• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.12
• /
• pp.1649-1655
• /
• 2009

The antioxidant activities of water extracts from wild vegetables such as Ligularia fischeri (GC), Capsicum annuum L. (GCY), Aster scaber (CNM), Petasites japonicus S. et Z. Max (MYD), Ipomoea batatas L. (Lam) (GGM) were evaluated and compared with water extracts from freeze dried block. The antioxidant properties of water extracts from wild vegetables and their freeze dried block were evaluated using different antioxidant tests; 2.2-diphenyl-1-picryl-hydrazyl (DPPH) radical scavenging, hydroxyl radical scavenging and nitrite scavenging activities. The water extracts from wild vegetables were found to have a higher total phenolic content than water extracts from freeze dried block. Total phenolic contents of water extracts from GC, GCY, CNM, MYD, and GGM were $471.66{\pm}3.52\;{\mu}g/mg,\;141.33{\pm}2.51\;{\mu}g/mg,\;177.33{\pm}2.88\;{\mu}g/mg,\;238.66{\pm}9.50\;{\mu}g/mg\;and\;122.67{\pm}3.51\;{\mu}g/mg$, respectively. At the concentrations of 1000 ppm, water extracts from GC, GCY, CNM, and GGM showed higher activities than water extracts from their freeze dried block on DPPH radical scavenger activity. The activity of water extracts from CNM, GC, GCY, MYD, and GGM were 90.9%, 89.9%, 76.6%, 71.1%, and 57.4%, respectively. When 10000 ppm of GC, GCY, CNM, MYD, and GGM water extracts tested for hydroxyl radical scavenging activity, activities were increased by 38.8%, 33.4%, 35.9%, 34.3%, and 33.8%, respectively and a similar effect was found with water extracts from GCY, CNM, and GGM freeze dried block at 10000 ppm concentration. However, the water extracts from GC and MYD was slightly more effective than freeze dried block extracts. The water extracts from wild vegetables and their freeze dried block had effective DPPH radical scavenger activity and hydroxyl radical scavenging activity at all tested concentrations. Nitrite scavenging activity of GC water extract significantly increased in a dose-dependent manner and the extract had higher nitrite scavenging activity than extracts freeze dried block extracts. We found that freeze dried block maintained antioxidant activities of the wild vegetables.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.32 no.3
• /
• pp.56-66
• /
• 1990

To investigate the status of irrigation water use and the degree of repeated use of irrigation water, observations for water balance analysis were made during the irrigation periods in 1986 and 1987 crop year. The total area of studied site is 1,441 ha. The site is a major portion of Jedaecheon basin which is located in Bubuk-myeon, Miryang-gun, Gyeongnam Province. The studied area was subdivided into six small blocks. The water balance analysis for these subdivided blocks were carried out considering characteristics of each block. Obtained results are as follow: 1.In mountainous sloppy paddy area(less than 7% slope), the surface inflow was 5A mm/day in average that is one third of the surface inflow into plain paddy area ; 16.7 mm/day. 2.The surface inflows at the vegetative stage and the ripening stage were 15.5 mm/day and 10.4 mm/day, respectively. Those figures were larger than the actual consumptive use at respective same stages ; 13.3 mm/day and 9.2 mm/day, respectively. Whereas, the surface inflow at generative stage was 12.5 mm/day which was less than 14.0 mm/day ; the actual consumptive use. 3.The range of the variation of water storage term was 1 mm/day. This means that there were no change in depth of ponded water on paddy fields. The relationship between the variation of water storage(AS) and the variation of ground water table(H) could be expressed as follow: : AS=0.14H+0.26 4.The ground water inflow: into the transition region ; paddy fields which are located continuously from the mountainous area to the plain area, was larger than the out flow from this region, in general. Rowever, in the plain region where the ground water utilization was predominant, the ground water outflow from this region was larger than inflow: to this region. The relationship between the ground water flow(G2- G1) and the consumptive use in large paddy area(D1-D2) could be expressed as follow: (G2-G1) =0.95(D1-D2) -3.79

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.9
• /
• pp.1294-1299
• /
• 2002

