• Geomechanics and Engineering
• /
• 제24권6호
• /
• pp.531-543
• /
• 2021

Freezing and thawing of pore water within backfill can affect the stability of retaining wall as the phase change of pore water causes changes in the mechanical characteristics of backfill material. In this study, the effects of freezing and thawing on the mechanical performance of retaining wall with granular backfill were investigated for various temperature and groundwater level (GWL) conditions. The thermal and mechanical finite element analyses were performed by assigning the coefficient of lateral earth pressure according to phase change of soil for at-rest, active and passive stress states. For the at-rest condition, the mobilized lateral stress and overturning moment changed markedly during freezing and thawing. Active-state displacements for the thawed condition were larger than for the unfrozen condition whereas the effect of freezing and thawing was small for the passive condition. GWL affected significantly the lateral force and overturning moment (Mo) acting on the wall during freezing and thawing, indicating that the reduction of safety margin and wall collapse due to freezing and thawing can occur in sudden, unexpected patterns. The beneficial effect of an insulation layer between the retaining wall and the backfill in reducing the heat conduction from the wall face was also investigated and presented.

• Corrosion Science and Technology
• /
• 제5권3호
• /
• pp.85-89
• /
• 2006

KAERI(Korea Atomic Energy Research Institute) has developed a repassivation rate test system which can be operated at $300^{\circ}C$. It consists of an autoclave, three electrodes for an electrochemical test and a diamond scratch tip. All the electrodes are electrically insulated from the autoclave by using high temperature fittings. Reproducible repassivation curves of alloy 600 at 300 C were obtained. Repassivation rate of alloy 600 at pH 13 was slower than that of pH 10. Stress corrosion cracking test was carried as a function of the pH at a high temperature. At pH 10, alloy 600 showed a severe stress corrosion cracking(SCC), whereas it did not show a SCC at pH 7. From the viewpoint of a relationship between the current density and the charge density, a big difference was observed in the two solutions; the slope of pH 13 was steeper than that of pH 10. So the stress corrosion susceptibility at pH 13 seems to be higher than that of pH 10. The system would be a good tool to evaluate the SCC susceptibility of alloy 600 at a high temperature.

• Food Science and Biotechnology
• /
• 제18권2호
• /
• pp.299-306
• /
• 2009

The purpose of this study was to prepare stable water-in-corn oil (W/O) emulsion droplets coated by polyglycerol polyricinoleate (PGPR). W/O emulsions (20 wt% aqueous phase, 80 wt% oil phase containing 8 wt% PGPR) were produced by high pressure homogenization (Emulsions 1), however, appreciable amount of relatively large water droplets (d>$10{\mu}m$) were found. To facilitate droplet disruption, viscosity of each phase was adjusted: (i) increased the viscosity of aqueous phase by adding 0.1 wt% xanthan (Emulsions 2); (ii) decreased the viscosity of oil phase and aqueous phase by heating them separately at $50^{\circ}C$ for 1 hr immediately before emulsification (Emulsions 3). Homogenizing at the elevated temperature clearly led to a smaller water droplet size, whereas xanthan neither improved nor adversely affected on the microstructures of the emulsions. In addition, the Emulsions 3 had good stability to droplet aggregation under shearing stress, thermal processing, and long term storage.

• 한국해양생명과학회지
• /
• 제2권2호
• /
• pp.70-74
• /
• 2017

IL-1RAcP는 일명 interleukin-1 receptor accessory protein이라 칭하며 interleukin-1 염증성 사이토카인과 interleukin-1 receptor I (IL-1RI) 결합체와 복합체를 형성하여 작용한다. IL-1RAcP는 면역반응, 스트레스 및 세포사멸과 관련이 있다. 본 연구의 목적은 참돔(Pagrus major)을 저수온(8℃, 33 psu) 및 저염분(20℃, 10 psu) 상태에 노출시킨 후, IL-1RAcP 유전자의 발현을 관찰하는 것이다. 연구결과, IL-1RAcP 유전자의 발현은 저수온(8℃, 33 psu) 및 저염분(20℃, 10 psu) 상태에서 유의적으로 증가하는 것으로 나타났다. 이 연구결과로서 IL-1RAcP 유전자는 저수온 및 저염분 등의 환경 스트레스에 대한 생체지표유전자로서 역할을 한다고 제의한다.

