• Environmental Analysis Health and Toxicology
• /
• v.31
• /
• pp.21.1-21.7
• /
• 2016

Objectives The present study analyzes metal contamination in sediment of the East Kolkata Wetlands, a Ramsar site, which is receiving a huge amount of domestic and industrial wastewater from surrounding areas. The subsequent uptake and accumulation of metals in different macrophytes are also examined in regard to their phytoremediation potential. Methods Metals like cadmium (Cd), copper (Cu), manganese (Mn), and lead (Pb) were estimated in sediment, water and different parts of the macrophytes Colocasia esculenta and Scirpus articulatus. Results The concentration of metals in sediment were, from highest to lowest, Mn ($205.0{\pm}65.5mg/kg$)>Cu ($29.9{\pm}10.2mg/kg$)>Pb ($22.7{\pm}10.3mg/kg$)>Cd ($3.7{\pm}2.2mg/kg$). The phytoaccumulation tendency of these metals showed similar trends in both native aquatic macrophyte species. The rate of accumulation of metals in roots was higher than in shoots. There were strong positive correlations (p <0.001) between soil organic carbon (OC) percentage and Mn (r =0.771), and sediment OC percentage and Pb (r=0.832). Cation exchange capacity (CEC) also showed a positive correlation (p <0.001) with Cu (r=0.721), Mn (r=0.713), and Pb (r=0.788), while correlations between sediment OC percentage and Cu (r=0.628), sediment OC percentage and Cd (r=0.559), and CEC and Cd (r=0.625) were significant at the p <0.05 level. Conclusions Bioaccumulation factor and translocation factors of these two plants revealed that S. articulatus was comparatively more efficient for phytoremediation, whereas phytostabilization potential was higher in C. esculenta.

• Membrane and Water Treatment
• /
• v.9 no.6
• /
• pp.463-471
• /
• 2018

The present paper deals with the liquid-liquid extraction and flat sheet supported liquid membrane studies of Pd(II) separation from nitric acid medium using a novel synthesized ligand, namely, N,N,N',N'-tetraethyl-2,2-thiodiethanthiodiglycolamide (TETEDGA). The effect of various diluents and stripping reagents on the extraction of Pd(II) was studied. The liquid-liquid extraction studies showed complete extraction of Pd(II) in ~ 5 min. The influence of nitric acid and TETEDGA concentration on the distribution of Pd(II) has been investigated. The increase in nitric acid concentration resulted in increase in extraction of Pd(II). Stoichiometry of the extracted species was found to be $Pd(NO_3)_2{\cdot}TETEDGA$ by slope analysis method. Extraction studies with SSCD solution showed negligible uptake of Pt, Cr, Ni, and Fe, thus showing very high selectivity and extractability of TETEDGA for Pd(II). The flat sheet supported liquid membrane studies showed quantitative transport of Pd(II), ~99%, from the feed ($3M\;HNO_3$) to the strippant (0.02 M thiourea diluted in $0.4M\;HNO_3$) using 0.01 M TETEDGA as a carrier diluted in n-dodecane. Extraction time was ~160 min. Parameters such as feed acidity, TETEDGA concentration in membrane phase, membrane porosity etc. were optimized to achieve maximum transport rate. Permeability coefficient value of $2.66{\times}10^{-3}cm/s$ was observed using TETEDGA (0.01 M) as carrier, at 3 M, $HNO_3$ feed acidity across $0.2{\mu}m$ PTFE as membrane. The membrane was found to be stable over five runs of the operation.

• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.6
• /
• pp.682-688
• /
• 2016

Food waste has recognized one of useful sources for potentially agricultural application to supply organic matter and nutrients in arable soil. However, there was little information on application of food waste compost related to the maturity and NaCl content in arable soil. This study evaluated the effect of food waste compost application on yield and fertility in soil under flooding and upland condition. The yields in rice and pepper cultivation decreased with increasing the rate of food waste compost application in soil (p<0.05). Maximum yields of rice ($49.0g\;plant^{-1}$) and pepper ($204g\;plant^{-1}$) were shown at 10 and $30Mg\;ha^{-1}$ of food waste compost application, respectively. The N, P, and K contents in grain and plant residues increased by the application of food waste compost, there was no difference on Na/K ratio in plant tissue among the treatments. Application of food waste compost resulted in the increase of pH, EC, TC, available P contents in soil after crop harvest, especially, which was shown the increase of the CEC and exchangeable sodium percentage (ESP) contents in irrespective of water condition. In conclusion, application of food waste compost in soil was effective on the supply of the organic matter and nutrient. However, it might need caution to apply food waste compost for sustainable productivity in arable soil because of potential Na accumulation.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.241-244
• /
• 2000

Continuous $H_2$ production from CO and water was studied in a trickle bed reactor(TBR) using Rhodopspedomonas palustris P4. To achieve high cell density, R. palustris P4 were cultivated by a fed-batch culture mode under chemoheterotrophic and aerobic condition, and final cell concentration was 13 g/L. TBR could provide sufficient residence time for CO to contact with cell suspension circulating TBR. The maximum CO uptake rate was found to be 16 mmol/L/hr at gas retention time of 50 min and CO partial pressure of 0.4 atm. In our correlation of the experimental data with mathematical model of TBR, the TBR operation with P4 was found to be lie in an intermediate state between mass transfer limitation and kinetic limitation. Due to the high cell density as well as hydrogen production activity in this study, TBR operation showed a superior performance to other previous reports on microbial hydrogen production.

• Polymer(Korea)
• /
• v.33 no.3
• /
• pp.248-253
• /
• 2009

Blend films based on the poly($\varepsilon$-caprolactone) (PCL) and amphiphilic biodegradable polymer, poly(ethylene glycol) grafted poly($\varepsilon$-caprolactone) (PCL-g- PEG), were prepared with different blend ratios in order to develop new biomedical material. PCL was the main component in the blend. The miscibility and characteristics of the blends were investigated. The crystallization temperature of the blend shifted to high temperatures with an increase of the graft copolymer contents when the homopolymer PCL was the main component of the blend. The PEG side chain in the blend affected the crystallization rate of the PCL crystals in the blend and alternating extinction bands were observed by optical microscopy. The protein adhesion behavior of the film was influenced by the water uptake of the film.

• Food Science and Preservation
• /
• v.5 no.4
• /
• pp.346-349
• /
• 1998

This study was investigated to changes of texture, color and chemical properties in jujube fruits which dried by sun and hot air instrument. Weight and moisture contents were the lowest in jujube fruits dried by sun thin those of others. The ratio of water uptake was the highest in jujube fruits dried by hot air drying than those of others. The hardness and rate of rotting of dried jujube fruits were the highest in sun (Dying than those of others. The browning of jujube fruits dried by sun was higher than that of jujube fruits dried by other methods. Ash content was the highest in sun dried fruits than those of others, and content of vitamin C was the lowest in nm dried fruits than those of others.

• Journal of Radiation Protection and Research
• /
• v.30 no.1
• /
• pp.45-54
• /
• 2005

A dynamic compartment model was developed to appraise the level of the contamination of agricultural plants by accidentally released tritium from nuclear facility. The model consists of a set of inter-connected compartments representing atmosphere, soil and plant. In the model three categories of plant are considered: leafy vegetables, grain plants and tuber plants, of which each is modeled separately to account for the different transport pathways of tritium. The predictive accuracy of the model was tested through the analysis of the tritium exposure experiments for rice-plants. The predicted TFWT(tissue free water tritium) concentration of the rice ear at harvest was greatly affected by the absolute humidity of air, the ratio of root uptake, and the rate of rainfall, while its OBT(organically bound tritium) concentration the stowing period of the ear, the absolute humidity of air and the content of hydrogen in the organic phase. There was a good agreement between the model prediction and the experimental results lot the OBT concentration of the ear.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.34 no.2
• /
• pp.155-162
• /
• 1989