The study aimed to evaluate the influence of molasses in ensiling cassava and Gliricidia tops, common crop residues in the farming systems of Vietnam. Four levels of sugarcane molasses: 0, 30, 60 and 90 kg per tonne of fresh material, and two storage periods (2 and 4 months) for each of the two plant species: Cassava (Manihot esculenta, Crantz) and Gliricidia (Gliricidia sepium, Jacq.) were allocated in a 4${\times}$2 factorial completely randomized block design with 3 replicates. A total of 48 plastic bags, each one containing 10 kg herbage were used. Based on the colour, smell and mold appearance, all the silages were considered to be acceptable but with more spoiled silages with higher levels of additives. DM of herbages (25.8% and 22.4% in cassava and Gliricidia tops, respectively) were not changed during ensiling and the molasses additive had no significant effect on the silage DM. Contents of CP and NDF in the cassava tops silage decreased significantly with increased level of molasses and storage period, respectively. The mean pH values of non-molasses silages were 4.39 in cassava tops and 4.60 in Gliricidia tops. Increased additive levels significantly reduced silage pH in Gliricidia (p<0.01) but not in cassava tops silage (p=0.10). Longer storage period significantly reduced pH in both silages. The water soluble carbohydrate (WSC) concentrations of cassava tops and Gliricidia tops were reduced by 90 and 80%, respectively, after ensiling. Molasses addition increased significantly the silage WSC concentrations. HCN contents in the fresh cassava and Gliricidia tops were reduced by 68 and 43%, respectively, after 2 months ensiling, and were continuously reduced during storage. A reduction of 25% and 42% in the tannin content of fresh cassava and Gliricidia tops, respectively was found after ensiling. Storage time and molasses additive had little affect on the tannin content. Silage lactic acid concentrations were around 1,0% of DM in cassava and 1.7% of DM in Gliricidia top silages, and no effect of molasses additive and storage time was found. It is concluded that cassava and Gliricidia tops residues can be preserved successfully by ensiling, and only low levels of molasses additive are needed to improve silage fermentation.

• Applied Chemistry for Engineering
• /
• v.21 no.5
• /
• pp.570-574
• /
• 2010

The main function of conventional insulation materials is only to block the heat transfer and reduce heat loss from the building. On the other hand, thermal storage materials can work as an energy saver by absorbing or emitting heat within a specific temperature range. Thermal storage materials for building can maintain a constant temperature by effectively regulating the cycle of indoor temperature. As a result, we can enhance the performance of a cooling and heating system efficiently. In this study, phase change materials (PCMs) were added as thermal storage materials into gypsum boards which are extensively used for building material and we found out the thermal environmental characteristics. In addition, we checked out some problems when applying the thermal storage materials to buildings. Finally, This study set out to examine the degree of environmental-friendly characteristics of thermal storage building materials by analyzing the amount of TVOC and HCHO contents with the possibility of pollutants emission.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.03b
• /
• pp.639-646
• /
• 2000

It is important to estimate the mechanical properties of clay since it is directly related to the design and the construction of geotechnical structures. Site exploration, which is composed of boring, sampling, in-situ, or laboratory tests, is preformed to estimate the mechanical properties. However, mechanical properties of clay measured from laboratory test may be different from in-situ properties due to disturbances occurred during sampling, transportation, storage, and trimming. In this study, the degree of disturbance according to sampling method was estimated with the test results of CK/sub o/U triaxial compression test on Yangsan clay. The soil samples were obtained by three types of sampling method, j.e., 76mm-tube sampler, 76mm-piston sampler, and block sampler. In order to evaluate the quality of samples, volumetric strain, undrained shear strength, secant Young's modulus, and pore pressure coefficient at peak measured from each sample were compared with one another. From the test results, it was observed that mechanical properties of the block and piston samples were more reliable than those of tube samples. But it was observed that the water content of piston was similar to that of tube samples at given depths while the water content of block samples was 14.3∼15.8% smaller than that of piston and tube samples. In addition to the evaluation of the quality of samples, relationship between c/sub u// σ/sub vc/'and OCR was established from the results of the CK/sub o/U triaxial compression tests, which were carried out using SHANSEP method. And also undrained shear strength was analyzed using the in-situ test data such as Cone Penetration Test(CPT), Dilatometer Test(DMT), and Field Vane Test(FVT) and was compared with that evaluated from CK/sub o/U triaxial compression test.

• Journal of Communications and Networks
• /
• v.18 no.6
• /
• pp.902-912
• /
• 2016

Recent advances in energy harvesting (EH) technology have motivated the adoption of rechargeable mobile devices for communications. In this paper, we consider a point-to-point (P2P) wireless communication system in which an EH transmitter with a non-ideal rechargeable battery is required to send a given fixed number of bits to the receiver before they expire according to a preset delay constraint. Due to the possible energy loss in the storage process, the harvest-use-and-store (HUS) architecture is adopted. We characterize the properties of the optimal solutions, for additive white Gaussian channels (AWGNs) and then block-fading channels, that maximize the energy efficiency (i.e., battery residual) subject to a given rate requirement. Interestingly, it is shown that the optimal solution has a water-filling interpretation with double thresholds and that both thresholds are monotonic. Based on this, we investigate the optimal double-threshold based allocation policy and devise an algorithm to achieve the solution. Numerical results are provided to validate the theoretical analysis and to compare the optimal solutions with existing schemes.