• 한국발생생물학회지:발생과생식
• /
• 제20권3호
• /
• pp.255-266
• /
• 2016

The optimum concentrations of clove oil as an anesthetic for olive flounder (Paralichthys olivaceus) and the stress response of the fish to clove oil anesthesia were determined over a range of water temperatures, and investigated in a simulated transport experiment using analysis of various water and physiological parameters. While the time for induction of anesthesia decreased significantly as both the concentration of clove oil and water temperature increased, the recovery time increased significantly (P<0.05). The plasma cortisol concentration in fish at each temperature increased significantly up to 12 h following exposure (P<0.05), then decreased to 48 h (P<0.05). The DO dissolved oxygen concentrations, pH values, and the fish respiratory frequencies decreased over 6 h following exposure to clove oil in all experimental groups (P<0.05), whereas the $NH_4{^+}$ and $CO_2$ concentrations in all experimental groups increased up to 6 h (P<0.05). The pH values and DO concentrations increased with increasing clove oil concentration (P<0.05) in the 6 h following exposure, and the $CO_2$ and $NH_4{^+}$ concentrations and the respiratory frequencies decreased with increasing clove oil concentration (P<0.05). The results of this experiment suggest that clove oil reduced the metabolic activity of olive flounder, thus reducing $NH_4{^+}$ excretion and $O_2$ consumption. In conclusion, clove oil appears to be a cost-effective and efficient anesthetic that is safe for use and non-toxic to the fish and users. Its use provides the potential for improved transportation of olive flounder.

• Corrosion Science and Technology
• /
• 제2권4호
• /
• pp.178-182
• /
• 2003

Slow Strain Rate Tests (SSRT) were carried out to investigate the effect of environmental factors on the Stress Corrosion Cracking (SCC) susceptibility of 3.5NiCrMoV steels used in discs for Low-Pressure (LP) steam turbines in electric power generating plants. The influences of dissolved oxygen on the stress corrosion cracking of turbine steel were studied, For this purpose, specimens were strained at variously oxygenated conditions at $150^{\circ}C$ in pure water. When the specimen was strained with $1{\times}10^{-7}s^{-1}$ at $150^{\circ}C$ in pure water, increasing concentration of dissolved oxygen decreased the elongation and the UTS. The corrosion potential and the corrosion rare increased as the amounts of dissolved oxygen increased. The increase of the SCC susceptibility of the turbine steel in a highly dissolved oxygen environment is due to the non protectiveness of the oxide layer on the turbine steel surface and the increase of the corrosion current. These results clearly indicate that oxygen concentration increases Stress Corrosion Cracking susceptibility in turbine steel at $150^{\circ}C$.

• 대한한방체열의학회지
• /
• 제6권1호
• /
• pp.69-75
• /
• 2008

Purpose: We investigated the effect of far-infrared radiating products on cold hypersensitivity of lower limbs using CST. Methods: 7 patients with cold hypersensitivity of lower limbs were investigated in this study. Exclusive criteria was skin diseases, spinal nervous disease and external wounds. They were asked to answer the VAS of cold hypersensitivity at baseline and after 3 weeks. We measured temperature of lower limbs with Spectrum 9000 MB (Dorex Inc, USA). We performed cold stress test (CST) by 3 thermographic observation using DITI : 1st was taken after 15 minutes resting at $25^{\circ}C$, the 2nd was immediately taken after 1 minute soak in $20^{\circ}C$ water, the 3rd was taken at 15 minutes after soak. We performed 3 times of CST : 1st CST was perfomed at baseline, 2nd CST was perfomred after 1 week and just observation, 3rd CST was performed after 1 week using far-infrared radiating products (lasner, UMT, Korea). Results: After using products, temperature of foot incresed more than thigh area, but there was no significance. There was no statistical difference of VAS, change of temperature and CST between before and after using far-infrared radiating products. Conclusion: There was no statistical effect of far-infrared radiating products on change of temperature of lower limbs.

