• 대한기계학회논문집A
• /
• 제38권6호
• /
• pp.637-647
• /
• 2014

국내 가압경수로형 원자로의 압력용기 상부헤드에는 많은 제어봉구동장치(CRDM) 노즐이 분포한다. 이들 노즐은 억지끼워맞춤(Shrink fitting) 방식으로 결합되어 용접 처리 된다. 용접에 의해 발생되는 인장잔류응력은 일차수응력부식균열을 발생시키는 주요 요인이다. 이러한 이유로 최근 15 여 년 동안 관통노즐 용접부 부위에서 균열 발생 사례가 증가하고 있으며, 이를 극복하기 위해 다양한 방안이 모색되고 있다. 또한 용접과정에서 발생되는 불필요한 결함은 일차수응력부식균열(PWSCC)을 가속화 시키는 원인이 되기도 한다. 원자로 제작과정에서 용접에 의한 결함은 보수용접에 의해 즉시 수리가 이루어 진다. 기존의 연구에서는 정상적인 용접과정에서 발생되는 잔류응력을 예측하였으나, 본 연구에서는 용접과정에서 발생되는 결함을 보수하기 위해 실시되는 보수용접이 용접잔류응력에 미치는 영향을 분석하였다.

• Membrane and Water Treatment
• /
• 제9권1호
• /
• pp.43-51
• /
• 2018

Hollow fiber (HF) membranes are gaining wide interest over flat membranes due to their compaction and high area to surface volume ratio. This work addresses the fabrication of HF from polysulfone (PS) and polyethersulfone (PES) using N-methylpyrrolidone (NMP) as solvent in addition to other additives to achieve desired characteristics. The semi-pilot spinning system includes jacketed vessel, four spinneret block, coagulation and washing baths in addition to dryer and winder. Different parameters affecting dry-wet spinning phase inversion process were investigated. Dope compositions of PES, NMP and polyvinyl pyrrolidone (PVP) of varying molecular weights as additive were addressed. Some critical parameters of importance were also investigated. Those include dope flow rate, air gap, coagulation & washing baths and drying temperatures. The measured dope viscosity was in the range from 1.7 to 36.5 Pa.s. Air gap distance was adjusted from 20 to 45 cm and coagulation bath temperature from 20 to $46^{\circ}C$. The HF membranes were characterized by scanning electron microscope (SEM), atomic force microscope (AFM) and mechanical properties. Results indicated prevalence of finger like structure and average surface roughness from about 29 to 78.3 nm. Profile of stress strain characteristics revealed suitability of the fibers for downstream interventions for fabrication of thin film composite membrane. Different empirical correlations were formulated which enable deeper understanding of the interaction of the above mentioned variables. Data of pure water permeability (PWP) confirmed that the fabricated samples fall within the microfiltration (MF)-ultrafiltration (UF) range of membrane separation.

• 한국지반공학회논문집
• /
• 제28권5호
• /
• pp.85-94
• /
• 2012

최근 동결지반의 다양한 문제들에 대한 관심이 증대하면서 동결의 영향을 받는 지반의 거동특성에 관한 이론정립 및 체계적인 연구의 필요성이 제기되고 있다. 기존의 정립된 토질역학 이론과는 달리 동결지반에서 온도의 영향과 간극수의 동결에 의한 상변화는 간극수의 이동, 지반팽창, 작용토압의 급격한 증가 등 여러가지 문제들을 야기한다. 본 논문에서는 비동결-동결 전이 상태에서 연속성을 갖는 새로운 응력변수를 도입하여, 동결 작용을 받는 다공질 재료에 대한 THM 역학적 탄소성 구성모델을 유도하였다. 개발된 구성모델을 1차원 팽창압, 동결토의 삼축압축 강도 그리고 일방향 동결실험에 적용하여 해의 안정성과 구성모델의 적용성에 대하여 논의하였다. 수치해석 결과는 동결토의 복잡한 THM현상들을 효과적으로 묘사할 수 있었으며, 동결의 영향하에 있는 지반구조물의 해석과 설계 및 시공될 구조물의 장기거동예측에 활용될 수 있을 것이다.

