp.582-586
• /
• 1999

The processing conditions for producing and edible alginate film from sea tangle were investigated by measuring water vapor permeability (WVP), tensile properties and colors of film. The alginates were extracted with $3\%$ sodium carbonate ($Na_2CO_3$) solution for 5 hrs, and the alginate films were prepared with extracted sodium alginates, D-gluconic acid lactone, $CaCO_3$ and various plasticizers, As the concentration of alginate in making the film was increased, the WVP and elongation of the film were decreased and the tensile strength was increased. The higher amount of plasticizer showed the higher WVP and elongation, and the order of various plasticizers in increasing the WVP and elongation of the film was glycerol, polyethylene glycol, and sorbitol. The addition of sorbitol in the film showed the highest value (89.57) in lightness of Hunter color system and the film added polyethylene glycol had the highest values (-1,12 and 11.4) in redness and yellowness.

• Korean Journal of Food Science and Technology
• /
• v.29 no.2
• /
• pp.255-260
• /
• 1997

Glucomannan was isolated from konjac (Amorphophallus konjac) flour by precipitating in aqueous alcohol solution. Konjac glucomannan films were prepared at various concentrations up to 1.0% (w/v) in aqueous glycerol solutions. Tensile strength (TS), percent elongation (E), water vapor permeability (WVP) as the barrier property and the solubility of the films were varied with glucomannan concentrations, glycerol contents and storage humidities. TS was decreased as the glucomannan concentration in the film and relative humidity for storage increased, and E was vice versa. WVP showed better barrier properties compared with other polysaccharides films. Glycerol contents in the film significantly affccted TS and E, but did not affect WVP. The glucomannan films were completely dissolved in the water by 150 min stirring at room temperature.

• Food Science and Biotechnology
• /
• v.14 no.1
• /
• pp.112-116
• /
• 2005

Composite films were prepared with soy protein isolate (SPI) and various clay minerals by casting from polymer and clay water suspension. Effects of clay minerals on film thickness, moisture content (MC), tensile strength (TS), elongation at break (E), water vapor permeability (WVP), and water solubility (WS) were tested. Properties including thickness, surface smoothness, and homogeneity of films prepared with organically modified montmorillonite (O-MMT), Wamok clay (W-clay), bentonite, talc powder, and zeolite were comparable to those of control SPI films. TS increased significantly (p<0.05) in films prepared with O-MMT and bentonite, while WVP decreased significantly (p<0.05) in bentonite-added films. WS of most nanocomposite films decreased significantly (p<0.05).