This experiment was conducted to investigate the endosperm characteristics of an opaque rice which was derived from an Indica cultivar Pokhareli Mashino. Grain apperance of opaque rice looked similar to the waxy grain, while the blue-color response to the iodine solution was similar to non-waxy endosperm. The shape of starch granules was alike each other, but their size were different each other with the smallest of the opaque rice. Their cristaline structure of starch granules were A type. The content of total protein and most of the amino-acids of opaque rice was about 1.5 times of other varieties. Alkali digestibility of the opaque rice was very low. Total water uptake and hydration rate of opaque rice was similar to non-waxy variety Tongil. Amylogram characteristics such as viscosity, setback and consistency of opaque rice revealed medium value between. waxy and non-waxy rice.

• Textile Coloration and Finishing
• /
• v.31 no.1
• /
• pp.1-13
• /
• 2019

In this study, eco-friendly functional leather was developed by recycling wastes such as eel skin, marigold(Tagetas erecta l.), hinoki cypress(Chamaecyparis obtusa). The hot water extracts of marigold and hinoki cypress leaves were freeze-dried at $-80^{\circ}C$ to prepare colorant powder. The dyeing of eel leather with marigold was carried out to investigate the effects of dyeing conditions, mordanting on dye uptake, color, morphological change, and color fastness. Considering shrinkage of eel leather caused by dyeing, the optimum dyeing conditions were $60^{\circ}C$ of dyeing temperature and 60 min of dyeing time at 1:100 of bath ratio, and color of the dyed eel leather was Y to YR Munsell series. In order to prevent the degradation of leather from microbe, we conducted combination dyeing with marigold and hinoki cypress leave colorants. In this case, the combination dyed eel leathers showed excellent antimicrobial activity with above 99% bacterial reduction rate against S. aurieus and K. pneumoniae. It was confirmed that all of the dyed eel leathers were sufficient to meet the Korean Standard for color fastness of leather products. It can be applied practically for the development of eco-friendly functional leather by utilizing some useful active components extracted from plant resources and by recycling food wastes.

• Advances in nano research
• /
• v.10 no.1
• /
• pp.77-90
• /
• 2021

In the present study, novel chitosan coated magnetic magnetite (Fe3O4) nanoparticles were successfully biosynthesized from mushroom, Agaricus campestris, extract. The obtained bio-nanocomposite material was used to investigate ultra-fast and highly efficient for removal of Ni2+ ions in a fixed-bed column. Chitosan was treated as polyelectrolyte complex with Fe3O4 nanoparticles and a Fungal Bio-Nanocomposite Material (FBNM) was derived. The FBNM was characterized by using X-Ray Diffractometer (XRD), Scanning Electron Microscopy-Energy Dispersive X-Ray Spectroscopy (SEM-EDS), Fourier Transform Infrared spectra (FTIR) and Thermogravimetric Analysis (TGA) techniques and under varied experimental conditions. The influence of some important operating conditions including pH, flow rate and initial Ni2+ concentration on the uptake of Ni2+ solution was also optimized using a synthetic water sample. A Central Composite Design (CCD) combined with Response Surface Modeling (RSM) was carried out to maximize Ni2+ removal using FBNM for adsorption process. A regression model was derived using CCD to predict the responses and analysis of variance (ANOVA) and lack of fit test was used to check model adequacy. It was observed that the quadratic model, which was controlled and proposed, was originated from experimental design data. The FBNM maximum adsorption capacity was determined as 59.8 mg g-1. Finally, developed method was applied to soft drinks to determine Ni2+ levels. Reusability of FBNM was tested, and the adsorption and desorption capacities were not affected after eight cycles. The paper suggests that the FBNM is a promising recyclable nanoadsorbent for the removal of Ni2+ from various soft drinks.