• 대한기계학회논문집A
• /
• 제27권3호
• /
• pp.432-439
• /
• 2003

Inconel 690 for nuclear steam generator tube has more Chromium than the conventionally used Inconel 600 in order to increase the corrosion resistance. To evaluate the tribological characteristics of Inconel 690 under fretting condition the fretting tests were carried out in air and elevated temperature water. Fretting tests of the cross-cylinder type were done under various vibrating amplitudes and applied normal loads in order to measure the friction forces and wear volumes. From the results of fretting wear tests. the wear of Inconel 690 can be predictable using the work rate model. The amounts of friction forces were proportional to relative movement between two fretting surfaces. The friction coefficients were decreased as increasing the normal loads and deceasing the vibrating amplitudes. Depending on fretting environment, distinctively different wear mechanisms and often drastically different wear rates can occur It was found that the fretting wearfactors in air and water at 2$0^{\circ}C$, 5$0^{\circ}C$, and 8$0^{\circ}C$ were 7.38 $\times$ $10^{-13}$$Pa^{-1}$, 2.12 $\times$$10^{-13}$$Pa^{-1}$, 3.34$\times$$10^{-13}$$Pa^{-1}$and 5.21$\times$$10^{-13}$$Pa^{-1}$, respectively flexibility to model response data with multiple local extreme. In this study, metamodeling techniques are adopted to carry out the shape optimization of a funnel of Cathode Ray Tube, which finds the shape minimizing the local maximum principal stress. Optimum designs using two metamodels are compared and proper metamodel is recommended based on this research.

• 비파괴검사학회지
• /
• 제33권1호
• /
• pp.26-33
• /
• 2013

원자로 BMI 노즐은 원자력발전 설비의 운영을 위한 핵심요소 중 하나이며 하부헤드에 설치되어 있다. 상부헤드에 비해 비교적 저온영역에 있지만 최근 외국사례에 비추어 볼 때 PWSCC의 발생 가능성이 크기 때문에 가동중 비파괴검사가 반드시 필요하다. 그러나 BMI 노즐은 원자로 하부에 있기 때문에 고방사선 구역이며 원자로 내부는 붕산수로 채워져 있기 때문에 접근이 매우 어렵다. 본 연구에서 BMI 노즐 검사를 위하여 TOFD를 이용한 탐촉자를 개발하였고, 자동화검사를 위해 내방수 기능을 가진 스캐너를 개발하였다. 또한, BMI 노즐과 동일한 재질 및 형상으로 인공결함시험편을 제작하여 자동화 비파괴검사 시스템의 성능검증을 수행하였다.

• 한국물환경학회지
• /
• 제31권3호
• /
• pp.235-240
• /
• 2015

To evaluate the unit load generation and discharge, pig cage test was conducted. Feed intake, drink amount, and urine generation increased growth stage (heavy weight) of the pig more great. However, the sum of the urine and manure did not show a significant difference in the growth stages of pigs. Because of the limit of the experiment, e.g., research period, high pigpen temperature, breed-related stress and etc., it could not be derived the results of the four seasons. Therefore, in order to generalize the results, the feed intakes were calibrated using a NRC (National Research and nutritional requirements of pigs from the Commission) standards. The finalized unit load generation and generation amounts of manure and urine were estimated at BOD 104.1 g/head/d, T-N 21.2 g/head/d, T-P 4.9 g/head/d, manure 0.96 L/d, urine 1.66 L/d with consideration of revised feed intake. Compare to the former research results of MOE (Ministry of Environment, 1999) and NIAS (National Institute of Animal Science, 2008), the generation amounts of manure and urine were similar to the NIAS's values. In case of unit load generation, BOD and T-N were almost similar in all of them. However, the T-P unit load generation of MOE was more difference, e.g., 2.5 times high, compare to this study.

• Fisheries and Aquatic Sciences
• /
• 제23권4호
• /
• pp.10.1-10.10
• /
• 2020

Background: Butaphosphan (BTP) has recently been introduced into the Korean aquaculture sector as a stressattenuating agent. In this study, a sensitive chemical analytical method was established for the detection of BTP in the olive flounder (Paralichthys olivaceus) tissues. Methods: Utilizing a method employing liquid chromatography coupled with tandem mass spectrometry (LC-MS/MS), detection sensitivity, specificity, and precision were satisfactorily established. Temporal changes in the BTP plasma and muscle concentrations were assessed after a single intramuscular injection of BTP (50 and 150 mg/kg) to the olive flounder maintained at 13 ℃ or 22 ℃. Results: High BTP plasma levels were achieved immediately after the injection, and the drug was rapidly eliminated. Additionally, plasma BTP levels were markedly dependent on the elimination rate, which, in turn, seemed dependent on the water temperature, with the drug elimination half-life and mean residence time significantly shorter at 22 ℃ than 13 ℃. Overall, muscle BTP levels were markedly lower than the plasma levels. Notably, muscle levels were not influenced by water temperatures. Muscle BTP concentrations were used to estimate the necessary withdrawal period for drugs used in food fish, with BTP levels maintained far below the possible hazardous limit. Conclusions: In conclusion, the established LC-MS/MS method can be used for BTP residue detection with high sensitivity and reproducibility.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.231-234
• /
• 2010