• Nuclear Engineering and Technology
• /
• 제51권2호
• /
• pp.510-517
• /
• 2019

Increasing proliferation resistance of plutonium by way of increased $^{238}Pu$ content is of interest to the nuclear nonproliferation and international safeguards community. Considering the high alpha decay heat of $^{238}Pu$, increasing the isotopic fraction leads to a noticeably higher amount of heat generation within the plutonium. High heat generation is especially unattractive in the scenario of weaponization. Upon weaponization of the plutonium, the plutonium may generate enough heat to elevate the temperature in the high explosives to above its self-explosion temperature, rendering the weapon useless. In addition, elevated temperatures will cause thermal expansion in the components of a nuclear explosive device that may produce thermal stresses high enough to produce failure in the materials, reducing the effectiveness of the weapon. Understanding the technical limit of $^{238}Pu$ required to reduce the possibility of weaponization is key to reducing the current limit on safeguarded plutonium (greater than 80 at. % $^{238}Pu$). The plutonium vector evaluated in this study was found by simulating public information on Lightbridge's fuel design for pressurized water reactors. This study explores the temperature profile and maximum stress within a simple (first generation design) hypothetical nuclear explosive device of four unique scenarios over time. Analyzing the transient development of both the temperature profile and maximum stress not only establishes a technical limit on the $^{238}Pu$ content, but also establishes a time limit for which each scenario would be useable.

• 한국작물학회지
• /
• 제35권4호
• /
• pp.362-369
• /
• 1990

염해의 기작을 구명코저 몇가지 작물을 공시하여 해수처리가 광합성, 근호흡 및 증발산에 미치는 영향에 관하여 추구한 결과를 요약하면 다음과 같다. 1. 온도차이에 따른 상대증발산량과 상대광합성량은 처리후 4일간의 일변화에서 그 반응이 상이하였으나 공시작물 4종 모두 저온구(11-16$^{\circ}C$)에서 고온구(22-24$^{\circ}C$)보다 높았다. 2. 상대증발산량과 근호흡량의 상관에서는 orchard grass는 r=0.996$^{**}$ , alfalfa는 r=0.828$^{*}$ , white clover에서는 r=0.996$^{**}$ 을 나타냈으나 tall fescue에서는 상관관계를 인정할 수 없는 상이한 결과를 나타냈다. 3. OED(증산억제제) 처리에 따르는 증발산량과 근호흡량은 전공시 작물이 해수처리구가 수도수처리구보다 근호흡 및 증발산량을 감소시켰으며, OED 처리구가 무처리구보다 zeolite구가 모래구 보다 적었다. 4. 해수처리에 다른 근부의 피해상태는 orchard grass 및 tall fescue에서는 근부의 피층이 갈변하였고 alfalfa와 white clover에서는 피층부분이 수분침수에 의해 변색되었다.

• 한국압력기기공학회 논문집
• /
• 제8권1호
• /
• pp.8-18
• /
• 2012

In early constructed nuclear power plants, Ni-based Alloys 82/182 had been widely used for dissimilar metal welds (DMW) as a weld filler metal. However, Alloys 82/182 have been proven to be susceptible to primary water stress corrosion cracking (PWSCC) in the nuclear primary water environment. The formation of crack due to PWSCC is also influenced by weld residual stresses. Thus, the accurate estimation of weld residual stresses of DMW is crucial to investigate the possibility of PWSCC and instability behaviors of crack due to PWSCC. In this context, the present paper investigates weld residual stresses of nuclear reactor piping nozzles based on 2-D axi-symmetric finite element analyses based on layer-based approach using maximum molten bead temperature. In particular, the effect of analysis parameters, i.e., a thickness of weld layer, an initial molten bead temperature, convection heat transfer coefficient, and geometric constraints on predicted weld residual stresses was investigated.