• Journal of Korean Society on Water Environment
• /
• v.16 no.4
• /
• pp.469-477
• /
• 2000

Bisphenol-A (BPA), a known endocrine disruptor, is a main building block of epoxy resin which is widely used as a coating agent in residential water storage tanks. Therefore, BPA leaching from the epoxy resin may have adverse effects on human health. The possibility of BPA leaching from three epoxy resins were tested with a modified KS D 8502 method at 20, 50, 75 and $100^{\circ}C$ in deionized water and the specified test water, respectively. BPA leached to the test water was identified using GC-MS and quantified with GC-FID after a sequential extraction and concentration. The results showed that BPA leaching has occurred in all three samples tested. The quantify of BPA leaching from unit area of epoxy resin coating was in the range of $10.677{\sim}273.120{\mu}g/m^2$ for sample A, 29.737~1734.045 for sample B and 52.857~548.778 for sample C depending on the test temperature, respectively. In general, the amount of BPA leaching increased as the water temperature increases. This result implies a higher risk of BPA leaching to drinking water during a hot summer season. In addition, microbial growth, measured by colony forming units, in epoxy coated water tanks was higher than that in a stainless steel tank suggesting that compounds leaching from epoxy resin may support the growth of microorganisms in a residential water holding tank.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.228-228
• /
• 2018

강변여과는 지하수 인공함양 방식 중 유도함양(induced recharge) 또는 간접함양 방식에 속한다. 이는 하천 및 강변 부근에 집수시설을 설치한 후, 미고결층 대수층(unconsolidated aquifer)의 자연 오염 저감능을 이용하여 지표수를 간접 취수하는 방식으로 수질이 불량한 지표수가 대수층을 관류하면서 희석, 화학적 이온 교환 및 반응, 흡착, 생물막(biofilm; 미생물에 의한 자연저감), 여과 등을 통하여 수질이 개선된다. 강변여과수내의 용존 농도가 높은 철과 망간은 수처리 비용증가, 용수관정 및 시설물의 수명단축을 초래한다. 따라서 강변여과 지역의 미고결 대수층에서 효과적인 철과 망간 동시 제거(vyredox)를 위해 에어서징(air surging)과 블록 서징(block surging)을 실시하기 위해서 실내 물탱크 모델(water tank model)에서 에어서징에 따른 공기 순환 우물시스템을 관찰하였으며, 이를 바탕으로 현장시험(Test bed)에 적용하였다. 미고결 대층수층에서의 철 망간은 음용수 기준치(각각 0.3 mg/L)를 초과하고 있으며, 강변여과 취수 개발 및 이용을 제한하는 요인이 되고 있다. 본 연구에서 사용된 에어서징과 블록서지 기술은 자갈층 및 미고결 대수층에 충진된 슬라임 및 폐색(clogging)을 제거함과 동시에 관정 주변의 대수층의 투수성 개선과 산화환경으로 치환되며, 대수층에 잔존하는 철/망간의 산화물들을 관정내로 빼낼 수 있는 방법이다. 따라서 서징에 따른 폐색 제거효율을 검토한 결과에서 철 망간 이온농도 저감효과와 관정 주변의 수리전도도(hydraulic conductivity) 및 저류계수(coefficient of storage)가 증가한 것으로 나타났다. 이와 같이 강변여과에 의한 폐색은 미고결층내 공기주입 및 블록서지를 통하여 철/망간 이온농도 저감 및 수리특성 개선 효과에 유용한 것으로 평가된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.283-287
• /
• 2010

Stochastic simulation of hydrologic data has been widely developed for several decades. However, despite the several advances made in literature still a number of limitations and problems remain. In the current study, some stochastic simulation approaches tackling some of the existing problems are discussed. The presented models are based on nonparametric techniques such as block bootstrapping, and K-nearest neighbor resampling (KNNR), and kernel density estimate (KDE). Three different types of the presented stochastic simulation models are (1) Pilot Gamma Kernel estimate with KNNR (a single site case) and (2) Enhanced Nonparametric Disaggregation with Genetic Algorithm (a disaggregation case). We applied these models to one of the most challenging and critical river basins in USA, the Colorado River. These models are embedded into the hydrological software package, Pros and cons of the models compared with existing models are presented through basic statistics and drought and storage-related statistics.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.1
• /
• pp.1-10
• /
• 2022

Recently, due to the frequent occurrence of localized torrential rains and heat waves caused by abnormal climates. For this reason, it is necessary to develop an economical and eco-friendly rainwater detention facility that can secure the groundwater level through rainwater detention as well as flood prevention against concentrated rainfall by simultaneously implementing rainwater permeation and storage. In this study, the structural safety of an eco-friendly rainwater infiltration type detention facility made using eco-friendly inorganic binders including red clay was examined. Static analysis considering the constant load and additional vertical load and dynamic analysis considering the seismic spectrum were performed. As a result, it was found that the eco-friendly prefabricated rainwater infiltration type detention facility developed in this study has a maximum stress of about 68.1% to 75.4% and a maximum displacement of about 0.9% to 9.6% under the same load and seismic conditions compared to the existing PE block rainwater detention facility. It was confirmed that the eco-friendly prefabricated rainwater infiltration type detention facility secured excellent structural stability.