고온의 연소가스에 노출되는 디퓨저 냉각에 필요한 열량을 계산하였다. 디퓨저 내부는 공기와 혼합된 연소가스가 흐르고 디퓨저 벽체는 채널로 구성된 공간에 물이 흐르도록 되어 있다. 디퓨저 구조물과 유체 간에 또는 유체 자체적인 열전달과 구조물 내부의 열전달 현상은 복합적인 형태로 나타나는데 고온에서 작동하는 점을 고려하여 복사, 대류, 전도 모두를 적용 하였다. 열전달량 계산은 경험식에 근거한 1차원 해석과 CFD 해석의 2가지 방법으로 수행하였다. 1차원 해석은 경험식을 통해 얻어진 결과를 적용하여 열전달량을 산출하였고, CFD 해석은 DO 복사 열전달 모델을 적용하여 계산하였으며, 계산의 타당성을 검정하기 위하여 두 방법을 비교하였다. 총 열전달량의 차이는 1% 미만으로 거의 같았으나, 1차원 계산은 열전달 모델의 단순화로 디퓨저 입구에서의 순환영역을 구현하지 못하여 전체적인 열전달량 분포에서는 차이를 보였다. 디퓨저의 안정성을 확보하기 위한 냉각수 용량은 2가지 계산 결과를 조합하여 각 구간별로 최대 열전달량을 근거로 도출하였다.

• 한국환경과학회지
• /
• 제28권3호
• /
• pp.321-328
• /
• 2019

This study aimed to analyze the growth and physical responsees of Dracaena braunii in response salt accumulation in ornamental water culture and to examine the effect of activated carbon on this growth response. The experiment was conducted in a plant growth chamber and the indoor environmental conditions of the chamber were set at $23{\pm}1^{\circ}C$ temperature, $70{\pm}3%$ humidity, and 1,000 lux brightness. The observation of the growth response of plants in the presence of activated carbon showed that the pH with activated carbon maintained sub-acidic to neutral (6.27~7.32) conditions and showed decreased electric conductivity in the media. As the treatment with added activated carbon showed good growth and physical responses, this indicated that absorption effect of activated carbon had a positive influence on the growth of plants. However, as the absorption effect of activated carbon may decrease over time and the use of high concentrations of activated carbon might cause nutrition shortage, various concentration of activated carbon and their absorption effects need to be investigated in the future.

• 천문학회보
• /
• 제44권1호
• /
• pp.70.4-70.4
• /
• 2019

Complex organic molecules (COMs) are increasingly observed in the environs of young stellar objects (YSOs), including hot cores/corinos around high-mass/low-mass protostars and protoplanetary disks. It is widely believed that COMs are first formed in the ice mantle of dust grains and subsequently released to the gas by thermal sublimation at high temperatures (T>100 K) in strong stellar radiation fields. In this paper, we report a new mechanism that can desorb COMs from icy grain mantles at low temperatures (T<100K), which is termed rotational desorption. The rotational desorption process of COMs comprises two stages: (1) ice mantles on suprathermally rotating grains spun-up by radiative torques (RATs) are first disrupted into small fragments by centrifugal stress, and (2) COMs and water ice then evaporate rapidly from the tiny fragments (i.e., radius a <1nm) due to thermal spikes or enhanced thermal sublimation due to increased grain temperature for larger fragments (a>1 nm). We discuss the implications of rotational desorption for releasing COMs and water ice in the inner region of protostellar envelopes (hot cores and corinos), photodissociation regions, and protoplanetary disks (PPDs). In shocked regions of stellar outflows, we find that nanoparticles can be spun-up to suprathermal rotation due to supersonic drift of neutral gas, such that centrifugal force can be sufficient to directly eject some molecules from the grain surface, provided that nanoparticles are made of strong material. Finally, we find that large aggregates (a~ 1-100 micron) exposed to strong stellar radiations can be disrupted into individual icy grains via RAdiative Torque Disruption (RATD) mechanism, which is followed by rotational desorption of ice mantles and evaporation of COMs. In the RATD picture, we expect some correlation between the enhancement of COMs and the depletion of large dust grains in not very dense regions of YSOs.